Shopping Cart

Your cart is empty.

Your cart is empty.

1200W Pure Sine Wave Inverter with AC Charger, DC 12V to AC 120V Output,UPS Backup Power Low Frequency Inverter for Lithium, Sealed,AGM, Gel,and Flooded Batteries

Free shipping on orders over $29.99

$175.00

$ 79 .99 $79.99

In Stock

About this item

  • This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch. High transfer efficiency is above 90%, , complete isolate surge interference of input & output's voltage and current, Impact resistance, super load capacity, built-in AVR stabilizer, continuous stable pure sine wave output.
  • Battery typesetting choose : SLA / AGM / GEL / Li-ion battery & Customize. Support lifep06,Sealed Gel AGM Flooded Lithium Batteries
  • Adjustable Charging Current: The max charge current can be adjusted from 0%-100%, 100% is max charge current 15A. Setting the value to 0% will turn off the charging function.
  • Five working mode : AC priority mode / Battery priority mode / Generator mode / ECO mode / Unattended mode. When AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. When you choose battery priority, the inverter will invert from battery dc to ac output . Battery priority mode & Unattended mode have Low volt restore setting and Low volt protect setting.
  • Protections: Battery low voltage alarm / Battery high voltage alarm / Over temperature protection / Over load protection / Short Circuit protection. 110%-120% of the output was maintained for 30s, then the output turned to bypass, more than 160% maintained the 300ms.



Product Description

`

Ampinvt 1200W Pure Sine Wave Inverter 12V DC to 120V AC Parameter

Rated Power : 1200W
Peak Power : 3600W
AC Input : 120V±25%, 60HZ±5HZ
AC Output : 120V±3%, 60HZ±0.5HZ
Max AC Charge Current : 15A
Wave Form : Pure Sine Wave
Transformer Time : ≤8ms
Transformer Efficiency : ≥90%
Battery Voltage : 12V
Battery Type : GEL, SLA, AGM, Flooded, Lithium(lifep04)
DC Charge Voltage : 13.8V
Overcharge Protection : 17VDC
Operating Temperature : 0 ~ 60℃
1

Ampinvt 1200W Pure Sine Wave Inverter

  • Five modes of operation, working Mode(optional): 1.AC Input Priority; 2.Battery Priority; 3.ECO Mode; 4.Generator Mode; 5.Unattended Mode.
  • High transfer efficiency is above 90%, , complete isolate surge interference of input & output's voltage and current, Impact resistance, super load capacity, built-in AVR stabilizer, continuous stable pure sine wave output.
  • Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)
/Back feeding protection
`

This Power inverter is able to charge the battery bank when AC power is connected to the inverter.

This inverter can ONLY work with 12V battery system.

The inverter CAN NOT can in parallel

Battery MUST BE connected first

1200 watt is continuous output power, peak power is 3600W

Package included:

  1. 1*1200W Inverter
  2. 1*User Manual
1

Note: Different types of loads have different starting impulse currents. Customers need to select the appropriate inverter model according to the actual equipment power, current, and load characteristics.

What kind of the inverter is suitable for your appliances?

Pls know that load is divided into resistive load and inductive load .If you need the inverter to run the resistive load (like laptop, TV, electric cooker ), please choose the inverter with continuous power higher than the appliance's rated power. And it is best to use 80% of the rated power. If you use microwaves, water pumps, air conditioners and other appliances with motors or compressors ,please choose the inverter whose continuous power is 3-10 times higher than your appliances.

Working Mode Setting:

1. AC/Line priority mode -- always use ac power as priority input, provide ac output, and automatically charge the battery.

2. Battery priority mode -- Priority should be given to battery power supply. After low voltage protection, the battery will be transferred to ac grid power supply. When the battery is full, the battery will be transferred back to battery power.

3. ECO Mode---Load < 10% automatic sleep and stop output, load > 10% automatic boot back to normal inversion.

4. Generator mode -- The generator is connected to the AC input of the inverter, and the output is stabilized through AVR while the battery is recharged.

5. Unattended Mode---When the battery is low voltage, the inverter goes into standby state(Power saving state). When the battery restores the voltage value set by yourself (such as solar charging), the inverter will restore the normal output of the inverter, and realize unattended full automatic operation!

Rated Power 800W 1200W
Battery Rated Voltage 12V 12V
AC input 120V 120V
Output voltage 120VAC ±3%(battery mode) 120VAC ±3%(battery mode)
Size 290*137*310 mm 290*137*310 mm
RS485
LCD Display
Weight 9kg 10kg

Exelente producto
Reviewed in the United States on March 3, 2025
Exelente producto, lo recomiendo
bikerider
Reviewed in the United States on February 3, 2025
Seems to be a well-designed and manufactured inverter. I use it as a long run time uninterruptable power supply for my 3D printer. 3D prints can take many hours to complete, and electric grid repair can also take many hours to complete, so a standard UPS would not have provided enough battery backup for the print to finish. The Impinvt 1200w coupled with 2 large deep cycle batteries is just the ticket for success. The only downside I can list is the battery cables are pretty cheap and probably need to be replaced if you are going to use this inverter at its maximum 1200 watts.
Phase Shift Engine beats All
Reviewed in the United States on February 23, 2025
Has worked great.love how it clicks, turn on. Has acted up a bit fake charging and throws an error so pay it due attention. Restarting helps and it will charge battery if its turned off.
C. Taricska
Reviewed in the United States on September 5, 2024
I set this up to run my sump pump when we lose power. So far it has worked flawlessly. It switches over to battery power practically instantly when we lose power. I have it connected to a 100 amp/hr battery and also have powered my refrigerator during two recent power outages, with no issues. Much easier than dragging out the generator into the yard and running extension cords into the house. Keeps the battery charged and ready for use. No issues with connecting battery and charging function. Be warned that the cooling fan runs all the time so make sure you have this mounted behind closed doors or somewhere the humming won't bother you.
M Sanders
Reviewed in the United States on October 31, 2024
Living in Ecuador where we are experiencing an energy crisis, there are days that we lose power for as long as 14 hours. I need(ed) power for my critical items, CPAP, router and computer (since I work on-line.) I shopped around looking for a unit that would have a built in battery charger and an ATS to automatically switch back and forth between normal and emergency power. It also needed to generate a Pure Sine Wave due to my CPAP (that's what many CPAPs require). I decided to roll the dice and purchase an Impinvt 1,200 watt inverter. I "was" a Tripp-lite guy, but the models I saw were far too pricey and I didn't see evidence that they generated Pure Sine Wave.My biggest challenge was finding deep cycle batteries. Prices for anything of an electrical/electronic nature have skyrocketed due the current situation. Once I completed my installation I discovered that it has enough output to also keep my refrigerator going which is a true god-send. The last thing we need is to get sick due to food not being kept at proper temps.The installation was very easy. Due to having worked with inverters, generators, ATSs and more, it was a no brainer. My batteries are ideal for the situation (better be for what I paid for them), so thus far we have more than enough juice for our needs.While powering our frig, my CPAP, several LED lights, 2 UPSs (which multiple chargers plugged into them) - my inverter panel shows a 5-8% load. If I am interpreting that correctly; it is indicating that I have only scratched the surface and my unit is capable of powering up many more items. So far it has worked flawlessly.Besides being able to work when others cannot, there's the wife situation. Happy wife, happy life. Having provided for our energy needs has made my wife more tolerant of her good looking but annoying husband. So...thank you Impinvt!If anything changes, I'll share that too.
alejandro luna
Reviewed in the United States on October 26, 2024
If you don't mind losing money, you can buy this cheap inverter, it works for a few weeks and it stops working, when you go to ask for the warranty, they give you thousands of excuses... I lost money buying this inverter and I lost money hiring an electrician to check because it stopped working... All the tests were done, it was connected directly to AC, the battery was replaced and it simply didn't work.
Cliente de
Reviewed in Mexico on October 24, 2024
es excelente para respaldo de energía, no recomiendo aire acondicionado debido a que no esta diseñado para algo con picos tan variantes, alimentamos equipos de redes y hasta ahora un excelente desempeño
Bryan G.
Reviewed in the United States on October 13, 2024
This item works perfect to keep my sump pump running if the power goes out. Good build quality, easy hookup. Getting it setup (programmed) is a bit tricky. I have not figured out if I can set a minimum voltage for cut-off and the cooling fan runs all the time even when the unit is not working as a passthrough when shore power is on or when its using the battery. When its running an item the fan speeds up even more. It is loud enough I can hear it upstairs. I think the fan should only run when the unit is actually powering an appliance. I tested it by turning off the breaker feeding it while the sump pump was running. Instantly switched to battery power. When grid power is turned back on it starts re-charging the battery. It keeps the PowerQueen 100ah battery topped off . Once setup, there is nothing more you need to do. Been using this for a few months now with zero problems. Peace of mind when im away from home.
Marco
Reviewed in Mexico on February 27, 2023
The media could not be loaded.
Verified Customer
Reviewed in the United States on January 23, 2023
Original: The unit I ordered arrived defective. The LCD was nonfunctional, although the backlight did illuminate. The indicator lights worked expected, and the service receptacle problem noted in other reviews was present, however without the ability to configure the unit I cannot blindly keep this connected this to a good battery for any significant period. Updates to follow examination of the replacement unit.Update 1: I received the replacement unit. Without power there is continuity between line and load sides of W and G, and not L1. The original unit battery light was green, while the replacement unit battery light is yellow. The original unit was missing battery conductors and yet for some reason had a standard PC 5-15P/C13 power cable. Update to follow with a scan of the manual and, following that, a menu button flowchart.Update 2: The second unit has performed well. I do wish the battery settings had separate charge start and charge stop settings to allow for different resting and charging voltage, but it does not. I have added manual photos.
Recommended Products

$15.30

$ 6 .99 $6.99

4.3
Select Option