Your cart is empty.
Your cart is empty.Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Del
Reviewed in the United States on October 20, 2024
Had to reuse my old boot.this boot is to small in diameter for a 1994 del sol sigear/tie rod bellows...
Andrey Kolpakov
Reviewed in the United States on May 2, 2023
Good product but does not fit as it claims to. I tried to install this on the driver side of my 1999 Honda Civic CX hatch with power steering. Similar to another reviewer, I couldn't install it because the diameter of the boot was too small. Accidentally poked a hole in it while trying to install, bought the other kit - 103-2865 - for both sides and they fit perfectly. OEM boots are $20 so I'll do that next time.
Charles
Reviewed in Canada on November 25, 2023
Fits, good quality rubber. Comes with metal straps but I just used regular zip ties. Gave 4 stars as it seems bit pricey for what you get - essentially a rubber boot. Although the boot rubber seems higher quality but only time and distance will tell.To install, and to avoid endlessly struggling with fitment over rack and pinion housing / steering rack:- Install the boot per normal, zip tie the small hole first- then steer to compress rubber against housing, then work the larger hole rubber edge slowly against the steering rack- 2 person is best but I did it by myself.- it worked perfectly with the steering wheel cranked per above because the steering compresses the boot.- just ensure the smaller hole is secured to and positioned properly on the inner tie rod- the compression also helps hold the boot as you work (and twist) the boot all way around housing. Good luck.Boot installation took about 45 mins once I figured out to compress the boot.
Whn
Reviewed in Canada on March 20, 2022
For the driver side, Heat it up, grease around inside and slide it in any spray can not too big and leave it for 1 hour then heat it up againg and quickly slide it in, super easy..very high quality materials..I put this on 1995 Honda delsol si and works fine..
Sarath Lon
Reviewed in the United States on December 12, 2022
Hard to install on my DC2
Brianna
Reviewed in Canada on April 16, 2021
Drivers side on my 1994 Del Sol too small compared to OEM. Spent over an hour of mental abuse trying to install. With failure. I'm returning to Amazon. Honda dealer has for $40 Canadian worth every oenny
Jamie Young
Reviewed in Canada on August 12, 2020
I have no idea of this does what it is suppose to do. I bought it for a replica K-9 build from Doctor who. This is part of his tail.
Dana Hornsby
Reviewed in the United States on August 10, 2020
Let me preface by saying I was a tech for some years, and am very capable of fixing literally anything on my car. I ordered the Beck Arnley rack boots individually for the same vehicle - 1995 Acura Integra GS-R.I double checked the part numbers for both sides against the year breaks for the 94-97 Integra, and 98-01 Integra as Acura (Honda) offers a totally different PS racks for those two different year spans. The difference between those racks could be unrelated like how the hard lines enter, or it could mean a different diameter of the rack body itself which would affect the fit of bellows boots.The passenger/right side boot went on without issue. Yes the inner opening needed to be stretched over the rack, but it wasn't difficult.The driver's side/left side boot? My goodness. I fought that thing to get the inner portion to STRETCH over the rack. I'm talking five different body positions, cussing, wanting to throw things, and it literally took me longer to stretch this boot over the rack housing end than it did to literally install the entire rest of the driver's side suspension I'd removed already.I've yet to steer the vehicle lock to lock because I'm doing a lot of other overhauling, but the driver's side/left side boot seems a touch too small in diameter on the inner where it stretches over thr rack housing end. The overall length appears to be too short by a touch too, but I've yet to steer lock to lock to check it at full stretch. The indention for the inner boot band isn't relaxed like the other boot - it looks distended as if it's not sitting correctly in the groove on the rack, but it simply won't because it's stretched much more than I think it needs to be.Also on the driver's/left side boot the vent nipple seems to be further away. It's pulling on the boot when connected. I could get a longer vent hose, but that's not the point. Vent nipple for the other boot was a perfect match/fit.The OEM boot for my driver's/left side was torn into bits (I needed to quickly remove the inner tie rod to compare it to ones that just arrived, so I'd know if I needed to send the tie rods back, or keep them) so I cannot compare the dimensions for the Beck Arnley driver's side/left side boot, and OEM. The passenger's side/right side is 100% identical dimensions wise to the OEM boot I removed fully intact.If anyone has any suggestions I'd love to hear them. I have not torqued everything down completely, so I can easily remove the outer tie rod to swap a different boot onto that driver's/left side.Thanks for reading!
JimInRaleigh
Reviewed in the United States on December 10, 2016
Extremely durable; the material is rubber, but super strong.Difficult to put on(usually are) but these will last.Beck Arnley make superior products in my experience.
T. Craven
Reviewed in the United States on April 5, 2016
Useless garbage. It appears to be decently made, but doesn't even come close to fitting. I checked the manufacturer website and it says this fits, as does amazon, but it is no where near close enough to fit. I even held it up to the old one to double check and sure enough, it is not the same size, not even close. Repair took longer than expected so I missed the return window...in the garbage can this junk goes.
Reno
Reviewed in the United States on October 18, 2015
With some grease on the boot these are very easy to install. Do not listen to these people about not fitting. When they are on they fit very nicely. Driver side took about 5-10 min, and the passenger took about 5min.
Yafis Rai
Reviewed in the United States on February 16, 2013
Good Price. Fits perfect in the Honda Hatch Back. Would recommend to others. Arrived on time just as advertised. Comes with Tie-Downs.
Recommended Products
