Your cart is empty.
Your cart is empty.Product Description
The TS1007 is for use with Bosch 4000 and 4100 table saws. It works with stacked dado and rabbet cutters. It includes washer for proper position of dado components on armature blade sha Ft.
From the Manufacturer
For use Bosch 4000 table saw with stack dado and rabbet cutters.
merkie
Reviewed in Canada on July 12, 2024
This is a very well make product. Fits great works great
Garyo
Reviewed in the United States on March 28, 2024
Good and sturdy! This is a good addition to my table saw
L Record
Reviewed in the United States on November 2, 2024
Includes adjustment screws for leveling and spring latch to keep it in place.
Sharp Dressed Man
Reviewed in the United States on October 4, 2024
Works on my Bosch saw. Didn’t want to waste my time making one when I could have it delivered to my house. Worthwhile to me
William M. Bates
Reviewed in the United States on February 5, 2022
Excellent product, is cast metal and not plastic. Fits correct and is easy to install and remove. Excellent quality like all Bosch products. If you have a Bosch table saw you must have this insert. Well worth the money. Highly recommend.
I See Dead People
Reviewed in Canada on January 16, 2022
Using it with Freud Dial-A-Width Dato set and it works great. Perfect fit on my Bosch table saw.
RIB
Reviewed in the United States on January 28, 2021
Just as a zero tolerance plate adds value from the moment you install it this will provide the same benefits of reducing tear out on your dado & rabbet cuts. So very easy to install and required no fitting other than cutting the opening for the blades
Victor Hugo Sánchez Vidales
Reviewed in Mexico on July 25, 2020
Se adapta a la perfección y hace mucho más seguro trabajar con la sierra dado aún que se limita a 1/2 y el dado da hasta 19 mandé espesor
VICENTE MANUEL GARRIDO MEZA
Reviewed in Mexico on January 18, 2020
SI TIENES UNA SIERRA DE MESA BOSCH NO TE PUEDE FALTAR, EXCELENTE
Enrique
Reviewed in Mexico on December 28, 2018
Excelente producto
David Howard in DC
Reviewed in the United States on December 25, 2016
Fast shipping, got it next day! I used mine with a dial-a-dado 6", cut some beautiful box joints, first try and they were flawless. I did have to slightly file the size, but this was minor and took all of 2 minutes. As a handman, I don't consider this a negative, it is part of "work" in general. I have such a tight clearance, I prefer it being slightly smaller so I can dial it in to fit better. A+, great insert, great price, makes the Bosch saw even better!
Colorado Joe
Reviewed in the United States on January 16, 2016
I bought this for my Bosch 4100-09 Worksite 10 Inch Table Saw - To use with my Freud SD-208 8" Dado Set.Usual Bosch quality - Made of heavy gauge metal (no flex whatever) - Fits perfectly - Easy leveling with screws.It comes with a 19/32" wide opening for the Riving Knife (not pictured in Amazon's current product photo) -Which makes for easy use by lowering the RK - Instead of having to remove it.But... BEWARE! As is described - This is a "Dado Insert" - NOT a Zero Clearance Insert. It comes with a dado blade opening: 1-1/16" wide.Since the maximum dado able to be cut with the 4100-09 is 13/16" - Even when using it for a "max" size dado stack -There's a clearance on each side of the dado set of 1/8" - Ergo... Pretty useless for use as Zero Clearance Insert.For dado's thinner than that - Even worse. It works absolutely great for use in cutting tenons/rabbit/lap joints.If you want a Zero Clearance Insert - Spend more $$ - Buy Leecraft Zero Clearance Inserts - And cut your own ZC grooves in them.It also works great for use as a template to make your own ZCI's.Limited, but adequate instructions are provided - Along with a 3/32" wide metal "accessory outer dado washer"... "designed to secure a 1/2" to a maximum 13/16" dado set with the arbor nut in place".When using dado sets on the 4100-09 - The 4100-09's outer blade arbor washer is used as the inner blade washer.Then either the "accessory washer" provided - Or the 4100-09's inner blade washer (for 1/2" or less dados) - Is used between the dado set and the arbor nut.Great for the price - But limited in use a a dado insert.Note: All measurements were taken with digital calipers.
encanto
Reviewed in the United States on March 8, 2013
When you need one of these, there is no substitute. If you want to cut dados, and support the material and prevent hazards presented by that gaping hole in the table, you must have one of these. I am entirely satisfied with all the Bosch products I have purchased so far, and all through Amazon. This item is no exception. It fits perfectly, the height and level are adjustable using four set screws, one in each corner, and the finish is superb. It simply snaps in place quickly without securing screws and doesn't ever move or get in the way of material moving across the table.
Recommended Products
