Your cart is empty.
Your cart is empty.Product Description
Product Description
Spider brass nozzles have accelerated Printing Performance
Engineered For Speed, And Support Up To 600mm/S Printing Speed, These Nozzles Boast Exceptional Thermal Conductivity, Enabling Faster Print Times While Maintaining High-Quality Output
Quality Material :high quality brass
Precise Design
Nozzle is made of high quality brass with excellent thermal conductivity. Higher hardness and more wear-resistant than ordinary nozzles. It is easy to print high temperature consumables, and more materials can be printed at will, compatible filament: 1.75mm PLA, ABS, PETG, TPE, TPU, PC, etc.
each Side Of The 3d Printer Nozzle Is Cut By A Diamond Knife, So Its Contact Surface Is Flatter. The Extruder Nozzle Can Effectively Prevent The Print Head From Leaking And Produce A Smooth, Bright And Consistent Printing Effect
Cutting Chamfer
Chamfering cuts are rounded to reduce the resistance of the corners on the consumables, avoiding the wire out of the smooth and plugging
Round chamfer cutting
Reduce resistance
Smooth silk production
The inner wall of nozzle is smooth, realizing smooth feeding and 0 clogging. The orifice is precise and burr-free, not easy to be clogged, and can be seamlessly connected with the machine without leakage.
Smooth inner Wall
The inner wall is smooth and burr-free, and the viscosity coefficientis small, allowing for smoother silk production
The Spider Brass Nozzle is Suitable for 3d Printer Models Such As Ender-3 V3 Se, Ender 5, Ender 5 S1, Ender 7
Compatible 3d printers
ender 3 v3 se
Compatible 3d printers
Ender 5 S1
Compatible 3d printers
Ender 7
Robert Jackson
Reviewed in the United States on August 13, 2024
These work well especially when paired with a nickel plated hotend. While you can use these for most non abrasive filaments, these are mostly good for printing filaments that require higher temps like PP, Nylon, PC etc. those can't use regular brass nozzles and need these higher temperature nozzles.You should probably stick to normal nozzles if you are just printing PLA, PETG, ABS and lower temp filaments. These are really good quality nozzles and you could use them, they just cost more. These nozzles do hold their temps better than brass nozzles so if you want that and you print regular PLA then by all means go for it, these will print beautifully. If you have the money, then I'd buy these over regular brass.
Joe Z
Reviewed in the United States on June 10, 2024
I got these nozzles to test out on an Ender 3 V3 SE, hoping to avoid over extrusion with higher temps; while they do work a bit better than non plated nozzles, I don't think the price - about 10 times higher than regular ones - makes it worth it for anyone who does any printing below the higher temps or with any kind of abrasive filament.They're as well made as advertised, with no burrs and the chamfered entrance... But so are all but the cheapest mass produced nozzles around. Temps stay consistent with the couple prints I tested, but again, this is normally the case outside of the initial layers. It does reach temp a bit quicker, though the difference isn't that much, especially with an enclosure.I can see these possibly being optimal for someone running a print farm that may be able to cut down on nozzle changes using non abrasive filaments and printing the same product non stop, but the price makes them far less worth it for anything else - even factoring in the time and replacement costs of regular non plated packs of 50 or so nozzles for the same price.
Bart
Reviewed in the United States on May 20, 2024
I like using .6mm nozzles on larger prints that don't have fine detail to increase print speed. Allegedly they also will increase the strength of prints due to the larger extrusion width but I haven't tested that personally.But these fit the printer fine, and seem to work just fine on what I print.
Dave W.
Reviewed in the United States on April 22, 2024
The media could not be loaded.
Recommended Products
$49.99
$ 23 .99 $23.99