Your cart is empty.
Your cart is empty.Product Description
24 × 36’’x 0.2’’ （60x90x0.5cm）Corrugated Plastic Board
Our white poster board is made of high-quality plastic
Tested 0.2-inch thickness is more sturdy and durable, and still lightweight
Easy to cut, perfect for signs, school projects, crafts, art, backdrops, etc.
Easy to write and erase, can be used for various displays and presentations
Our poster board is waterproof and can be used for long-term use both indoors and outdoors.
0.2 inches thick
Waterproof
Easy to cut
Jennifer O.
Reviewed in the United States on March 10, 2025
I wasn’t entirely sure what to be expecting when this arrived. It is much thicker and sturdier than I was prepared for and I’m really happy about that. I make a lot of posters for various projects and these are perfect for when I am teaching music at church. These post awards are starting enough to stand up on their own with very little support other than leaning against Something. My markers worked very well on this poster board when it arrived. I thought it felt a little bit like a plastic key and so I worried that my marker might smudge, but it did not. I had zero problems with smudging, and I didn’t even have to give it time for the market to dry. These are, to me, very expensive, but absolutely worth the price.
Lisa
Reviewed in the United States on February 7, 2025
Good, solid corrugated boards. They arrived without any damage, and they were well-packed. I was really happy to see that the box actually mentions the plastic it's made of–polypropylene! That's exactly what I wanted because polypropylene happens to be laser cutting safe. It's kind of tedious to find the right settings, but once you figure it out, this stuff is great for all types of projects. You can also cut this with scissors or other tools, I just like how fast, clean, and easy it is with a laser.I personally use these to create lightweight signs and display stands for booths at art markets and conventions. It's super light weight, and you can stick vinyl designs to it super easily to create reusable and pretty sturdy signs. I don't have to worry about it getting wet or tearing, and it's relatively difficult to bend despite being thin. This size is especially good for large, eye-catching displays and signs.The only small issues I had with it were the specific measurements and the thickness. These are about 1/3" to 1/2" smaller than the stated size. It's not a big deal for me personally, but misrepresented measurements are always going to lose a star. The thickness they stated seems correct, but it's a bit more translucent that would usually be ideal for creating signs and posters, especially if you're making double sided signs.On the other hand, the translucency gave me some interesting new ways to use this. One of my photos shows light filtering through it easily. That's not ideal for opaque signage, BUT it's actually really good for creating temporary backlit signs or little DIY lanterns. It's an affordable, lightweight substitute for frosted acrylic, and it's a lot sturdier and larger than the cheaper options of tracing paper or butcher paper. You'll be able to still see the lines a bit, but I was happy to find another use for these.Overall, I like these a lot, which is probably obvious since this review is novel-length lol. Highly recommend.
Mish
Reviewed in the United States on January 9, 2025
I have purchased corrugated astic boards for different projects around the house such as room dividers, poster boards and even a door (square wood dowels in between 2 boards for reinforcement). They are light weight yet sturdy. And this one is really good quality! No damage at all as you can see from my picture, and it feels thick! I will use this as a shelf liner this time so it's perfect. This is a versatile product! Highly recommended!
Teddy Beaty
Reviewed in the United States on January 8, 2025
If you are hoping to use H stakes to install these in landscape mode, think again. The flutes on these signs run the long direction. I cut them in half and got two signs out of each; this way I could use them in landscape mode and double the effective use. I saved a few full signs for posting on poles or stakes, and in this case I wanted the flutes to run horizontally because it adds rigidity. I have bought 18x24 signs before, and their corrugations were a bit thicker than these, so that may also be a place where this product has room for improvement. I would recommend these as a valid option as long as you know the specifics about them (that I just told you) and as long as you don't think they have a huge value/dollar offer.
phil
Reviewed in the United States on January 6, 2025
Measured size: 23 9/16 x 35 3/8 - About 1/2 inches smaller than claimed in both directions. ('inaccurate' size description = -2 stars)The material itself is easy to cut, tape or glue together, and the ribs keep it sturdy. Surface is a satin type, and not glossy. Seems great for sign material. The internal ribs do slightly show through on the surface.At $9 each they're a little on the expensive side, imo. Aside from that and the inaccurate size description, they're great plastic panels.
Bob
Reviewed in the United States on January 24, 2025
I use these as protective screening on houses I've created for feral cats. I can get 48" lengths locally for the same price, but cutting them down to the size I need is a bit tricky (it's not an easy product to cut completely through, evenly for me. I've got a messed up arm that can't hold a straight edge securely on a slippery surface). So I got these for about the same price. They arrived quickly, packaged and protected very well. Quality was good. Corrugations were a bit narrower than some I've seen, but that's actually a bonus as far as I'm concerned.Corrugated plastic is great for signs, difficult to work with for packaging (it doesn't glue - you essentially have to "spot weld" it with a special tool). It also doesn't hold scores like traditional corrugated paperboard. If you need to bend it and want it to remain in that position, you can do what I do: Slit the top layer only (don't cut into the corrugations), insert two pieces of solid wire (clothes hanger wire is actually about perfect) in the end until the cut is in about the middle of each wire. Then bend so that the top cut layer and corrugated break while the wires bend and you'll have a fairly strong, structural bend. See the attached pics.
Matt M.
Reviewed in the United States on January 21, 2025
These corrugated plastic boards are super versatile. We used them for a school project and a yard sale sign, and they held up beautifully outdoors without bending or getting soggy. The thickness makes them sturdy, and the bright white surface is easy to write or draw on. Great value an it's nice to have them around - you never know when you'll need them.
Recommended Products
$15.39
$ 6 .99 $6.99