Your cart is empty.
Your cart is empty.The Westinghouse schoolhouse ceiling Fan light kit includes an energy and cost-saving LED light bulb that provides bright illumination. Long-lasting LED performance eliminates the need to change your light bulb in hard-to-reach fans. With a rich oil-rubbed bronze finish and white Opal schoolhouse shade, this energy star light kit adds traditional charm and blends well with a variety of ceiling Fan designs. This indoor/outdoor kit is damp location approved, making it suitable for locations like covered porches and patios. Westinghouse is a trusted, global brand. Westinghouse knows lighting and offers products with exceptional quality, reliability and functionality. Product reference number 77846.
Doug Danzeisen
Reviewed in the United States on February 14, 2025
A black fan with gold colored trim made choosing a light kit interesting. I settled on this because it offered a black interface to mount to my ceiling fan. Installation was really pretty simple to do, and very straightforward. The included 9 watt bulb is fairly bright, and a brighter bulb CAN be fitted if you need to. Note that this uses a standard base bulb, NOT the candelabra base bulb that many light kits use. Replacement, or higher wattage bulbs are easier to find. The light kit was easy to install and seems to be fairly high quality with sturdy pieces. I was prepared to gripe about the somewhat hard to grasp finger screws that secure the globe when I noted that in the hardware kit there were bronze colored screws that felt quite a bit better on tightening. That's attention to detail. The kit also includes wiring nuts to tie the wires together. My sole gripe was that the extension string for the light switch is kind of chintzy looking , although it is functional. I guess I'll eventually replace that string, but it does do the job. On the whole I'm quite satisfied with this light kit. It matches my fan, has good light output and seems pretty well made. Value for the money is a strong point and I recommend regular base bulbs to make light bulb replacement for higher output bulbs easier and easier to find in many cases.
Jeffrey T.
Reviewed in the United States on January 2, 2025
The color is a spot on match with my ceiling fan. It took me all of about 10 minutes to install.
The Glens
Reviewed in Canada on July 4, 2024
Surprisingly easy to install. I was worried that I would have trouble finding a light kit for an older ceiling fan. To attach to the ceiling fan I removed a small plastic plug from the bottom of the existing fan and then attached the light kit using threaded steel tube. Very simple.
creeker
Reviewed in Canada on May 16, 2024
It was very nice exactly as described . The base was too small for where I needed it . Nothing to do with the light .It was fine
Mitchell
Reviewed in Canada on February 8, 2024
Excellent, simple light kit. Worked perfectly on the Monte Carlo Colony II in our hallway. Had it installed in under 5 minutes, piece of cake. The finish isn't 100% exact but its not noticeable.
Mary E. Donnelly
Reviewed in the United States on December 14, 2024
I’m so happy that this was available. It was easy to install. Took me maybe 30 minutes to replace the old one with the new one. Sure saved me money as I didn’t have to replace the whole ceiling fan. And it actually works better than the old one!
Customer
Reviewed in Canada on August 5, 2023
This light was used as a replacement light for another fan system. The details explained about the product are accurate and I was able to use this light for another fan system. Very happy that it had the information in details so that I could do that for my new fan that didn't come with the light. Easy to use instructions and not complaints about installation.
Musical Help
Reviewed in the United States on July 23, 2023
Worked out great. Mounted my fixture to bottom of the ceiling fan in my RV camper (5th wheel with high ceilings) using the existing box cover and screws on fan. Now we can see in real good light instead of only the low voltage lights. It came with the bulb and a off/on pull string included. Caution: Check ceiling height and head clearance if using in RV like me, might not work for low ceilings.
Letter Addict
Reviewed in the United States on June 4, 2023
In answer to the headline question . . . it depends. If you're replacing an existing light kit on a Hunter fan, this will probably work with no issues. The problem comes in with adding this kit to a Hunter fan that has no light fixture. (I repurposed three fans from a 'no light' location to a 'gotta have light' location). The Westinghouse kit does not come with the adapter cap. If your fan came with an adapter cap, you kept it, and can find it, you're in luck. If you're like me, you have no clue where the cap might be or if you ever had one. A DIYer can remedy this by finding the existing cap center and drilling a 1/2" diameter hole (or slightly smaller because it's metric) and using that. The fixture works perfectly after this slight mod. If you aren't very handy with the tools, this kit isn't going to work for you. Granted, the modification is a small, relatively simple one, but some folks are gifted in different areas. The lamp has a clean, old time look and is of acceptable quality. The fact that there is no cap has nothing to do with the quality of the kit.
SC
Reviewed in Canada on November 23, 2021
Our original cover was broken, different style (mushroom) I changed the fittings to this one and it works perfectly.
"ylfreckles"
Reviewed in the United States on September 6, 2019
This light kit did what I expected, finished nicely, and the included LED bulb has the proper warm color for a bedroom. The only thing that I would have preferred is if the pull-cord for the light was a bead chain, instead of a thin cotton cord.
David Hostetler
Reviewed in the United States on May 13, 2019
This is a very basic little light kit. A basic pull chain switch, standard light socket, LED standard base light bulb. a nipple, 3 fitters of different colors, some screws, and some wire nuts. The globe is a basic schoolhouse style dome, it LOOKS nice. But the material used is insanely thin, and appears to be easily broken. I have had a LOT of light fixtures and globes over the years, and this one hands down is the most pitiful.So let's get to where the rubber meets the road. I installed this in my kitchen ceiling fan, a Hampton Bay 52" wtih an oil rubbed bronze finish. I followed the instructions verbatim to swapping the fitters around, pretty easy swap actually. And then performed the install. All went according to plan until I went to power it up.No light.Okay swap out the bulb for a known good CFL bulb. No light.I am uncertain of what the issue is here. I need to drop this down and meter everything now. But I followed the install instructions, white wire to white wire marked light kit, black wire to blue wire marked light kit, wire nutted and taped securely and tucked neatly back into the housing...Now it IS possible that when I installed this fan, the blue wire was left disconnected if the Hampton Bay instructions said to not connect it, I need to verify that.Even if this thing did work, I would still give it a 1 star review. Let me list the reasons.#1. Horribly thin and potentially dangerous globe.#2. Poorly machined threads for the globe secureing screws in the fitter.#3. ZERO instruction on how to wire it. I had to google this to make sure. They only mention how to physically mount it... Not make the electrical connections.#4. Non dimmable bulb. I am using this with a Hampton Bay Zigbee ceiling fan / light controller, and I dimmable is required.#5. The chain switch included feels incredibly insecure, like it is going to come flying into a bunch of little pieces every time I pull the chain. This could potentially be where the problem with this light kit is.#6. Overall feeling of cheapness / low quality. This is far and away NOT what I expect for the Westinghouse name. They have fallen a LONG way from the top quality electric parts manufacturer of my childhood...
Shel Marie
Reviewed in the United States on August 4, 2018
This Westinghouse LED light kit fit my Hunter fan PERFECTLY! I did have to alter one of the wires a bit (had to switch a male/female connector) but it was a simple alteration and saved a ton of money over buying the official Hunter light kit. The metal cap matches the metal of the Hunter fan and you'd never guess that the light wasn't made specifically for the fan it was installed on. I am very happy with the quality of the kit and the light output. I also appreciated that the lightbulb was included... saved me from making yet another purchase. I'll definitely buy again!
Recommended Products
