Your cart is empty.
Your cart is empty.Product Description
Product Key Features
Why Brilliance Laser Inks?
- Shake & spray application
- Easy to apply. Easy to wash off.
- Anti-Clog Technology
- Permanent Mark
- Quick to dry
- Marks on various metals
- Up to 4,000 square inch of coverage
- Works with CO2 and Fiber Laser Nd:YAG Laser Systems
Laser marking made easy with our Aerosol Spray (in 2 oz & 12 oz)
Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces.
With just a shake and a spray, conveniently make a permanent mark on your metal substrate with our aerosol spray. It comes in two sizes: 2 oz. and 12 oz to fit your needs.
Note that this product does not include any alcohol in the package. Below application tutorial is for instructional purposes only.
How To Apply Aerosols
Step 1
Clean the substrate with denatured alcohol so it's free of any dirt and oil.
Shake the bottle well for approximately 2 minutes to make sure that all contents are mixed.
Step 2
Hold the bottle at 45ยฐ degrees and spray 6-8 inches from the substrate surface using left to right motion. Apply a thin coat as long as you do not see through the surface.
Wait for the mixture to dry completely or use a hair dryer to dry it in seconds.
Step 3
Adjust and focus your laser settings according to the material and make your mark!
You may refer to the table below on Suggested Laser Machine Settings.
Step 4
No waiting time needed to wash off! Rinse with tap water or wipe with a wet cloth.
Voila! You now have a permanent on a finished product.
McKay Hunsaker
Reviewed in the United States on June 24, 2024
I've used both the copper tone red and black laser marking spray and the color difference is insignificant. You're better off using the black spray and save yourself a few bucks. It might show up better on specific material but that wasn't the case for me.
Warren
Reviewed in the United States on November 12, 2024
I used this to laser engrave tumblers. It worked well at times but was not consistent. I use the black and have not had the same issues
Richard N.
Reviewed in Canada on January 10, 2024
The media could not be loaded.
D. White
Reviewed in the United States on March 13, 2023
I have an Xtool D1, and used my 10 watt laser head to mark these two knives in the photo. This spray is easy to apply and wipe off (almost too easy so you have to be careful when focusing your laser not to hit and remove). Iโm not exactly sure why they donโt also market this to diode laser users because it does work.If you look at the difference in the color of the text on the knives, David has a slightly darker more copper color (and yes I know itโs at a different angle in the pic that makes it look even darker). Normally you do test runs to nail down the power and speed to get the best results, but I didnโt have sacrificial knives. In this case, David was done at a slightly faster speed and resulted in a better copper tone. I wanted to mention this so if you arenโt getting the results you want, try doing a test grid on a sacrificial item to get the best settings for your laser.One other thing to note, is that mine did come with an extra nozzle if one becomes clogged. Overall I like the spray, I just donโt like how crazy expensive it is.
Jay Ramsay
Reviewed in Canada on December 31, 2023
Overall great. It works very well, and is great quality. Can be a little messy at first if you're not experienced, but once you get the hang of it, it's great. Check online for tutorials and tips. Happy with this, it's good stuff.
A Rampart
Reviewed in Canada on December 25, 2023
I've been looking forward to using this product since I ordered it and finally got around to doing it and I'm glad that I did. The spray is easy to apply and dries fairly quickly. When applied, it has a light green colour to it while wet and when dry, it turns flat white. I was able to use a hair dryer on high heat to quickly dry the spray with no problems. I have a 20 watt diode laser and engraved a couple of stainless steel travel mugs at 60mm/sec and 100% power. There is next to no odour from this spray while spraying it or while engraving it with the laser. Once the laser job was done, I removed the mugs from the enclosure and washed off the spray and I was surprised at how easy it was to clean off. A little bit of dish washing detergent and a piece of paper towel cleaned off all of the spray with no effort at all. The spray is almost like a powder when it is dry and comes off extremely easily. The final product was a copper brown kind of tone and the "engraving" looks amazing. Very crisp edges and sharp images. This spray makes it so easy to engrave stainless which is normally very challenging to mark without some kind of catalyst. Amazing product that works so well. Like the mugs say, I'm a happy camper.
V. Rabbit
Reviewed in Canada on November 12, 2023
This is regarding the 12 Oz - BLI201 - Aerosol Red (Copper Tone) Laser Ink for Metals Marking - CO2 Laser - Fiber Laser - YAG, Durable, Permanent, High Contrast, Brilliance Laser Inks.This adds a whole new dimension to what I can do with my laser!Granted it is expensive, but it gives an option that you can't do so easily any other way.I did expect a shinier metallic copper look instead of a mat maroon colour, but I am using a 10 W diode, so maybe it just wasn't strong enough for that.The knife in my image is damascus steel and it worked well on that.I have been using thst knife a lot on everything I can find to test it and the ink is holding quite well.This is a good purchase at this price point.
Phil Y.
Reviewed in Canada on October 24, 2023
The media could not be loaded.
Cat Martin
Reviewed in the United States on September 29, 2022
I had purchased a few blank tumblers and a couple flasks to engrave. I had thought that I would just engrave "raw" until I received this product. Wow, it created such a warm, but stand out result! I am making Christmas/birthday presents with this set of tumblers and flasks, but I have been talking to a teacher friend of mine about creating some event awards for kids - the school systems in my area like to have an end of school day where all the kids participate in physical activities like running and stuff and of course they give out awards. Considering they are kids and do want the ribbon, we talked about a secondary award that they could use - a tumbler with the event and date engraved on it. So I have purchased several tumblers with this copper ink used to engrave the event and year, they will be receiving something they can drink from and remember their participation - too cool! Love this stuff and will be using it many, many more times!
theSLAchannel
Reviewed in the United States on September 22, 2022
This is an excellent product- It allows you to use your laser to mark Stainless, aluminum, and other metals that otherwise would be out of reach without a fiber laser.I used it with a 130w CO2 laser. I based my settings on the suggestions on the Brilliance laser inks web page, and adjusted them a bit as they were for a 100w machine. It worked perfectly the first time!The markings are crisp, clean, and VERY dark. The 'red' color is definitely more of a copper color, see the second photo (the close up) for an accurate representation of the actual color of the marking. It looks great on stainless.It's easy to use, too. Spray it on, then let it dry. It only takes a few minutes. Laser the piece, then wipe off the remaining spray. It's a powder once it dries, and it comes right off. That's all there is to it. The marking is VERY permanent- the only way i've found so far to remove it is to sand it off.It seems a bit pricey, but you don't use much so a spray can will go a LONG way. You'll be able to get a lot of work done with a single can.I can't wait to try this out on stainless tumblers.
K. Bunker
Reviewed in the United States on September 16, 2022
In the instructions to this product, both on the label and on the company's website, it is recommended only for CO2, fiber and YAG lasers, not for diode lasers. So I was trying it with my purely as an experiment. To my surprise I found that it worked fine, and without having to use extremely low speeds at 100% power. Testing on a sheet of stainless steel, I started out with slow speeds at 100% power, and first increased the speed and then decreased the power. Interestingly, with this "copper tone" spray, the markings left by the laser came out black with my first tests. Only after increasing the speed and decreasing the power did I start to get something of a copper color. Apparently more laser power burns the pigment and/or binding agent and makes the designs dark. So if you want copper-colored designs with this product, there's actually a fairly narrow range of settings that will work for that. I can give you the figures that worked for my laser, but you'll have to experiment to get the best ones for yours.And the figures are:At 100% power, I got nice dark black marks at 1000 mm/minute and slower.3000 mm/minute at 75% power seemed to be about optimum for getting copper-colored marks.At 3000 mm/minute and 50% power the markings seemed to be fading a little.At 5000 mm/minute and 50% power the markings were definitely faded.It should be noted that products like this work by bonding a pigment onto the metal surface; they don't engrave or etch the surface. However, as long as the laser settings are good, the printed designs will not scrape off. To remove them requires aggressive sanding that removes a layer of the metal surface as well. My guess is that some kind of chemical bonding with the stainless steel is taking place.(Sorry I have no picture accompanying this review, but my test sheet ended up as a jumbled mess.)
D.C. Brooks
Reviewed in the United States on December 6, 2022
This copper marking powder spray is really neat and the end results are unique, depending on surface applied too and setting used to burn can be from bright copper to dull red reminiscent of rust. Application is easy but once dry the marker powder can be wiped off very easily. Many variables to adjust to get different results but when you have your settings right the results are stunning.
Recommended Products