Your cart is empty.
Your cart is empty.50T35-743 Silicon Carbide Integrated Furnace Ignition Control Replaces Goodman B1809913S, Utec 1012-933D, Ti 41F-5, White-Rodgers 50T35-730. Made in United States. Manufactured by White Rodgers.
Robbysan
Reviewed in the United States on May 19, 2024
I thought I wasn't getting an output from my original board. I installed this and got the same thing. It turns out the motor was bad, but the new board does work. I now have a good known spare.
james kim
Reviewed in the United States on October 15, 2024
Comes 50t35-743 on board. Mine is 50t35-730. I took 15min. To install and work perfect overnight!! I saved big money with this product. Wow bang~~
Rock Star
Reviewed in the United States on December 12, 2023
I used the board to replace a Goodman b18099-10 and it worked just fine. You do need to read the instructions that are included, and you need to have a electrical meter and know how to use it to make sure that you are making the right connections. The furnace is a Goodman GMP 075-3.
builderbob
Reviewed in the United States on October 30, 2023
This board was advertised as a updated replacement for B18099-13 which was in my unit. This board worked perfectly! It contained good, well written instructions. This was a lot cheaper than a service call to local HVAC repair service!
Ray Phillips
Reviewed in the United States on December 7, 2020
I had my AC condenser drain get clogged up and it overflowed onto my circuit board. Instead of paying the repairman hundreds of dollars, I bought this and replaced it myself. It was pretty straight forward. All of the writing on the board matched mine, so I just transferred one wire at a time. After replacing the drain tube (which cost more than this board, lol) it fired right up and has been working all year. I've been able to use both AC and heat, trouble free.
KingBoy
Reviewed in the United States on December 2, 2019
This worked exactly as advertised, replacing a B18099-06 board on my Goodman GMP050-3 furnace. The instructions are clear and easy to follow. Replacement took about 30 minutes, being careful and methodical. Furnace fired up first time.
Josh H
Reviewed in the United States on June 3, 2015
My blower motor wasn't getting power from the main furnace circuit board. I bought it Monday afternoon and it arrived Wednesday morning. The two day shipping was money well spent. It took about 15 minutes to swap the board out and my AC was back up and running! The internet is amazing because I tried to buy this part locally and none of the distributors would sell to a home owner :(
Anonymous
Reviewed in the United States on October 8, 2012
The control board works fine. It was packed well and shipped promptly. It came with everything I might need to get the board installed. No problems here.I am knocking a star off because I was expecting it to have the same layout as the B1809913S control board in my circa 1996 heater (a GMPN 080). But this board certainly is compatible.The biggest difference is that this board gets its 24 VAC power through an included nine pin connector. The socket for this connector is the white socket in the upper left of the board. The 9 pin connector then replaces the existing leads to the secondary of the transformer. To pull this off, I had to remove and replace the existing ground wire from my secondary. This is documented in the included installation instructions. Most of the pins on the 9 pin connector are not used. You might have to cut a jumper wire preinstalled between two pins on the connector if you are installing this control board in a GMP or GMPV heater. Again, this is in the instructions.Many of the terminals are not in the same place as they are on my particular OEM board. But they haven't moved very far, and they are all well labeled.Oh, and this board has a jumper that allows you to select the blower off delay to 90, 120, or 150 seconds -- a feature my OEM board lacks.In addition to the aforementioned instructions and 9 pin connector, the board came with nylon standoffs, and replacement red, white, and green leads for my thermostat. There is a replaceable 3 amp fuse preinstalled on the board.
Recommended Products
