Your cart is empty.
Your cart is empty.Product Description
Choose the appropriate connector
Learn More About 6-pin 12mm LED Strip Connectors
DIY Strip to Wire Quick Connection Updated version of LED strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.
Q:Do these connectors work with 24V system?
A: It would be ok for the connector to work with 24V system.
Q: Which type of light strip is suitable for?
A: 12mm width RGBWW strip lights with 6 Soldering Pads. both non-waterproof and IP65 waterproof light strips
Q: How should I connect the light strip?
A: You can pierce the strip light from the back or the front. For IP20 RGBWW strip, it is recommended to pierce from the front of the light strip, and for IP65 waterproof strip, it is recommended to pierce from the back, without removing the silicone on the surface of the light.
Q: If I accidentally cover the connector, how can I open it?
A: You can pry it open with a suitable screwdriver.
Unique design, easy installation
Upgraded strip to wire connetor
High-quality copper parts and solid materials ensure that the pin needle can effectively pierce the wire and the light strip. Compared with other connectors, the performance is greatly improved.
Suitable for IP65 and IP20 strips
These 6pin led light connectors are suitable for 12mm rgbww LED strip lights, can also be applied to both IP20 non-waterproof and IP65 waterproof light strips.
Reusable/ extension
The unqiue design is convenient for inspection or reinstallation, just use a suitable screwdriver to pry it open, and can be reused and expanded.
How to use the 12mm rgbww connector
1. Insert wires into the guide slot
and then press cap down
2. Align the Soldering Pads of the light strip surface with the pins on the connector. just please align the positive and negative poles of the light strip
3. For IP65 waterproof strip, it is recommended to pierce from the back, without removing the silicone on the surface of the light.
4. Close the cap. Wire to led strip connection complete.
More application
Myles
Reviewed in the United States on August 19, 2024
Really easy to use ,it has a strong connection and fits snug,its well worth it for connecting leds
Kindle Customer
Reviewed in the United States on July 21, 2024
Works well with this product: https://www.amazon.com/dp/B0BBGGRGDL?ref=ppx_yo2ov_dt_b_product_details&th=1When you press fit, be warned that it is still fragile and cables may fall out if handled too rough. Also the product information claims these are one time use only, and that is blatantly false. Use a small flat-headed screwdriver to pop off the sides to remove and re-use these adapters as needed.This is for 12MM long 6 pin RGB CW WW strips.
AC
Reviewed in the United States on November 2, 2024
100% success rate using these connectors. On the LED side I did remove the silicone coating down to the copper pads and used pliers to close the connection. On the wire side I used 6 conductor wire (ASIN : B07T6LCZKJ) and just had to separate the wires a bit, line up, push in, and again use pliers to close the connector.https://www.amazon.com/gp/product/B07T6LCZKJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1The only issue I had with these connectors is some of them were already snapped closed when they arrived requiring a thin screwdriver between the body and connector piece with quite a bit of force to reopen. None of them broke doing this and snapped back closed just fine.One other small issue, not with the connectors as such, was that the LED strip I was using came with pre soldered wire ends that did not match the wire (above) exactly as I expected. The LED strip has both cool white and warm with the pre soldered yellow wire for cool and white wire for warm, backwards from what I would expect. Using these connectors and wire (above) warm white is powered by the yellow and cool with the white wire. It is possible to cross the yellow and white with this connector or better yet cut off the factory wires and use these for all connections.
randomguy1234
Reviewed in the United States on January 4, 2024
When they work they're great but they're very finicky. I've had them installed for almost a year with BTE lights but I've had to replace a few connectors as the colors start to flicker over time.
Edi
Reviewed in Canada on January 15, 2024
Ruined one end of my led strip because the pins bend. Wouldn’t recommend
Tyler Burton
Reviewed in Canada on April 17, 2024
Worked great for fixing my 6Wire RGBW LED Strip lights!
Tian Xiang Gao
Reviewed in Canada on November 26, 2023
Breaks easily.
Chris C
Reviewed in Canada on October 30, 2023
I bought the Biantie La 6 Pin 12mm LED Strip to Wire Connectors for my multicolor LED strip lights. They've proven to be quite useful. The solderless design made the installation process hassle-free and quick. These connectors worked well with both my 12V and 24V strips and the connection has been reliable so far. My only minor issue is that they can be a bit delicate, so handle with care during installation. Overall, a great purchase for those looking to extend or adapt their LED lighting without soldering. Four stars!
Mohammad
Reviewed in Canada on April 9, 2023
I’ve tried many connectors but this one really works and it’s solid
Sarai
Reviewed in the United States on May 7, 2022
I was a little hesitant to get these because of some of the negative reviews. But, these connectors are super simple and easy to use if you have the right strip (12mm, 6 pin). One end of the connector has pins that insert into the contacts on an LED strip when closed, the other side has guide holes to insert LED wires. This cannot connect strip-to-strip or wire-to-wire.The LED strips I got had wires soldered onto the ends already. This actually prevented me from using the connectors at first, but I simply had to trim the strips at the closest cut point and I could then attach the strip to the connector, and then the wires from another strip to the other side of the connector. Worked perfectly to join three strips together!
FilmTravelerMatt
Reviewed in the United States on March 16, 2022
I tried the other type of strip-to-wire connector, the kind that's black on one side and clear on the other, and they didn't work reliably. They just push the wires down haphazardly and miss the contacts sometimes. I finally found these clear ones and they work beautifully because they have guide holes for the individual wires to slide into before crimping down.Warning that they do not work perfectly the first time every time; you do have to test them and check carefully that you get firm pressure and line up the copper contacts on the strip side. But after a little trial and error they work splendidly; don't give up!
Joey
Reviewed in the United States on November 9, 2022
Not sure if its coincidence, but two of my light strips stopped working after using these. I didn’t try to connect on a third to know for sure, can’t afford it.
Brendan
Reviewed in the United States on January 12, 2022
These work great and have been in place for months. I built my own under cabinet lighting and used these to connect the wires with the led strips.My only recommendation is to use a pair of pliers to firmly close the clips for both the wires and the strips. You should hear a faint/soft click. The plastic is very strong, so as long as you clamp it evenly I don't think you will have a problem. I did not break a single clip.Overall, this made installation much easier than having to solder over a brand new countertop.
Recommended Products