Your cart is empty.
Your cart is empty. This Kit Includes:
1 x Blow Tie Spunding Valve
1 x duotight 8mm tee piece
1 x duotight FFL to 8mm fitting
1 x 1.5"TC connector
1 x 8mm Push in 0-40psi Guage
1 x Premium Ball Lock Disconnect (MFL) Grey/Gas
2 x 8mm white straight joiner pieces
Pressure Fermentations
With pressurised fermentation becoming ever more popular it has become increasingly important to have a method of
regulating and controlling this residual pressure from the fermentation process. The BlowTie has been
designed specifically for this reason.
Instructions:
Use the yellow adjustment knob to control the pressure coming out of the pressure vessel. Clockwise is higher pressure and anticlockwise is lower pressure.
We would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi.
jeffreybar
Reviewed in the United States on February 7, 2025
Out of the box, my spunding valve was unable to manage anything below about 15 psi, and took a lot of jiggling to even vent at that pressure. Attempting to set the valve to spund at a more reasonable 8-10 psi (as tested on a keg of carbonated beer of known pressure) was impossible...it was just far too loose. I have "fixed" the valve by elongating the spring...pretty much the only way to go about it. Used some pliers and some other pliers and pulled to get another 1/8" or so, giving it enough travel to actually engage and disengage the diaphragm at usable pressures.Would highly recommend looking for a better quality spunding valve if you're in the market, but if yours has the same problem that mine did, that's how you fix it.
The Doode
Reviewed in the United States on November 19, 2024
zero issues so far
pablo
Reviewed in the United States on August 16, 2023
Bough it as a replacement or another all metal parts unit I purchased on amazon via another vendor. the other unit did not hold pressure, this one has been solid since day one. will be buying another one soon. Using these to pressure ferment and for keg transfers.
Bryan Carnicom
Reviewed in the United States on November 27, 2023
I have used this on pressure fermenting lagers and NEIPAs with kveik. Easy to assemble and set up. It is a must have for a homebrewer.
Customer
Reviewed in the United States on November 26, 2023
Works as advertised. Can now use a carboy as a secondary fermenter.
Richard
Reviewed in the United States on October 4, 2022
First time using it, and when I came back to look at it, the gauge wouldn’t go back down. Very disappointed in this product. Even one of the duotights are impossible to take off. Tubing gets stuck and made.
DH
Reviewed in the United States on April 26, 2022
*5/10/22 UPDATE* listing has been recently updated and no longer mentions tri clamp flare or shows it in picsQuick review… appears to be authentic Kegland Blowtie and I purchased it specifically for controlling pressure in keg during closed, pressurized transfer of carbonated beer from bright tank to keg. Worked perfectly.AS OTHERS HAVE STATED,: the tri-clamp adapter in the pictures and description was NOT included.Disappointed in this.
D. Janson
Reviewed in the United States on April 1, 2022
Would be a 5 if it was made with less plastic, but given the price it is reasonable. It is a bit tricky to be sure the parts are assembled correctly, in particular inserting the clear plastic tubes into the other parts. Not inserted far enough? Could leak. Inserted too far? Could block some openings, especially around the gauge. Also, the fittings on the red valve part need extra attention to see that they are pushed in tightly, or some leaking could occur.In short, a reasonably priced item that seems to work fine as long as you pay lots of attention to assembly.
Recommended Products
