Your cart is empty.
Your cart is empty.Arlington 8141F-10 Siding Mounting Block, provides for a smooth, vertical mounting of light fixtures. You may find the siding mounting block is very easy to install, whether you have siding up or not. For a more complete job, you may also paint the fixture to finish with your desired colors. The siding mounting block is made in the USA, as well as being UL listed. with the Arlington Siding Mounting Block you will receive 10 pieces, to ensure you have enough supplies to complete your projects.
Clyde William Creason
Reviewed in the United States on March 16, 2025
I only installed on side and it has worked well the past 6 months.
Rhonda
Reviewed in Canada on August 9, 2023
I ordered despite there was no mention of a grounding lug and none was shown in photo. The one I got has a grounding lug.
M. Hsieh
Reviewed in the United States on July 7, 2023
Needed this to hang a sconce against stucco wall. Caulked around it to prevent bugs and water from getting in. More than strong enough holding a large sconce light
Paul
Reviewed in Canada on December 4, 2023
Boîte de finition de qualité comme pour les contracter et arrive dans un délai très court
Rudy Delaney
Reviewed in Canada on November 20, 2023
Love that all I have to do is blast a 1/2 inch hole in a wall, send the wire through and all the joints can be made in the box, rather than cutting out a disgusting hole and trying to mount an octy inside the exterior walls of a house. Honestly not sure why this style of mounting block isn't way more prevelant.
Customer
Reviewed in Canada on January 4, 2023
Not same as picture. No UL or Arlington name. As an electrical contractor I need the certification stamp to install - so I’ll have to return this item that is NOT as pictured or described.
Brandon G
Reviewed in the United States on October 22, 2022
I wanted to mount a Eufy security camera on my 1” wood siding. This mounting block feels exceptionally sturdy, had mounting holes in the four corners as well as within the receptacle for more reinforcement. I used #6 1” pan head stainless steel screws to mount. Will buy again for similar projects.
Andre Dohlen
Reviewed in the United States on May 10, 2021
This does exactly what it needs to do and is a great size. I used it as "old" work since I needed something t mount flat against a shed, so I did not mount it first and then added siding. Works just as well!!! The one thing I am very disappointed in is that I received a used one with all sorts of markings on it. They were easy to remove, but I expected a new one as advertised.
Beth A Cox
Reviewed in the United States on September 2, 2020
Made my floodlight install easy as pie (prior to installing siding) much better than the options available at the "Blue and the Orange" big-box stores I checked. Highly recommend this.
Chris S
Reviewed in Canada on July 8, 2020
When replacing lights, one of the screws for mounting my lights was rusted out, and it broke off when backing it out. I decided to buy this new housing rather than buying a tool to get the screw out and/or fighting with that.The replacement was bang on to what I already had in there. Was a fairly easy replacement, aside from fighting with siding, which isn't the fault of this manufacturer.I would think that even a brand new install of this mounting block (vs. a replacement, like what I did ) would even be easy.
coil_nine
Reviewed in the United States on December 4, 2020
I prefer these 100% over standard vinyl siding mounting blocks, no question. I would never use ordinary mounting blocks, I may go back and replace the standard blocks installed by the contractor. Next job, I would spec them. Our housing inspector prefers them.The Arlington mounting blocks are electrical boxes first, designed to fit vinyl siding. With the Arlington boxes, I can exactly align the box with the Jbox, mount it rock-solid, andthere's enough space in the Arlington box for wires and twist nuts. Then the A-box has specific screw lugs to physically mount the light- solidly. And the wires are protected to code, above code. And it can take heavy lights, where the usual vinyl boxes might bow in with the weight.Standard contractor vinyl mounting blocks are 1 in deep hollow voids, and good luck running a 2" long screw from the fixture into the junction box. On those cheap mounting blocks, I simply ran 2 1/2 inch wood screws at an angle and hoped I missed the Jbox and hit wood, then stuffed the wires into the unprotected void.I think the white color is acceptable against any color vinyl, bur if you want to match, it is easier to paint Arlington boxes than deal with standard vinyl light boxes.I also chose Arlington recessed exterior outlet boxes over what the contractor offered. It was a good decision.
Chris P
Reviewed in the United States on October 15, 2017
I absolutely love these things! They make for a nice clean install and is surface mounted so you don't need to cut in a box. I bought one for a remodel and ended up buying more to replace old crappy light installs - well worth the money.
Texas Popo
Reviewed in the United States on April 27, 2013
This was supposed to be new in a manufacturer package. I had previously ordered the 8141-1 and liked it so much I ordered another as well as this one. The two were shipped in the same box. This had no manufacturer package, no hardware (ie, mounting screws) and had caulk and cracks on it. I had ordered a new one and expected a new one. I have sent it back and requested a replacement. This is totally unacceptable and I have never received something used from Amazon before.
Recommended Products
$26.15
$ 11 .99 $11.99
$94.95
$ 41 .99 $41.99