Your cart is empty.
Your cart is empty.Product Description
2 Axis DRO /1pcs Slim DC10F +1pcs standard linear scale
- 2 Axis Display
- 2pcs IP55 Linear Scale
DC10F-8" & DC10-36"
DC10F-8" & DC10-40"
- All the mounting hardware you will need for installation
- Suitable Plug
- Information manual
- All of insllation Accessory .X.Y,Z mounting Plate
- DC10F-8 "（220mm travel length）DC10-40”（1020 measuring length)）
- DC10F-8 "（220mm travel length）DC10-36"(920mm travel length )
3 Axis DRO /3 pcs Linear Scale
--Hall Sensor /RPM function
- 3 Axis Display ,RPM function included
- 3pcs IP55 Linear Scale
- All the mounting hardware you will need for installation
- Suitable Plug
- Information manual
- All of insllation Accessory .X.Y,Z mounting Plate
- DC10-12" (320mm measuring length) DC10- 30" (770mm travel length) DC10-16" (420mm travel length)
- DC10-12" (320mm measuring length) DC10- 36" (920mm travel length) DC10-16" (420mm travel length)
SLIM LINEAR SCALE DC10F MODEL
IP55 Sealing Protection
- The slide carrier of the DC series linear scales uses a five bearing design.
- The optical grating linear transducer has been proven as the most reliable system design in today's market.
- The glass grating slideways are lapped, and JIS standard P5 grade bearings are used to achieve smooth and accurate movement and long working life.
--DC10F-8"
Cross Section 18 * 23mm
- In some lathe installations, the X-axis is very limited to install usual linear encoders, Cross Section 18* 23mm slim linear scale are flexible to be installed on the cross slide of the lathes,
100% Laser Calibration
- All linear scale are individually inspected and calibrated by RENISHAW laser calibrator to ensure 100% accuracy.
- Industrial Standard Output Signal Interface Only the industrial standard TTL digital signal output is available. Interface is the industry standard 9 pin DSUB9 connector.
Pad Strip for Slim Linear Scale DC10F
- The Linear Scale body is made of aluminum alloy profiles with high verticality. The reading head is made of tin alloy die-casting & high quality chip.3M stainless steel cable hoses to prevent corrosion
- DC10F linear scale, suitable for small machine tools,mainly installed on household lathes and punching machine
- Slim linear scale DC10F equipped with a closed Pad Strip cover and installation pads for easier installation and installation on equipment without installation space
- Total length =Travel length (Lo) +118mm
Standard DC10 Linear Scale
- Vertical five bearings sliding system,smooth and accurate movement
- Linear scale was inspected by RENISHAW laser interferometer
- All the mounting hardware you will need for installation
- Full sealing structure,swarf and coolant proof.
- High Precise & IP55,Excellent dust-proof , water-proof
- Total length =Travel length + 133mm
D80M -2V & D80M-3V -Display in Metric / INCH
- Voltage Range:AC80V-260V/50HZ-60HZ
- Power Dissipation:15W
- Working Temperature:-10℃~60℃
- Operating Keypad:Mechanical Keypad
- Resolution:0.1μm 0.2μm 0.5μm 1μm 2μm 2.5μm 5μm 10μm 50μm
Metal Shell D80M DRO
HIGH INTERGRATION
- Meanwell Power supply ,Omran Key button.Switch on& Switch off can meet more than 100000 times.
- Adopting innovative cover technic on windows,super clear reading.
- High integration,strong anti-interferenc brand electronic components,ensure the long service life
HIGH PERFORMANCE
- The digital readout display meter system is equipped with a variety of intelligent functions: SDM 200 sets memory, bevel processing, power-off memory, circumference drilling, oblique line drilling, 1/2 centering, also a calculator is equipped for more convenient usage.
HIGH QUALITY
- The grating digital display body is made of high-quality Aluminum alloy which has high reliability and durability, corrosion resistance, and scratch resistance.
- We provide the spare fuse on the back of the digital display.
Saving the Drawing function & Displaying the tool's current position
- 1 :Special previewing the drawing function,after setting well the parameter,the Dro will display the machined well effect which makes the operating be ,ore visual
- 2 :Displaying the tool' s current position function,during the machining,the system will display the tool' s current position according to the drawing which makes the machining be much more easier.
P. McGill
Reviewed in the United States on July 7, 2024
Finally got it mounted on my knee mill. Working well, seems accurate, display is large and easy to read. Only complaints are the instruction manual translations are sketchy, none of the mounting brackets were used as they didn’t fit anything, and the shims supplied were all the same thickness instead of an assortment. These seem to be typical of most Chinese products of this type. Overall I’m happy with the product and thank you YouTube for much help.
Recommended Products