Your cart is empty.
Your cart is empty.Hope Wallace
Reviewed in Canada on February 3, 2025
Fairly easy to built. Some pieces were a bit bent but was able to make it work
fadingbeleifs
Reviewed in the United States on December 26, 2022
Contrary to what the site says, this DOES fit the Mitsubishi 3A92 engine in the 2013 thru 2023 Mirage.I've had this installed in my car for almost 2 years now, it works well, and makes it much easier on the engine on warmup, but this thing needs a MUCH better connector on the heater end, and better weather proofing of the connections.. a set of silicone plugs the could be cut to size would also be a welcome addition, as you could easily and safely put the cable through an opening in the bumper where its easily accessible but safe and secure, out of the way. Use zip ties on the cable to prevent it from wearing through the insulation due to vibration and to prevent it from getting caught in moving parts. Use silicone grease on the heater to allow for a good thermal contact, make sure the opening in the engine is VERY clean and do not run the heater without it installed or it will melt down and die. Best if you don't run it for a long time in an already hot engine. Use a timer if you wanna leave it plugged in overnight so your engine is warm in the morning.This will not get your engine to operating temp, it just drastically reduces the amount of time needed to warm up.
Customer
Reviewed in the United States on June 14, 2021
Wrong information, said it fits 2018 jeep compass.
Joel
Reviewed in Canada on March 8, 2020
This block heater fits perfectly into my Genesis Coupe 2.0T (2010) and warmed the block up with no issues. I did use Super Lube (98003) silicone heat sink compound for better heat transfer to the engine. I would like to see at least one more foot of cable but it wasn't a big deal.
Kindle Customer
Reviewed in the United States on December 28, 2019
Easy to get it and works great
alan wilson
Reviewed in the United States on January 14, 2019
excellent product,15 minute installation.Warms engine in less than 2 hours.
scott83
Reviewed in the United States on April 16, 2019
Bought this for my 2014 Hyundai Elantra for the cold Alaska winters. The installation was very easy and 4 months later it is still working as advertised!
klroger
Reviewed in Canada on December 26, 2018
Quick & easy to install. I put it in a 2018 Mitsubishi Mirage. Took about 5 minuets & I didn't even need tools. Easiest install ever!!!
Wire Nut
Reviewed in the United States on September 30, 2017
I purchased this for my 2015 Mitsubishi Mirage and it works perfectly. I even use it in warm weather to give the engine a head start warming up to operating temperature, where it is at it's most efficient. About an hour or so of warm-up with this block heater makes a difference in fuel economy, paying for the purchase price of this heater.Recommended!
Daktah Pepah
Reviewed in the United States on March 22, 2016
im happy my car has this style of heater rather than having to pull a freeze plug. just pop it in the hole in the back of the block and run the plug to the front, that easy. kept my coolant at about 75 when it was as low as -40 out which meant much faster warm up time for the engine and for the heater core.
ath
Reviewed in the United States on May 3, 2015
Installation in a manual transmission equipped Lancer takes longer. A few brackets and levers are in front of the port. Not a big deal to remove and replace.
Recommended Products
$104.00
$ 45 .99 $45.99
$99.00
$ 45 .99 $45.99