Your cart is empty.
Your cart is empty.Product Description
Duplex LC Connector
Compatible with both 62.5um and 50um LC cables; Supports OM1/OM2/OM3/OM4 fiber cables.
Durable Zinc Metal Enclosure
Protected by high-quality zinc metallic casing to ensure good heat dissipation and low electromagnetic interference.
Sturdy Protector Ring
Exhaust heat shield cover makes plugging and removing easier. Hot-Swappable is also supported.
Thick Gold Finger
Advanced electroplating process applied on the connecting finger, greatly improve corrosion resistance and stability.
Cliente
Reviewed in Italy on August 26, 2024
ottimo
MC
Reviewed in the United States on June 7, 2024
I bought these for my Dell PowerEdge R630, which has an embedded X520/I350 network card with dual 1G Ethernet ports and dual 10G SPF+ slots (Intel 82599ES controller).I have bought many, many 10Gtek SFP+ transceivers over the past several years (primarily for MikroTik devices), and I have never had a single problem with them.However, this is the first time that I bought a pair of these that came in a nifty little tin. Completely unnecessary, but a nice touch nonetheless! The insides are removable, so you can use the tin for anything you want. Neat!
jeremie lefebvre, Ascend ITS, Thailand
Reviewed in the United States on December 14, 2024
Excellent service as usual.Attractive price, Quick delivery (ahead of Amazone estimation) , Product effective and compliant with Aruba model as advertised.
Rhonda Lambert
Reviewed in the United States on November 29, 2024
My switch has 2 10 Gig ports I thought I would never be able to use, they were for connecting switches together. Now they are connecting my 2 servers to all of my other devices, with maximum throughput to all of my computers. All I did was add an inexpensive pcie card to the servers and away it all went. Plug and play. Amazon has a return policy, and you could buy them to
Alex T.
Reviewed in the United States on October 26, 2024
10Gtek is my default brand for transceivers on the cheap. They are reliable and compatible, which is what you should expect from such device. This one works well in my pfSense box with an uplink to ONT for a while now. Highly recommended.
K. J. Kehoe
Reviewed in the United States on October 14, 2024
Asus Rt ax89x, from Optimum Ont, Rj-45 10gb to Asus router roughly 2200 Gbs consistency. This is on 2 gig pipe.
Phil
Reviewed in the United States on September 2, 2023
This is an excellent little transceiver, and it fired up instantly when I plugged it into an Aruba 1930 switch, which quickly noticed it wasn't an Aruba component. It left a "non-compliant SFP inserted" error in the log, and the error beacon began flashing and has done so ever since. The transceiver, however, is working perfectly. Since the switch is in a closet, I don't care which lights blink as long as it's working. The transceiver has provided error-free gigabit service since it was installed. Very nice quality.
Septor
Reviewed in Canada on July 22, 2023
For those with modems which have a 10Gbps Ethernet port, this is a perfect SFP module to link to your router. I use the SFP module in my Mikrotik router and connect my Bell modem's 10Gbps Ethernet port to it, allow my router/switch to access all of my Internet bandwidth. Works perfectly with Mikrotik RB4011IGS.
SubaruTrekkie
Reviewed in Canada on October 6, 2023
Took a chance to see if these would work on EX series Juniper switches, worked perfect. I have them in both 2300 and 2200 and each recognize as 10Gb modules, works immediately after inserting. I did halt the switch prior to installation so a full boot recognized but they do work simply inserting while running.
Luis Torres
Reviewed in Mexico on July 17, 2022
Es un producto increíble, no le pide absolutamente nada a uno de Cisco, me gusta la presentación en la que viene.Tengo en producción 4 de estos y jalan sin ninguna dificultad, consulto le estado de puerto y efectivamente es 10g
Miguel Angel
Reviewed in Spain on January 13, 2019
Funciona bien. Embalaje muy adecuado para evitar un indencias. Respeta la velocidad y en ensamblado se hace sin problemas
David W Studeman
Reviewed in the United States on May 11, 2018
I am using four of these so far with Cable Matters 10Gb 40Gb Multimode Duplex 50/125 OFNP Fiber Cable (OM3 Fiber Optic Cable / LC to LC Fiber Patch Cable) to use with Four Luxul AMS-4424P switches in stacked mode and it works flawlessly. For those who do not know, managed switches that support stacked mode and ARE being used in stack mode, act as one huge switch where you only need the IP of the master switch and only will be logged into it's web server. Firmware updates, reboots etc will affect all of them at once yet still allow fine grained port settings for each switch in the stack. VLANs apply to the whole stack not just one switch. This model of switch I use only allows 10gb connections between switches via SFP. The thing I like about the MMF I used is that it is so much less bulky than copper and collisions are impossible since there is one fiber for each direction so they can be very far apart and still behave as one huge switch in one spot.These SFP modules are an incredible value to the point where you may second guess, well don't. Try them! They aren't even advertised for my switch as being compatible yet they clearly are. How many people use Luxul AV type managed switches with rear entry (the reason I bought them)? Not a lot I'm sure just as would be with Pakedge products (also have rear entry AV models).
pn
Reviewed in the United States on November 26, 2018
--- Update 12.17.2018---I had a pleasant and very professional conversation with 10Gtek. They immediately offered me a full refund. Their engineering team managed to replicate the problem and are currently investigating. Once the problem is fixed I will update the overall rating to 5 stars.--- Review ---I am having a strange problem with these transceivers and I have no explanation. If you have any idea please share.I have two computers directly connected with these transceivers via 1m fiber cable.Computer "A" is Dell Precision workstation with Intel X520-DA2Computer "B" is Supermicro X9DR7 with Intel X520-DA2Every time "B" gets restarted or powered on, the audio on computer "A" stutters for 1 second and at the same time the picture freezes. It is the most noticeable when watching youtube videos. This happens a second or two after you press the power button on computer "B" - in other words it has nothing to do with the OS on computer "B". On "B" I am running XenServer and I am passing through X520-DA2 to one of the VMs. The moment I power on this particular VM the problem appears again - the sound stutters and the picture freezes for a second on computer "A". I did dozens of restarts and power ons/offs and got really frustrated. The moment I unplug the fiber cable from the transceiver and there is no stutter. I don't even have to unplug the transceiver from the network card. The moment I plug the fiber cable back in and the problem returns. Although the 10Gb communication works between both computers and although I will not be restarting the server very often, the stuttering audio and frozen picture is unacceptable for me.After a month I decided to see what will happen if I use Passive Direct Attach Copper cable. Got one from the same seller (10Gtek) and same length - 1m. And to my surprise I no longer can reproduce the issue. It looks like the DAC cable solves my problem. The question is why?Unfortunately I cannot return the transceivers since one month has already passed. I will gladly update the review and the rating if someone gives me an explanation and a solution.
Recommended Products