Your cart is empty.
Your cart is empty. It is a bypass module to bypass the chip key only, please note this one is not a remote starter!!! Security design for chip key immobilizer, ONLY compatible with most cars with CHIP KEY, will not work for other immobilizers.
How to install the bypass module?(Please note a spare key is required to go inside the Box, if your original key is too big, please open it to get the chip unit )
Some cars have RFID car key (chip key), if you want to remote start car, you need to have a bypass module, otherwise the car engine can’t started.
Main Steps:
1) Remove the key screws of bypass module control box, open the control box;
2) Insert the OEM car key or key PCB or Key chip under the wire;
3) Lock the locker and press the wires close to the remote key, or key PCB or Key chip;
4) Tighten the screws and lock the case;
5) Circles the sensing the wire on the OEM car key socket(circle more circles can enhance the signal;
6) Fasten the sensing wires to the car key socket with glue;
7) Try to start car engine to confirm the bypass module working, if it is not working, please try circle sensing wire more circles on the car key socket, or check the connection if it is right;
8) Place the bypass module in a hidden place.
Reynier
Reviewed in the United Arab Emirates on February 25, 2025
Thanks seller😎
The dude
Reviewed in the United States on November 22, 2024
Can buy cheap keys now!
Lee Higgins
Reviewed in the United States on July 31, 2023
Have not hooked the unit up yet. Looks very simple
Customer
Reviewed in the United States on March 31, 2023
I was a little skeptical at first however I can say for a fact that it does work on Subarus that require a chip in the key when placing your key in the device be sure to pre-shape the wiring connector ribbon and be very careful not to damage it because you can actually break the solder joint not a big deal if you're careful well worth the money
Marco P.
Reviewed in Mexico on March 16, 2023
No me sirvio porque no detecto la llave para que prendiera sin tener que agregar un dball
Travis Peters
Reviewed in Canada on October 1, 2023
I was kind of skeptical, but it worked exactly as advertised. Simple to setup and install.
Dudermcgavin
Reviewed in the United States on January 26, 2023
Works awesome, just a note : you can't turn the ignition with a blank key if it has a chip in it. It will interfere with the key chip that is in the box, and will not let the car start. I had to cut the chip out of the new key in order for it to work. Once I realized that, it worked flawlessly.
Wade
Reviewed in Canada on October 18, 2022
Just as advertised works awesome!
Alexander Keopraseuth
Reviewed in the United States on May 28, 2020
Super easy to install but it didn't work for me, I need an actual DEI 556UW, if you have an e46, don't waste your time here.
TyJuan Jones
Reviewed in the United States on October 15, 2020
Great product and does its job Everything. Very easy and straight forward to install. If you want to be able to buy regular keys for your car without the expensive transponder this is the product for you. If you are like me and installed a push to start system but don’t want to have the key in the ignition cylinder to work this is for you. But if you do not already have a key with transponder in it this will do nothing at all for you
Savvy1777
Reviewed in the United States on April 21, 2019
Easy to install and allows you to use a normal sized cut key rather than the HUGE key fob.Just insert the key or keyguts into the box, run red wire to +12V constant, the black through a hidden momentary switch... then to ground.Insert cut key into ignition, press momentary switch, start the vehicle and off you go.Without knowledge of the hidden momentary switch the vehicle won't start which would frustrate a potential carjacker.Yeah, here are the keys... good luck as you get to safety.
Zac S
Reviewed in the United States on December 20, 2018
Solid performer that is easy to wire into the system. The major flaw is its size. You have to have a plan for where you will hide it, as it is almost half the size of a remote start alarm.TECH TIP: remove the chip from the key and out only the chip in the unit, that way if a thief finds it, they still don't have a key.
Recommended Products
