Your cart is empty.
Your cart is empty.Product Description
It is a DC motor driver module 30A 12V 24V 300W 0-60s automatic delay forward reverse controller. It has 3 features: forward and reverse control,
work status self-locking function, and low level trigger signal input.
The function of the DC motor driver module
1.K1 is the forward start button, K2 is the reverse start button; SW1 is the forward limit switch and SW2 is the reverse limit switch;
2.Press K1, the motor starts forward transmission immediately, and stops after SW1 is closed;
3.Press K2 and the motor will start back transmission immediately until SW2 is closed and stopped.
The parameters of the DC motor driver module
1.Work voltage:DC 12V-24V
2.Module energy consumption: 0.6W(No load motor included), Quiescent 0.1W
3.Signal input: The low level is active, and the input is the negative terminal of the photocoupler. Anything below 2v is considered a signal
4.Response speed: K1 K2 is 20ms, SW1 SW2 is 50ms
5.Work Temperature: -25℃~85℃
6.Work Humidity: 5%~95%RH
Stefan Haberl
Reviewed in Germany on January 12, 2025
Läuft einwandfrei und es passt alles.
Murray deobald
Reviewed in Canada on September 26, 2024
This worked perfect i used to rebuild a old garage door opener for a 5 foot doorThe unit is for dc control and i used a electronic relay polarity controlled with diodes for forward reverse the relay controls the ac motor.
Cliente
Reviewed in Italy on October 27, 2024
prodotto restituito perche arrivato con delle saldature non conforme
Recommended Products