Your cart is empty.
Your cart is empty. How to use:
2-IN-1-OUT: Connecting 2 audio sources (like active microphone or MIDI key board) to A/B ports and 1 audio receiver device (like recorder / microphone mixer) to I/O port.
A/B selector: select audio input or output from A or B channel.
MIX switch function: set the KN102 work at Mixer mode or A/B selector.
Notice:
1. In normal mode, A or B channel will input or output independently. While in mixer mode, A and B channel will combined input or output at same time(A/B selector will not work).
2. When A and B channel input at the same time, two input audio device must be the same type otherwise they will interfere each other.
Parameters:
Connector: 2*Female XLR and 1*Male XLR (2-IN-1-OUT)
Material: aluminum
Color: black
Dimensions: (L)58mm*(W)88mm*(H)30mm
Net Weight: 200g
Packing List:
1 * XLR Audio Switcher
Vladimir
Reviewed in Mexico on September 21, 2024
Con un solo canal de audio XLR puedes literlametne hace que tenga dos. Yo la uso en una interfaz de audio WaveXLR y puedo usar dos microfonos, tanto intercalada mente, como en conjunto. y aqui es el unico problema, cuando usas ambos ala vez, apesar de compartir la misma gancia, uno termina sonando mas que otro, como si la corriente se dividiera y uno se llevara mas parte por lo cual amenos que sepas maneja muy bien la microfonia y seas ingenioso, es una compra un poco dificil para tener ambos microfonos activados.En cambio si lo que buscas es poder cambiar de un microfono a otro sin tener que contectar y desconectar, AMIGO, ESTA ES TU COMPRA. (lo se porque ees es mi caso)Hice pruebas de comparacion de ruido de piso con y sin este aparato y en ningun caso mete ruido de piso extra mas que cuando estan ambos activados puede llegar a ser un poco mas pero por obvcias razones, ya que son 2 microfonos sumandose a la misma pista de audio. Quien entienda, entendera.
Another Literary One
Reviewed in the United States on June 20, 2024
Does exactly as expected: allows one to plug two XLR feeds into one XLR input in a mixer or amp. Levels on mixer might have to be higher than your typical settings for the dual input but negligible signal loss if any.
Elephant Master
Reviewed in Japan on March 26, 2024
写真の様にSax用のマイクとDI経由のEWIの切り替えとして使用しています。この使い方ですので、切り替えはフットスイッチ仕様のモノもあれば嬉しいです。もう1個買って改造しようかな？！
A Brown
Reviewed in the United Kingdom on February 17, 2024
Had a 4 input audio interface. Got the following vocal mic, acoustic mic, stereo guitar signal and bass. Thats 5 inputs! Was fed up constantly having to re adjust signals and setups by which time the riff/idea had gone.By using this I was able to run the vocal and acoustic mics via this switch. Most of the time I use one or the other. This allows me to switch between. Plus........also has a useful mute switch which avoids feedback when monitors are in play.Yes, you get some switching pop but not an issue as Im not recording at that stage.
M. Marks
Reviewed in the United States on November 17, 2024
It works ok but it so light weight hand to Velcro it down.
Debbie C.
Reviewed in the United States on November 12, 2024
Item’s two outputs front single mic input did not work when use un combination with a guitar effects pedal. Not sure if device was defective or not able to use in this manner.
Daven E.
Reviewed in the United States on October 24, 2024
As anticipated. Nothing outstanding to report.
Chris T
Reviewed in the United States on April 28, 2024
I am a voice actor with two microphones and one preamp. This product is a absolute time/frustration saver. It puts both my mics right in from of me. No more reaching behind the equipment to blindly switch cables! And it's a breeze to set up!
John Magill
Reviewed in Canada on September 24, 2023
I have a 2 input interface that I run 3 separate rigs into. This switcher allows me to do that without constantly unplugging one of the inputs to connect another. And I don't hear any tonal difference with it in the signal chain. Recommended!
Klaus Tort
Reviewed in Italy on February 20, 2023
Collego due microfoni a un medesimo strip channel e non introduce il benché minimo disturbo, ronzio o fruscio, sia alternando i mic in inout che in mixing. Robusto e affidabile.
Basilphart
Reviewed in the United States on December 23, 2023
Very well built. Smooth operation. No clicks, crackles, or buzzes -- I see some reviews stating it somehow does that. Not a bit. I have a music/voiceover/movie post (Foley) studio, so it's convenient to leave mics in situ, and switch to required mics: have used with Focusrite and SSL interfaces connected to Neumann, Sennheiser, Warm Audio, and Audio Technica phantom condenser mics, active ribbons, and various Shure dynamics, with nothing but refined behavior. It's so good, I bought another!
Fish & Poi
Reviewed in the United States on December 20, 2022
At our church, we have a translation transmitter with an XLR jack. We usually plug a microphone directly into it. Now, after adding this device, we can switch between two microphones and we have a convenient mute switch, too. In our application, we are not getting any popping when switching inputs or using the mute switch. Build quality seems good.
Edward
Reviewed in the United States on November 21, 2022
Build quality was good, buttons function well. Have two of them on powered monitors to turn them on and off and also send a line out to a IEM's really nice for the price. zero signal lose on single channel and no noise once changed
Recommended Products
$1,295.00
$ 99 .00 $99.00