Your cart is empty.
Your cart is empty.Product Description
Jig Saw Blade, Material Diamond Grit, Primary Saw Application Masonry, Shank Type T, Teeth per Inch 30, Length 3-1/4 In., Application Grade (5) Porcelain, Granite, Marble, Slate, Glass and Cement Board 3/64 to 1/2 In. BOSCH is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, Bosch sells the right saw blade designed for high performance in all major brand jig saws.
From the Manufacturer
Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, Bosch sells the right saw blade designed for high performance in all major brand jig saws.
hot carmel
Reviewed in the United States on February 18, 2025
They run small but still gets the job done
moviegeek
Reviewed in the United States on February 1, 2025
I used this to trim ceramic tile in a bathroom It made cuts quite nicely.
Matthew K.
Reviewed in the United States on January 27, 2025
Writhed great to clean up inside corners after cutting tile with a tile saw
Yolanda's Master
Reviewed in the United States on August 17, 2024
Well made but still has a hard time cutting ceramic tile.
John Morrison JR
Reviewed in the United States on December 11, 2024
I was using a regular jigsaw bladeFor cutting plastic :) yea I knowBUT then I got this and life because easier
Mr Lee
Reviewed in Canada on October 15, 2024
Writer used for project cutting cement board , went thru like butter .Very good & impressed .
Suzanne Klee
Reviewed in the United States on June 18, 2023
This Jig Saw Blade works perfectly on Ceramic Tile. You'll need to take it a little slow, especially on thin Tile; Otherwise the Tile could Crack if you try to rush it. I'm very pleased with it. Cut on the top side of the Tile or it will be more likely to crack. It leaves a perfectly SMOOTH cut.
Steven
Reviewed in Singapore on March 18, 2022
The speed is so slow, at around 1mm per minute, that by the time I cut 10mm of porcelain tile, my 20V 2 AH battery runs out of power.
Marco Mena
Reviewed in Mexico on July 11, 2021
La use para cortar una loseta de exterior que son más grandes y duras, y funcionó muy bien.
David
Reviewed in the United States on September 15, 2020
I've been adding a bathroom to my basement and found a fantastic 12x24 tile at the Re-Store.Great quality, porcelain, the down side of a porcelain tile is, It's Hard. Meaning you can't just cut it like a ceramic tile, you need diamond blades and bits. I started out using my Roto Zip with a diamond blade to cut out shower fixtures, and that turned out to be a chore, used a $20 diamond bit, and it took about 20 min to get the handle cut out.So when it came time to cut the toilet flange out, i went a different direction. I found this diamond jig saw blade for hard tile, perfect for my cordless jigsaw. I did a little research, you don't want to cut porcelain tile dry, all you will do is over heat the blade and dull it or even worst break it. So the trick I found was to fill a small bucket to the rim with water and place the tile on top of it so the blade goes through into the water. cut slow with moderate pressure. This blade did the job in 1/4 of the time with no effort and no dust. cut the circle out perfect!If your working with Hard Tile this is the blade for the job!
Peter J.
Reviewed in the United States on July 27, 2020
It cuts through the ceramic tiles. It struggles, it needs to be kept wet, it is slow to do so, it causes chips in the surface but it gets the job done. If all you need to do is to widen the hole just a bit to fit that pipe through the tile or make some odd shape that will have the edge covered with a trim this is the way to go. Just keep your expectations reasonable - it ain't no wet saw or even diamond blade on angle grinder. I've made a total of about 12-14 inches of cuts in pretty hard tiles so far and it still holds - keep it cool (watered) to make it last.
EVARISTO
Reviewed in Mexico on July 6, 2018
Todo muy bien llegó a tiempo y bien aún no lo uso
Keith
Reviewed in the United Kingdom on October 31, 2017
I bought the blade to do small cuts in ceramic floor tiles, I'm also using an angle grinder with a diamond blade for circles and an electric tile cutter for long straight cuts. The blade bent within 30 seconds, this could just have been bad luck but the carbide blades I also got have not bent. Delivery was fine but I wouldn't buy this.
Recommended Products
