Your cart is empty.
Your cart is empty. Installation of model X35-A truck rack requires drilling on the bed rail.
It features the extendable top cross-bar which can be adjusted for different size bed width. The adjustable range covers inner bed width from min. 51"" to max. 71"". The height is 30.5"" to the clearance and 28"" to the cross bar. The upright mounting plate is a flat L-shaped plate with five (5) drilling holes.Please pick two (2) that fits your bed rail.
A total of 8 bolts, nuts and washers will be included with the hardware package.
This product will not fit if you have the following with your vehicle:
1.Tool boxes, bed covers & camper shells;
2.Inner track systems pre-installed on the inner bed-wall;
3.inner bed width smaller than 51"".It also has Model X34(ASIN:B077GPLTFX) to choose,which compatible with small pick-up Truck-bed Width ranged from Min. 38"" - Max. 51"".
Always consult us for non-drilling options & compatibility issues. This products is weight-tested as shown in the listing pictures,and from feedback you should know the quality we provide.
jose gonzalez
Reviewed in the United States on November 17, 2022
Easy installation. Accurate measurements.
Soup
Reviewed in the United States on June 12, 2021
Had no bolts had to go to hardware store and pick up bolts to a fix to my truck
dhepburn
Reviewed in the United States on March 7, 2019
The price was was great. The product is well built and went together in minutes. Will be perfect for my needs on my Tacoma. If it fails I will update my review.
Mandi
Reviewed in the United States on April 20, 2019
Pro:It was easy to put together.It was easy to install.To be honest I am surprised about the sturdiness. I am NOT a contractor and do not intend to use this for supporting building materials on a daily basis. I needed a place to add some LED Lights and Amateur Radio Antennas. It is probably overkill for what I am using it for, but the price was right.Con'sI thought that the enclosed hardware was under-rated for the purpose of the intend use. I Went to the hardware store and picked up larger stainless hardware to bolt this to my truck.After a couple of weeks there is rust showing up at the base inside the crevices around the welds.
C L
Reviewed in the United States on August 22, 2017
Comes loose very easily. My husband lost the top part from the back rail while he was driving down the road. He has taken the entire back rack off as the bolts kept coming loose while driving.
Shaphan Hawks
Reviewed in the United States on July 10, 2017
What can I say. It works as advertised, just beware with any "universal" fit product accept the fact some reworking of the product and or modifications may be required. For my 2004 F150 I had to drill the mounting holes in at a sharp angle not perfectly perpendicular, and of the 3 preset drilling holes I could probably lump use two due to conflicts with the the frame. Fortunately I am not using the mount for anything seriously heavy and using just 2 out of the 3 mounting holes will be just fine. Recommended and this was the only single bar unit I could find on Amazon.
Anthony
Reviewed in the United States on April 4, 2017
The base is rather wide for the lip on my 1991 Toyota pickup. But once fully assembled, it's sturdy as can be. You will need to supply your own larger Allen wrench and, if memory serves, 13mm socket on a 3/8" or 1/2" setup. I'd also recommend some sealant for where the center bar goes into the uprights.Easy to remove the entire center section with only loosening 2 bolts if you need to load tall items in your truck.
Jim
Reviewed in the United States on August 4, 2016
Excellent product! Couldn't be more happy. I get compliments on them all the time since they match my black truck. I highly recommend them for their rugged build, easy installation (about 10 minutes with a drill) and good looks. People are asking me where I got them and they can't believe the price. Some people are paying upwards of 7 to 8 hundred dollars for these things!!
Recommended Products
