Your cart is empty.
Your cart is empty.Product Description
Turbo diamond blade
Granite blade turbo diamond blade for granite marble concrete brick and all similar construction materials
- Blade Diameter: 4.5 Inch / 5 Inch / 6 Inch / 7 Inch / 8 Inch
- Blade Aperture: 7/8 Inch-5/8 Inch
- Scope of Application: Specially used for cutting granite,marble concrete, artificial stone, paving flag and kerb.
- Blade height: 10mm
Wet or dry cutting,better performance with water
Turbo blade
Provides high-precise cutting at a high rotational speed. It is ideal for stone and concrete.
Machine
- Suitable for angle grinder, circular saw, masonry saw and gas cut-off saw with a 7/8" or 5/8" Arbor.
- The cutting machine must have a safety shield, and the operator must wear protective clothing such as safety clothing, glasses, and masks
brett g
Reviewed in the United States on March 15, 2025
This is the best grinder blade for cutting anything. I work with quartz and this blade cut it like butter. Five lb of quartz and still in very good shape. Just remember to rest the grinder and blade. My rewiew is best on proper use. Great product!
David Franklin
Reviewed in the United States on February 7, 2025
Perfect cuts!
Customer
Reviewed in the United States on February 28, 2025
I used the same blade for cutting thick granite counter tops. I bought 2 blades thinking It would wear out fast. To my surprise 1 blade lasted the whole job and is still going strong.
Mike
Reviewed in the United States on December 9, 2024
This blade is OK at best. I bought it for a single quartz counter top cut, shaving off only 1/4" width on a 3/4" thick slab.I taped the ends, cut from the bottom and started with an 1/8" deep score to avoid checking or fracturing along edge.So the blade cut ok just extremely slow. 22" long cut took me 5 minutes literally. The problem is that at the extreme slow speed of cut my saw had time to wobble just ever so slightly and left some imperfect edges as the rate of cute was unable to keep constant.Having cut quartz before with a professional saw you can make an even straight and level cut rather easy. With this low quality blade however you need to push at different strengths while the blade struggles to make the most rudimentary cut. My end result is fine since i will be side splashing but had I known i would have just carved into the sheetrock and called it a day. I can go a whole weekend tiling a bathroom and never make a single error so this blade is a bit trickier.So long story short, blade is dull and slow and struggles on basic composites.
Gregor Pits
Reviewed in the United States on December 8, 2024
Installing 12x24 porcelain tiles in bathroom. Nice cuts.
Ccjr76
Reviewed in the United States on November 15, 2024
Used dry to cut inch thick granite for my outdoor kitchen setup. Piece of cake!
Sam J
Reviewed in the United States on November 11, 2024
Used this cutting a cultured marble vanity top. Flipped the vanity upside down, used masking tape and took my time... No chipping on either cut side. Would recommend this blade. Used the blade in my DeWalt 6.5 inch 20v circular saw. Awesome blade.
Peter G.
Reviewed in the United States on October 18, 2024
I made multiple through cuts with this blade on a granite countertop and I ran it dry. Excellent performance.
Terranova designs
Reviewed in Mexico on February 14, 2023
Muy buen producto, supero mis expectativas.Excelente precio.
Recommended Products