Your cart is empty.
Your cart is empty.
YIZBAP 5x5.5 to 6x5.5 wheel adapters
Thickness: 2 inch (50.8mm)
Vehicle Bolt Pattern: 5x5.5 (5x139.7mm)
Wheel Bolt Pattern: 6x5.5 (6x139.7mm)
Thread Size: M14x1.5
Hub Bore: 108mm
PACKAGE INCLUDE:
2 x wheel adapters (2 inch per unit) with 12 open end 14x1.5 thread lug nuts
2x user manual
Compatible with:
2012-2018 Ram 1500
And more models
NOTE: Please make sure that these are the correct application for your vehicle. We do not guarantee any fitment onto any vehicle, we only guarantee that you will receive the item described above.
This spacer adapter includes open end lug nuts to secure the spacers onto your factory hubs
If your factory thread size is different from M14x1.5 - Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to:
1) Shorten the factory studs
2) The wheels need to have open slots (cavities) between mounting holes.
3) Purchase a set of shorter studs and replace them with the factory studs.
Lucas Alden
Reviewed in the United States on May 27, 2024
I've tried everything to do this right I cut my studs down I got the correct Bolts everything super tight I locked tightened everything And I have broke three out of the four wheel spacers now it's the Allen studs that have broke on all three they are not a strong enough material to hold up And it's scary when one breaks I'm shocked that somebody has not died because of these crappy wheel spacers this company's going to end up getting sued because somebody's going to kill themself because of the poor material that they use to make these
stoner
Reviewed in the United States on January 6, 2024
Delivery was quick and product was made well very happy
Iowa
Reviewed in the United States on September 29, 2023
Purchased 2 sets and all 4 adapters cracked in less than 10 miles! Wheel almost fell off and we could have crashed into another car.Trying to get my money back since the seller advertised '2 year warranty' but seller told me it's 'been a long time since you bought these'.I've been messaging back and forth for 4 weeks! What a joke. DON'T BUY THESE
Jack A.
Reviewed in the United States on July 5, 2023
I’ve had to take these off and put back on a couple times. There is no correct torque for these hex bolts. Not to mention, I’ve used the lowest amount of power to take these off and they continue to round out. I’d like to know where to find these hex bolts and if I could order more. I can’t find these hex bolts anywhere in stores or online.
Customer
Reviewed in the United States on March 8, 2023
Went on good. Had to cut my studs down. Haven’t driven on them much yet other than moving around the lot. I’m running them with 38.5s and 15x14s if I can run them anyone can I’ll keep y’all updated
Customer
Reviewed in Canada on December 30, 2022
These are a 2 piece design. The bottom piece that bolts onto the existing studs is only 1.5", so if you're studs are longer than 1.5" this will not work. There is no room for the top piece to bolt onto to the bottom piece if your studs are longer than 1.5". The quality does seem good and if this was truly a 2" spacer then it would have worked well. Measure your current stud bolts before ordering.
Jesus izazaga
Reviewed in Mexico on May 15, 2021
Ajustan perfecto en mi Tracker 2001
Jeivi Abraham
Reviewed in Mexico on March 5, 2021
El envio fue rapido, el empaque muy bien elaborado con su proteccion para no dañar las piezas, y sobre todo los espaciadores justamente lo que esperaba se ve muy buena calidad y excelente terminado le quedo perfecto a mi ford f100 🤙
Luke
Reviewed in Mexico on March 13, 2021
Yo quede encantado con el resultado! Hace ver mi jeep más ancho y fuerte! Lo recomiendo ampliamente
JESUS S.
Reviewed in Mexico on December 6, 2021
Super buenos, aumento muchísimo la estabilidad en carretera, a 150 km./hr. Sin problema en mi Hilux doble cabina.
Derek
Reviewed in the United States on November 23, 2021
Install is very straight forward. Would recommend using a torque wrench to make sure your bolts are on tight enough, but the hub-centric part of the spaces makes this very safe. I've been rolling around with these on for about two months now and I absolutely love the way they made my truck look.Heads up, I had just put 33" KO2's on my Tacoma before I installed these, and I had very minor rub on the cab mount, but with these spacers, I had to do a fair amount of trimming to stop the rubbing. I haven't done any off-roading since I installed these, waiting to do a lift so I don't have to work about rubbing when I go down a trail.
Tong Man
Reviewed in the United States on April 8, 2021
These are very quality spacers. I used it on my rears and it gave my wheels the perfect negative offset. Does not work on my fronts due to the hub design and the hubcentric portion of the spacers.
Alex
Reviewed in the United States on November 1, 2020
There’s not much to these, they have held up for about 200 miles that includes highway at about 80mph dirt and gravel roads with lots of bumps. No bending or snapping of pegs yet. These are really cheap compared to some that cost $200 but they do they same thing. I used these because my truck locked funny after having the wheels tucked when I put my fender flares on and 2 inches was the perfect amount I was looking for. Easy to install too about half an hour to do all 4
Recommended Products
