Your cart is empty.
Your cart is empty.Product Description
Our fasteners work with many brands of pneumatic tools like Bostitch, DeWALT, Senco, Paslode, Duo-Fast, Hitachi, Makita, Porter Cable and more. If your tool model number is listed below and our fastener fits within the size range of your tool, our fastener will work. We use only high quality collation materials and glues to keep the fasteners together before and during use. Use B&C Eagle fasteners for more positive drives, fewer jams and lasting quality. Please make sure you select the right coating for your application. Bright fasteners should only be used for interior applications in non-treated lumber. Hot Dip Galvanized fasteners are for interior or exterior applications in treated lumber. For the best corrosion protection available, always use Stainless Steel fasteners. Visit our website at www.bandceagle.com or give us a call for more technical information or if you have any questions on our fasteners. ***As of July 1st 2013 we've updated all of our packaging. Buy with confidence that you will receive our product shipped from AMAZON.COM intact. *** These fasteners are ENGINEERED TO FIT: Accuset: A100LS, A150LS, B&C Eagle: NS1840-II, BEA: 90/25-552, 90/32-611, 90/38-150, 90/40-621, BLACK & DECKER: FSNS125, Bosch: STN150-18, Bostitch: SFS100K, Campbell Hausfeld: CHG00100AV, CHN10399, CHN10499AV, NB006499, SB3232MVRB, SN258K, SN258KMVRB, DeWALT: D51420K, D51422K, Duo-Fast: DNS-1840, KB-1836, SURE SHOT 1820, SURE SHOT 1832, SURE SHOT 1848, SURESHOT 1848F, SURESHOT 1848SL, Fasco: F20P 90-25, F20T 90-30 CT, F20T 90-40 CT, F21P 90-25A, F21T 90-40A, F25A-90/40, F3C 90-40 CT 1, Hitachi: N3804AA, N3804AB, N3804AB2, N3804AB3, Makita: AT638, Porta-Nails: 610, Porter Cable: NS100A, NS100B, NS150A, NS150B, Ridgid: R150 FSA, Senco: FINISHPRO 2N1, KN4450, LN4450, SKSXP, SLS15MG, SLS18, SLS18MG, SLS20XP, SLS20XP-L, SLS25XP, SLS25XP-L, Spotnail: FS4825, HL3852, TS4825, WS4840, WEN: 61710. PLEASE CONSULT YOUR TOOL OWNER'S MANUAL FOR SIZE RANGES. For the most up to date list of tools this fastener is compatible with, please visit our website at www.bandceagle.com
From the Manufacturer
5/8 in. 18 gauge galvanized finish staples 1/4 in. crown fits the following stapler guns: Senco LN4450, SKS-L, SLS20, SLS18; Hitachi N3804A; Duo-Fast 1800; Porter Cable NS100A, NS150A, NSS150; Airy EZ-2; Accuset A150LS, A100LS.
Erie, CO
Reviewed in the United States on November 12, 2024
box came with 6 strips of staples missing, strips of staples are not 100 staples but 94 so a total of 900 staples short.
Customer
Reviewed in Canada on March 7, 2023
Worked well in my Campbell Hausfeld stapler. No misfeeds or misfires. Half the price of Home Depot. Used to install 1/4" plywood underlayment.
Coolin
Reviewed in Canada on March 29, 2022
matches ad
Liz
Reviewed in Canada on February 24, 2022
The staples were used to make cedar lattice panels.
Mini07
Reviewed in Canada on November 14, 2022
Parfait bonne grosseur
Jeff Covell
Reviewed in the United States on September 23, 2021
awsome product at a low price
LarsNorth46x77
Reviewed in Canada on September 23, 2021
NuMax S2-118G2 Nailer gun . Load well and have not jammed.I hit a wire and hte staple just bent / out of the way. ExcellentI will reOrder . 3/4 or 1/2 inch... the staples are easy to get out of the Box and Load.
RICk
Reviewed in the United States on October 20, 2020
Worked well in my gunDelivery was fast too
larams
Reviewed in the United States on July 8, 2019
WOrk as expected.
CLB
Reviewed in the United States on March 11, 2019
This is a good, well-made product that worked as expected. It is well packaged.
Colin
Reviewed in the United States on October 20, 2019
Use these for framing/stretching canvas art. Hand stapler could not drive staples deep enough. 70psi would cause staples to rip canvas. 60psi would sink them perfectly. Used the whole box without any problems! Thank you!
ICTV
Reviewed in the United States on December 27, 2012
Apparently 1/4" 18 gauge crown staples only 5/8" long are somewhat rare in the world of bargains. These are made in China and appear high quality, with all stacks intact, and the box is pristine (like the one you'd select at the store), I am glad I found these, since local home improvement stores let me down. I paid less locally for the super-bargain (branded Central Pneumatic) air nailer-stapler than the delivered price of these 5,000 staples, but that store didn't have 5/8" staples, even though their stapler shows 5/8" as the shortest it uses. I test drove a few staples into a soft stud: no issues. I rated 4-of-5 to show I could be a little more pleased with a lower price.
Robert Pritchard
Reviewed in the United States on December 27, 2011
these are better than the hachi brand i bought and better excelent price i have used other b&c nail product's and they are as good with their staple's also
Recommended Products
$122.56
$ 57 .99 $57.99
$29.18
$ 12 .99 $12.99