Your cart is empty.
Your cart is empty.Product Description
DMOR
Reviewed in the United States on September 7, 2024
Great little cutters, nice and sharp, compact.You can’t go wrong.
JohnCa L.
Reviewed in Canada on March 24, 2024
They cut okay but I feel slack when the two blades come together. I doubt they'll work for long. I decided to go for the VCELINK one beside it. More expensive since you only get two for about the same price as 5 of these but the quality is better. The VCELINK on the side feels sturdier and has a more solid hinge holding the two blades. It also has a safety cap; nice for storage. Neither can cut steel wire but both cut my nylon guitar strings fine. These are small enough that I can keep one in each guitar case.
Jeremy Cotter
Reviewed in the United States on March 21, 2024
These are what they are, cheap flush cutters you buy in bulk because they’re cheap and because you don’t want to use your good ones on a lot of things here and there. Last time I bought this, they sent each pair with a slip-on plastic cap that protects the jaws and keeps the cutters in a closed position so that they take up less room to store and don’t get tangled up in other tools. This time however, they didn’t send the caps and I think that kinda sucks. However, they’re still worth the price paid.
Thomas M.
Reviewed in the United States on April 16, 2024
Nice to have few of these handy.Great for wiring & 3D printing.
Tom G
Reviewed in the United States on June 7, 2023
I do fine jewelry work with them and they seem to work just fine. If you treat them as they are meant to be used, and not as large item/wire cutters, you should be fine. They are certainly not top of the line, but they are great at this price point.
Danzee
Reviewed in the United States on March 20, 2023
I had a single one of these cutters on for several years. It was great on stranded and fine wire. It eventually lost it's edge in some spots and cut small wire less cleanly. I like how it worked well for such a long time that I bought this 5-pack. Now I again have a cutter that works on fine wire and strands and some spares for when it gets dull. The old cutter is still in use, but for larger diameter solid wire. I work on a lot of electronics.
gunmahoro
Reviewed in the United States on July 10, 2022
I really thought that these would be junk, but surprise! They are razor sharp. In fact, they are so sharp that I use them as nail clippers. They do a much batter job than traditional nail clippers, especially for toenails. They cut cleanly through thick nails without any cracking of the nail and easily maneuver around the curve of the nail. I use the others for my modeling, they cut through sprue like butter, very clean without any breaking of plastic. Comfortable in the hand. They are great for cleaning up 3D printed parts as well. Will most certainly purchase again when I need more or retire dulled cutters.
@theDavidLeach
Reviewed in the United States on April 27, 2022
I purchased this pack of flush cutters/snippers to replace a broken stock Creality snippers that I use for cleaning up 3d prints.I chose these because it was a bulk pack and the value was excellent.They arrived quickly and in safe packaging (see photo).These flush snippers are SHARP, which is desired. They are more durable that the stock flush snippers that come with Creality printers. I have been using one for months and have not had any issues with effectiveness or quality.Based upon the excellent value and cutting performance, I would definitely recommend these to others.
Glaucon
Reviewed in the United States on May 18, 2021
The KAHIOE flush cutters get the job done, it's that simple. For the work that I do flush cutters are a necessary tool, but not something I necessarily use every day. When I do use them, I'm usually cutting electrical wires or zip ties. For jobs like this, one pair of these could last for years if you use them as you should.However, occasionally the right tool won't fit, but these will. They aren't made to cut steel wire, but if it's the right size, I've managed to get them to do it once or twice. The jaws were indented a little after that, but for the price, you get your money's worth pretty quickly.If you're a mechanic like me, a set of 5 of these cutters could easily last you a few years. However, if you work with electronics and electronic components (LEDs, resistors, transistors, etc) one pair of these might be all you'll ever need.You could definitely spend more money on flush cutters, but for the price you can't beat these!
Terry
Reviewed in Canada on June 12, 2018
They are a little poorer quality than a set of Klein's but the price is great and they do work OK.
Recommended Products