Your cart is empty.
Your cart is empty.Product Description
16 in 1 Drinking Water Test Kit Strips
Easy and safe to use!
Just dip the strip, wait 60 seconds, and compare the results to the color chart! Included with our strips you will find a helpful full-color guide with more information about the significance of the test parameters and the EPA standards for safe ranges of heavy metals in water.
16 in 1 Drinking Water Test Kit Strips, 200 cnt
Home Water Quality Test for Water
Med Lab Diagnostic's drinking water test kit is great for testing the quality of different water sources. Our kit contains 100 water reagent test strips in two sealed pouches of 50 each for longer shelf life. No need to spend a lot of money on expensive drinking water test kits or pool water tests. With our home water test, you can test your drinking water, tap water, well water, ground water, pool water, hot tub, and spa.
- Easy to Test: Drinking Water Test kit for each in home use. 16 parameters tested. Quick and Easy to Use
- Quality Test: Our Water test strips provide Accurate Results for testing various water sources
- Instruction Guide: Our Water Reagent Strips come with a full color guide with information about each of the 16 parameter tested
- More Strips: We include 100 test strips in two sealed pouches of 50 strips each for longer shelf life
100 Quality Test Strips
Quick, Accurate Results. Easy to Use.
Easy to Read Instructions
Our Water Reagent Strips come with a full color guide with information about each of the 16 parameter tested.
Longer Shelf Life
We include 100 test strips in two sealed pouches of 50 strips each for longer shelf life.
Every product comes With An Extra Large Color Chart Insert With EPA Limits built In.
There are 16 parameters our water test strips can test for:
Lead, Fluoride, Iron, Copper, Mercury, Total Chlorine, Nitrite, Nitrate, pH, Total Alkalinity, Total Water Hardness, Aluminum, Sulfate, Bromine, Free Chlorine, and Cyanuric Acid.
Our reagent water test strips also have low-level detection range for heavy metals.
TEST YOUR WATER WITH CONFIDENCE
S
Reviewed in the United States on February 25, 2024
I got the same results, testing tap, filtered and bottled water. I live in the mountains with quality well water, its just hard water, but it shows high concentrations of fluoride. A lab test showed no fluoride. How can I have fluoride in my well water? Also, the stripes are hard to read, because the chart they provide is not the same scale size, so it is very hard to compare because they don't line up side by side. Think I wasted $20, only because I cannot trust results.
kofi k
Reviewed in Canada on December 30, 2024
received item expired, sent back and got my refund.
Dan O.
Reviewed in Canada on December 29, 2024
Purchased to measure fluoride level in well water. Difficult to read and does not correlate with lab results. A waste of money!
EJ
Reviewed in the United States on July 19, 2023
They were very easy to use and get results. It was also a great value.
Customer
Reviewed in the United States on March 11, 2023
Love that these strips are able to let us know all of the different things that might be in our water, as well as the alkalinity levels!! Now I know that not only does our well water taste delicious, it is totally safe, with no chemicals and also is alkaline and not acidic!! Such a nice thing to know!!
William H.
Reviewed in the United Kingdom on March 30, 2022
I tested normal tap water, then filtered the water using a Berkey water filter and retested. The results were the same. Either the filter strips don't work or is it the Berkey water filter?.So I tested shop bought bottled water and the results were all the same. To me this suggests that these water testing strips are not fit for purpose because they keep giving out the same results, whether it be normal tap water, bottled water or filtered water. A complete waste of money!!!
AlexanderTgreat
Reviewed in Canada on October 14, 2022
Easy to use. Only complaint is that the chart is a little small. It’s expected considering the size of the container. Great overall product.
Alexandre
Reviewed in Canada on September 7, 2020
Pas mal, sauf.......que jaurais aimé une fiche version francaise et un guide informatif pour chaques éléments testés
Todd Benoit
Reviewed in the United States on August 20, 2020
The customer service is great.As it is a container of two 100 count packs I wish the shelf life was a bit longer after a pack is opened. Just 90 days.The strips mostly read as they should although I did have a couple of inconsistencies from one strip to the next. I was able to contact customer service through e-mail and their Youtube channel for guidance.
ʀᴜʙʏᴏɴᴛʜᴇʀᴇᴢ
Reviewed in the United States on March 13, 2020
This water test kit came as advertised -- perfectly sealed bottle under the lid, and with two sealed packets inside dividing the test strips in half.Easy to use -- my only issue was after testing, where excess water on the strip could cause color runoff from one test pad to another (which may affect accuracy due to color mixing). The instructions do say to "carefully shake off any excess fluid" but maybe I just need more practice? For this same reason, it would have been nice if the color guide were laminated (in case water were to fall on it).
Ohio
Reviewed in the United States on January 30, 2020
I wouldn't purchase this product and I am returning it because it is not accurate and the colors bleed on each other interfering with the accuracy of the color pads next to them.I ordered this to test my tap water, RO system water, Culligan 5 gallon delivered water, and Nestle Pure Life bottled water.I tested each type of water at least four times. Ironically none of them showed fluoride and I know our city water/tap water has fluoride and other things but the test strip did not pick it up.Regarding the colors bleeding:Originally I tested the strip straight up and down dipped into the cup of water but that really made the colors bleed.So then I tested the strips by turning the cup more on its side to keep the strip straight while in the water and then I removed it and put it on the paper towel so it would continue to lay flat to prevent the colors from bleeding onto each other.The colors bleed on each other with either dipping method, which is super pointless for two of them because one pad is yellow and one pad is green and the green color ends up running into the yellow pad.. but that yellow pad is supposed to turn more greenish to indicate good alkalinity and its hard to tell for sure if it is turning green on its own or if the color beside of it has bled onto it.
P Then
Reviewed in the United States on December 6, 2019
I think this set of filter paper strips does what it's supposed to do! You can't compare it in terms of accuracy to lab tests. If you're looking for that kind of accuracy, you should just send your sample to a lab. What this strip does is that it can give you a ballpark indication of what's in your water. Or at the very least, a positive / negative indication of presence / absence of a compound.It did take a couple of tries to come up with a technique. Other reviewers have mentioned that the colors tend to run, and that does happen. But I'm pretty sure the same will happen with other brands of strips with multiple tests on it, and there's more than enough strips to experiment with. I found that if I used a fork to put a small drop of water onto each square while the strip is laying flat on a paper towel, I can get by without having the colors run into one another. Of course you should rinse the fork with the water you're sampling thoroughly before using it, and change forks for different water samples etc.For the waters I tested, the strip showed that the tap, boiled tap, bathroom tap waters all have higher pH, alkalinity and hardness when compared to my filtered water, which makes sense to me. I was actually looking out for lead, but I guess there's no lead present in the waters I tested.
Kindle Customer
Reviewed in the United States on October 31, 2019
The test strip instructions and match comparison to the test result chart were easy to understand and use. Rather then relying simply on the taste of the drinking water after Reverse Osmosis treatment, wanted to actually know what we were drinking and received an easy to read composition of elements and their strength. We got a clear reading and were happy to learn there were no harmful elements in our drinking water. Next, we will be testing our regular house water for softness/hardness. We are confident this test will be equally simple to perform. We are happy with our choice.
Recommended Products