Your cart is empty.
Your cart is empty.Product Description
Hey there! If you're looking to tidy up your home a bit, you'll love the Yecaye 304in cord hider kit. It's made of high-quality PVC material and includes 18 cable channels, a single channel that's up to 16.9in long. With this kit, you'll be able to conceal unsightly cables in your home.
No More Tripping or Messy Cords!
Need to hide just one cord? The solution is here! Our specially designed cord hider comes in a small size, making it the perfect fit for hiding cords connected to your computer, telephone, lamp, stereo system, and other home appliances. Trust us, it's never been easier!
-
Black
-
Brown
-
Grey
-
Beige
Chicabidee
Reviewed in the United States on March 11, 2025
Looked like it would have worked but I buried the wire and covered with ready patch and paint. So I returned the product. Shipped fast and securely.
nicholas brackett
Reviewed in the United States on February 28, 2025
Good price , great product
IBTS
Reviewed in the United States on February 25, 2025
I gave Yecaye 304in Cord Hider, a One-Cord Cable Concealer, a five-star rating for its ease of installation. In addition to its functionality, it looks great.
ogechi
Reviewed in the United States on September 11, 2024
The only draw back is the adhesive strips
runner50
Reviewed in the United States on June 7, 2024
Product works as advertised once it's installed. BUT, peeling ff the adhesion cover is VERY DIFFICULT! Have to use a fingernail to peel it back. VERY FRUSTRATING! Should make it so it's MUCH EASIER to peel.
roger slone
Reviewed in the United States on October 24, 2024
This item comes everything you need to cover one cable or a couple of small wires. Easy to cut, assemble, and come up with a nice looking project. Great value for the price, and if you don’t want to use the tape you can use small screws. For my application, adding a switch to an overhead light, was an easy cover up for the wires.
J. Alfred
Reviewed in the United States on April 26, 2024
Overall, I'd recommend this kit as it is well made, does the job and can cover a lot of space. I could see, however, that the installation might be tedious for someone not accustomed to figuring things out and the directions are no help. For example, it's not clear which side is the base and which is the cover (the cover fits OVER the base as shown on the outside of the box). Also, each of the covers must be cut shorter than the base as they fit partially into the joint covers, so you'll have to cut each cover even if you're using full runs of the base. Be careful not to abut the bases too close to woodwork or inside corners or you may not be able to snap the cover over the base. Once it's all done, it looks neat and tidy. I'd definitely buy it again, but I have a lot left over from my first install, so that's pretty good value.
Sirajul Islam
Reviewed in Canada on June 8, 2022
I recommend the product.
Cody Cormier
Reviewed in the United States on September 12, 2021
I purchased three of these kits to run two flat ethernet cables from a closet in my bedroom where my network is located. I was able to run the system along the baseboards and have it barely noticeable. I had to run over two different door frames in order to reach one location I needed, and across the ceiling to reach another location. Unfortunately as it's designed for 1 cable, there's no three way splitters included. Even though it can easily handle two flat ethernet cables. So in one T junction I had to leave the wires exposed. I also had to leave them exposed under the doorways as there's no clean way to implement that. The ethernet cable I purchased came with those small hooks that have a nail in them, and I was able to put both cables together with two of those under the doors very cleanly into the next wire covers.The adhesive is very plentiful as well, and some of the best Two faced tape I've ever worked with to take off the second sides piece. I was able to easily use my thumb nail to get the plastic off it and stick it to the wall.It did take a bit of work to get things lined up correctly, but I used the straight line pieces that came with the kit as spacers from the baseboards. Basically I would stick one on, get the next piece ready and then stick it in position. When I finished I had to go back through and take the covers off everything to put the cable in, but it seemed like the best way to ensure everything was lined up perfectly.I even did a small diagonal piece and the way the sections are made they can hide completely in the connector pieces. Very nice kit, especially for the price.
Diana
Reviewed in Canada on May 8, 2021
I have all kinds of wiring going all over my place because I use 12V solar power. I have a lot of areas where I need to run a wire up to a desk, etc. Not a big issue, but with this I can slip the wire inside and stick it to the wall. Then I take my mini air sprayer and paint it the same colour as the wall and you hardly notice it at all.The channel is just large enough to comfortably house one double wire which is all I need. The bonus is this set is not as bulky as the sets needed for several wires. The kit comes with the channels, tops for the channels and lots of different connectors to link the channels together.The setup is very easy. You can either slide the channel tops in place or you can place it on the one edge and flex and snap it into place on the other side. Everything slides together nicely and it looks good. I just have one complaint.Each section is just under 17 inches and the connector pieces are bulkier than the rest so you get these bumps every 17 inches. If they made them so they were the same size I feel it would give such a better look.
JohnWells
Reviewed in Canada on May 28, 2021
This is a comprehensive kit for concealing a single cable for almost any setup, with a total run length of just over 25’.The channels are very small – a 14AWG surge protector cable fills 100% of the channel. I’d hoped to use this upstairs since I only have a single (power) cord from the wall to TV, however the flat-style cord is too large for this channel (technically it fits, but twists the channel - see a photo attached). The channels easily fit a single 16AWG power or DisplayPort or HDMI cable, and could be used for a couple of speaker wires.The front covers snap on firmly. The couplings (which connect the 16.9” segments) fit over the segments, and will hide any imperfections caused if you’ve had to cut them down to size.Included are two rolls of double-sided tape.So far, I’ve only installed a single segment to hide a single HDMI cord running from my console to my TV (the other cords are run through a larger concealer channel).This size of concealer is ideal for a single standard-sized cable while maintaining as low of a profile as possible. If you have a larger single wire, you may wish to buy a larger channel kit.Overall, I’m really impressed with the build quality of this kit and how it looks when installed.
Vine Reviewer
Reviewed in Canada on May 14, 2021
It’s not meant for hiding a huge mass of cables so it’s not as useful in some setups. If you just need to hide one length of cable, it’s perfect! Other than some planning and measuring, installation is straightforward and simple. Apply the adhesive tape to the back of the cable raceways, section by section, and apply where you want it. Insert the cable right away or snap/slide the covers in place as you work. A different cable concealing kit I have included the option to screw mount the cable raceways instead of relying on adhesive tap, but that's not an option here.In this cable concealing kit you get 304 inches of cable concealment. This includes:18 x cable raceways (16.9 inches in length each = 304.2 inches)14 x couplings/connectors6 x flat elbow connectors (for making a 90° turn/angle along a wall)2 x inside connectors (for connecting raceways in the corner of a room)2 x outside connectors (for connecting cable raceways over a corner edge)2 x rolls of adhesive tape
Jason R.
Reviewed in Canada on April 20, 2021
I like the design of this better than some other cable covers which are relatively huge by comparison (and usually end up mostly empty), this is a lot more stealthy. It can fit a 14 gauge dual conductor wire with a large in-wall rated jacket but that's about it - still it's a lot thicker cable than I expected would fit through one channel. It comes with everything you need including connectors both straght and angled, and even tape to adhere the channels with. The channels are two parts, the part that goes against the wall and then a top cover for it - it's possible to snap the top cover over the bottom part but it's difficult and much easier to slide it from the side, but this is not very practical. Still, it's a lot better than having to try to fish cords all the way through a closed channel.The only thing I don't like about the kit is the connectors to join multiple pieces together, they're easy to use relatively and the channels just sort of slide into them, but each channel is short so you have these ugly bumps at pretty regular intervals along the run which I'm not a fan of. The other thing is that it's nice it comes with adhesive tape right in the box to use it, but I know from experience using this type of tape that it will absolutely destroy any paint you use it on so use it sparingly and wisely you are not going to want to have to reposition it after you put it on because it will take the paint off with it.
Recommended Products