Your cart is empty.
Your cart is empty.Product Description
Our Highway Foot Pegs offer aluminum spacers in three different thicknesses to make the product suitable for use in 7/8 inch (22 mm), 1 inch (25 mm), 1 1/8 inch (27 mm), or 1.25 inch (31.75 mm) bars.
7/8 in / 22 mm = (1.25 inch (31.75 mm) clamp and Aluminum alloy gasket) Fits bars under 1 inch (25 mm). Some European bands such as Outback Motortek, Wunderlich use 22 mm diameter bars.
1 inch / 25 mm = (1.25 inch (31.75 mm) clamp and Aluminum alloy gasket) Fits 25 mm bars most European brands use. Such As Touratech, BMW And So On.
1 1/8 inch / 27 mm = (1.25 inch (31.75 mm) clamp and Aluminum alloy Fits bars over 1 inch (25 mm). Some European brands use 27 mm such as SW-MOTECH.
1.25 in / 31.75 mm = Fits bars that offer real protection, some segments bars for larger bikes.
For the full range of possibilities rotate the clamp.
- The brackets that mount to the Bars have four selectable position holes. There are six selectable hole positions in the pedal mounting head. This means that there are a total of 24 selectable angles.
- Position at any angle to customize the fit on your bike.
Custom cast 304 stainless steel clamps, to create enough clamping force to prevent pegs from spinning on the bars.
Feature a deep knurling to provide optimal traction for your boot. Increase The Thickness Of The Clamp.
Mounted with a ball detent to keep footpegs stationary whether folded in or out.
For bar diameter, sizing, & placement options, see infographics in the photos.
When finding your preferred position, ensure you are lining up the holes for the M8 fastener.
During installation, it may be helpful to sit on your motorcycle in order to discover the most comfortable position.
The pegs can be position at any angle to customize the fit on your bike and increase your comfort.
Jose Taboada Casillas
Reviewed in Mexico on September 24, 2024
Todavía no los pongo en la motocicleta..pero se ven de muy buen acabado ..@
Larry Leslie
Reviewed in the United States on May 8, 2024
Overall, I am satisfied with this product. Instructions were almost none existent. I had looked at many different manufacturers, so I was able to install without issue. I was also very pleased with price point. To date the quality appears to be good.
4K Motoring
Reviewed in the United States on March 28, 2024
Very happy with overall quality of kit. Included instructions were nonexistent, but video in product description shows installation process well. Several critical fasteners had no locking method and seemed likely to vibrate out over time. Loctite is recommended. Fit and finish are good, seem like good value.
Michael M
Reviewed in the United States on November 13, 2024
These are very well made with all the hardware options you might need for a variety of applications. That said they are not going to work for my application.
Geoffrey Haby
Reviewed in Australia on January 6, 2024
well made but feel is a bit week where peg locks down, time will tell.
Customer
Reviewed in Canada on January 11, 2024
Wanted highway pegs for leg change of position
Loic
Reviewed in the United States on September 18, 2023
Very well packaged, no instructions . Seems to be nicely built. Paint look a bit thin. (Got the black one) before I installed them I read the reviews.and quite a few ppl had problems with the pegs getting stuck in lower position. I checked the altrider pegs and saw that altrider have an extra stainless steel plate were the ball bearing will ride.Those peg don't have that but if needed wouldn't be to hard to make.I sprayed lubricant pushing down on the ball bearing to make sure it stays lubricated.Also on the brackets the holes where the ball bearing will sit have very sharp edges. Which may contribute to the peg been stuck. I slightly round up the edges. We'll see how it works as I'm planning an iron butt in a few weeks.
KT
Reviewed in the United States on June 22, 2023
Update, these rotate on the bar, I am afraid to tighten them anymore for fear they will break. Also unless these are perfectly level, your feet will slide off. They are very smooth under foot. I habent used them at all for this reason, pending removal from the bike. Original review ->I'd say these are great little fold away highway pegs on a budget. Nothing fancy. Based on a very well thought out design for "universal fit". Came with spare bolts, but oddly enough they don't actually match any of the other hardware. Shipping times are wayyyy off from what Amazon says but the seller did refund a portion to align with Amazon policy. If you can wait weeks for delivery to the U.S.A then go for it. Only wish it had nylon washers on parts to fill in the slop on metal to metal contact of moving pieces.
Mitmaz
Reviewed in the United States on May 29, 2023
I installed R-Gaza engine guards on my 2018 Yamaha FRJ-1300 back in 2020 when I acquired the bike. Honestly, it was the only product available at the time due to COVID. The R-Gaza bars look good and serve to the purpose but I soon discovered it was extremely difficult to find highway pegs that fit the engine guard because the bars are 27mm in diameter, (think 1.06 inches). All the products I had found up to now were for bars produced in inch sizes and just did not tighten up or fit well on these 27mm bars. The champs with these pegs are advertised to fit various metric sizes using shims installed in the clamp to accommodate the different sizes. I was able to tighten these clamps down using the appropriate shims to prevent any movement and they look great.
Nalon1
Reviewed in the United States on October 17, 2023
Installed these on my 2013 K1600 on the Illium bars I have.So far they are working well, no issues with folding up that others have had, but i did lubricate them with lithium grease before installing, not sure if that is why or not.Wish they were exact size, but the included spacers work and seems to be pretty sturdy.I have had them on for almost 2 months and have noticed a little rust under one of the bar bolts. May need to look into getting some stainless bolts, which I thought these were.
T
Reviewed in the United States on October 16, 2023
Another reviewer mentioned that these will not fold up after being used briefly. That is accurate. There is a steel bearing seated in an aluminum notch and after a few motions of the peg, the steel bearing galls and the assembly no longer folds.Additionally the mounting plate is quite secure, with locknuts on it, however the foot peg itself rattles off after some riding.Also there were no instructions included with the product.
Hope
Reviewed in Canada on April 25, 2023
Je suis très satisfait , il sont très stable et solide. Une fois posés ils ne bouge pas. Un produit bien fait. La qualité est la rien de moins. Un bon choix d’adaptateurs de fixation qui agrippe très fermement pour maintenir le point d'attache parfaitement stable à sa position ( j'ai la chaîne proche , je suis pas inquiet)Les matériaux utilisés pour la fabrication ont été très bien pensé. J'ai trouvé les informations de la vidéo très utile, c'est mieux qu'un simple mode d'emploi. La livraison a été plus rapide que prévue . Je recommande fortement ce produit et le vendeur qui nous offre sens doute le meilleur. Ça vaut le prix :) Merci !
Harry
Reviewed in Canada on November 19, 2022
Gives the ability to relax your legs on road trips. Folds up into my crash bars when I’m off road. Nothing fancy but so functional. Kick it with your boot to flip them down or back up without stopping your ride.
Recommended Products