Shopping Cart

Your cart is empty.

Your cart is empty.

YAMAKATO Recoil Starter Pull Start Assembly with Pull Rope Cord for Honda GX120 GX160 GX200 28400-ZH8-13YA 28400-ZH8-013ZA, Oregon 31-052

Free shipping on orders over $29.99

$17.99

$ 8 .99 $8.99

In Stock
  • The GX160 pull start assembly is 410g(much heavier than low cost products), red color, plastic pawl, and it comes with an OEM nylon 66 solid braided rope compatible with Honda pull cord in 4.0mm diameter. The diameter of the rachet and the plastic housing is 51mm. Center to center of bolt hole is 139mm( triangle pattern), 160mm(hole to hole center through starter centre point).
  • Aftermarket standard for honda gx160 pull start assembly part# 28400-ZH8-13YA, 28400-ZH8-013ZA 28400-ZH8-013ZB . Comes with 1 recoil pull starter, 1 pull rope, 3 nuts and 1 decal in bubble bag and plastic bag packing, brand new.
  • Doesn't fit some GX series models. Please check the pully, pawl and rachet type, nut hole positions and product sizes with your orginal ones before ordering.
  • Fits for many Honda GX120 GX160 GX200 5.5hp 6.5hp models, replacement part for generators, lawn mowers, edge cutters, snow blowers, pressure washers, water pumps, ATV, mini bike, tillers, go kart etc.
  • Fits many generators powered by GX120 GX160 GX200 159cc 196cc 5.5 6.5 hp engines.



Product Description

YAMAKATO OEM Recoil Pull Starters for Champion Coleman Honda Small Engines

YAMAKATO recoil starters for honda clones

YAMAKATO series OEM standard Pull starters are compatible with Japan designed small engine and Clones, in generators, water pumps, lawn mowers, pressure washers, snow blowers, tillers, edge cutters, go cart, ATV and mini dirt bikes etc., also compatible with Harbor frieght Predator, Generac, Coleman, GPS, Champion, Troy bilt, ETQ, Centurion etc.

  • The starters can bear 8000 times pull test standard in small engine manufacturer's lab.
  • Comes with one OEM standard pull cord rope so you can replace one when breaking the pull rope accidently.
  • Please check the type of pawl and rachet at first place, also the positons and sizes of the six holes on the starter. Installation of a starter needs at least 3 holes to be fixed by nuts.
  • This product description is for different pull starter for 79cc 98cc 99cc 100cc 159cc 196cc 212cc 224cc models. Please check the product name and images to make sure you are ordering the one in need.

YAMAKATO focus on OEM parts of GX clones in low cost supply.

The position of our OEM parts is original from quality GX clone engine supply chains, such as venders for Firman, Champion, Predator, Rato, Loncin, Lifan... etc.

YAMAKATO focus on OEM Parts in low cost supply.

YAMAKATO focus on OEM Parts delivered in low cost

The following Asins are for more models available:

  • GX100 98/100cc red: B09Y3S2N9X
  • GX100 98/100cc black: B09YTCTFYS
  • 79cc/99cc black: B09Y46QSYL
  • GX120/160/200 red plastic pawl: B09Y47QZ61
  • Hexagon type1 159cc/196cc/212cc/224cc: B09Y48635Q
  • Hexagon type2 159cc/196cc/212cc/224cc: B09Y4BXQ3G
  • 212/196cc Red: B097MFW1YR
  • 212/196cc Black: B097MGB3K9
  • GX120/160/200 Red: B097MF94VJ
  • GX120/160/200 Black: B097MKN9VY
  • GX240/270/301cc Red: B097MH794N
  • GX240/270/301cc Black: B097MKCPT7
  • GX340/390/420cc Red: B097MJW9NC
  • GX340/390/420cc Black: B097MJNB2H

Bill V Pace
Reviewed in the United States on February 20, 2025
works well
David Edlund
Reviewed in the United States on February 13, 2025
I have a 4 HP Honda engine that needed a new pull cord and this pull cord assembly was quickly available through Amazon and it was easy to install and works great!
Christopher S.
Reviewed in the United States on September 17, 2024
Fit as expected but metal was a little lighter weight than original.
Michel Gallant
Reviewed in Canada on August 29, 2024
Exact fit et très satisfait pour le prix.
Jacob
Reviewed in the United States on May 5, 2024
When this product first arrived, it seemed like it was quality made, and would solve my issue in needing a replacement for my WP30 gas water pump. The entire mechanism fits perfectly and installed in seconds, as advertised. Even the first pull was perfect. The pump started immediately, and the cord retracted.After vibration of the pump disconnected the spark wire from the magneto, the pumped stopped. I was unaware of this issue at first, and attempted to pull the starter again. After about 4 pulls, the cord would no longer retract. The ratchets in the mechanism had become jammed in the ratchet guide and the gear on the end of the motor. I attempted to dislodge them with a screwdriver, but that did not work. After removing the entire assembly, the ratchets simply fell out of the pull starter.If the ratchets had been made of metal like the original pull starter had, this would not have been an issue. The cheap plastic used in the ratchets is not suitable for something with the compression of a several horsepower motor. If you are considering this product, think very carefully about its application. This is not a product intending to be long-lasting and durable. It may start your product, but you will be back in the same boat in short order.
Travis
Reviewed in the United States on March 14, 2024
Perfect fit and very well made. Sturdy and ready to bolt on straight out of the box.
Scott
Reviewed in Canada on November 30, 2024
Tried 5 different ones none of them worked, got this one and wow what a difference great recoil action and pull lever. What a great design. Definitely recommended
Dog Fan
Reviewed in the United States on November 13, 2024
Works great easy to install and seems to be built like the original we replaced.Each starter comes with 2 pull ropes tooI'd recommend this!!!
sean chase
Reviewed in the United States on October 8, 2024
E a sy to install worka great
Paramjit
Reviewed in the United States on November 30, 2022
Easy & simple fit. Works good so far. Value for money spent.
Recommended Products