Your cart is empty.
Your cart is empty. Specification
1.Color: Green
2.Material: Plastic, Metal
3.Rated Voltage 150V AC, Rated Current: 6A
4.Withstanding voltage：AC1250V/1Min
5.Pin Distance: 2.54mm/0.1"
6.Wire Range: 26-18AWG
7.Temp range：-30℃-+120℃
8.Max soldering：+250℃5s
9.Torque：0.1Nm（0.88lb.in）
10.Stripping length：5.0-6.0mm
Package Included:
10 pcs Screw Terminal Block Connector
It is installed on the PCB board, Used widely in the electronics, communication equipments, instruments, calculator, automatic control system, domestic appliance and warning devices, PCB wiring, IC Socket, DIY PCB Universal Board, Dupont Line, Digital tube, PIC Programming unit, AVR ATMEL Programming unit,Connector Kit, USB to TLL Modules, Power Modules, RS232 TO TLLModule,Crystal Oscillator, buzzer, LCD Modules,Dupont Line,etc.
Lunix
Reviewed in the United States on February 27, 2025
Very cheaply made. One of the terminals will not close- had to throw that block away. These, at best, might be good for one-time or maybe a few cycles of clamping and un-clamping wires- if the terminal closure ever works. I recommend finding something better (and I am sure there are a thousand different brand names for terminals a identical to these), check the product info carefully.I checked another one before soldering it. After soldering it, it will not clamp (I am an EE, and have soldered hundreds of thousands of connections with every practical soldering method). These do not clamp the wire down like every other terminal of its type I've ever seen. They pull a metal block UP as you tighten the screw. It's a flaky design that is bound to have high failure rates. I regret my purchase, and the time I wasted.
Steve Kepler
Reviewed in the United States on July 28, 2024
Poorly constructed. Multiple terminals did not clamp properly. Definitely test each terminal before you solder to yourPCB.
James E. Loftin
Reviewed in the United States on November 25, 2024
quality is not good. some wont tighten
Tim D.
Reviewed in the United States on March 4, 2022
I thought I was buying standard typical .1 inch spaced connectors, but they were very tiny, fairly suitable for a jewelers screwdriver!
Computer Therapist
Reviewed in the United States on October 30, 2022
Good quality alternative to "Pig-Tails".
Mike S.
Reviewed in the United States on October 24, 2021
These screw terminal work well, and soldering onto a board provides a compact way to off-board your connections, but they do not work very well in prototyping with breadboard due to the length of length of legs.
Recommended Products
$18.00
$ 8 .99 $8.99