Shopping Cart

Your cart is empty.

Your cart is empty.

CASEMATIX Portable Recorder Case Compatible with Tascam Portacapture X8, DR-05x Dr-40x 22L 100MK 100MKiii 44WL Recorder, Mini Tripod, Adapter, Mic Windscreen and More - Customizable Hard Case Only

Free shipping on orders over $29.99

$28.99

$ 12 .99 $12.99

In Stock

About this item

  • Casematix Digital Recorder Case is great for storing yourhandheld recorder and accessories such as mini tripod , small adapters , cables , chargers and more
  • Hard shell exterior prevents your Portable Audio Recorder from being crushed. Internal tri-Layer foam cushioning with diced foam customizable middle layer protects from impacts and drops.
  • Customizable Foam interior allows you to design separate compartments for your recorder and accessories. Remove the desired amount of foam blocks from the Diced Foam interior to create needed compartments
  • Individual Cubed Foam Interior allows compartments to be created within maximum internal dimensions of 11.0" x 7.00" x 2.25". External Outer Dimensions of the case are 12.0" x 9.5" x 3.5
  • Recorder Case Compatible with DR05 , DR-05x , DR05X , DR40 , DR-40X , DR-07X , DR100MKIII , 100MKIII Dr 05 , DR-10SG , 07X , 40Xand accessories - Includes Case Only by Casematix , Not associated with manufacturer



Product Description

CASEMATIX - Protecting your stuff is our business.

voice recorder travel case

CASEMATIX Travel Case with Customizable Interior for Voice Recorders Compatible with Tascam DR-05X, DR-40X, 22L 100MK and Accessories, Case Only

The CASEMATIX Voice Recorder Travel Case features a customizable foam interior that will perfectly accommodate your voice recorder and accessories like your miniature tripod, adapters, batteries, cables and chargers. In addition to the protective, mixed-foam interior this case also features an impact-resistant hard shell exterior. Don't settle for a flimsy, restrictive case for your expensive voice recorder - protect your valuable equipment with a premium carrying case.

hard shell exterior

Body Armor for Your Voice Recorder - Crushproof Exterior

Each case's hard shell exterior is constructed from ultra-durable hard polymer composite plastic, offering maximum impact protection for your recorder and related accessories. Sure, you could toss your voice recorder in a backpack or soft carrying bag - but if you want 360 degree protection for your gear then a CASEMATIX hard case is the way to go.

External dimensions: 12" x 9.5" x 3.5"

foam interior

Shock-Absorbing, Customizable Dense Foam Interior

Our CASEMATIX Voice Recorder Travel Case features a thick egg-crate foam top and includes a layer of dense, pre-diced foam that can be perfectly customized fit your voice recorder, mini tripod, batteries, charging accessories and more. Your voice recorder and accessories will be surrounded by a mix of foam types to absorb shock from bumps and drops.

Internal dimensions: 11" x 7" x 2.2"

monitors dl professional dr-x tape interface dmkii multitrack jack th-x mkii

Durable and Comfortable Carry Handle

This case is ideal for travel with its briefcase-style design and carry handle. Whether you're traveling by air, by car, or just need a safe carrying solution for your voice recorder when moving around the studio CASEMATIX has got you covered.

heavy duty

Heavy-Duty & Easy-Open Latches

For optimal protection and convenience, we utilize a heavy-duty latching system on our cases. Just because our latches are rugged and reinforced doesn't mean they should be a chore to open up, though - so our latches have also been designed with easy-open functionality. You should be able to access your voice recorder easily when you need it AND feel secure that your case is going to stay closed when you don't.

hinges durable

Smooth Opening, Long-Lasting Hinges

The hinges on our cases have all been reinforced to withstand a lifetime of opening and closing. Your voice recorder is in good hands with CASEMATIX.

padlock rings

Padlock Rings for Added Protection

Worried about traveling with your valuable voice recorder and accessories? No problem - this premium case features built-in padlock rings so you can toss a lock (not included) directly onto the case and travel with the confidence that your voice recorder is protected.

lifestyle

Protect your Voice Recorder and Accessories - Ultimate Protection from Dust, Drops and Damage

Protects your voice recorder from:

  • Dirt
  • Dust
  • Drops
  • Grime
  • Impacts
  • Scratches
  • And More!

M. Pappas
Reviewed in the United States on July 31, 2021
This is a very cost effective case with easy to use pre-scored foam. I am using it for a hand-held audio recorder and its accessories.
DAM
Reviewed in the United States on April 5, 2021
The case was easy to customize and made a perfect little case to store an AirSoft Elite Force 1911 Tac pistol with all the accessories. Plenty of ways to arrange the foam padding, including using the removed sections for thickness as well.
Luigi Lobato
Reviewed in Mexico on April 21, 2021
En general esta bien el estuche sin embargo no es practico el que tengamos los clientes de hacer los cortes en hule espuma para tratar de acomodar la grabadora y aditamentos, no me quedaron bien los cortes :(
Guillermo flores de la Vega de velasco
Reviewed in Mexico on September 18, 2020
Excelente producto
José D.
Reviewed in Mexico on October 27, 2020
Quedó excelente para mi TASCAM DR-70D
AndyNYC
Reviewed in the United States on July 15, 2019
I bought this case to securely transport a Tascam DR-40x digital recorder and accessories. For that purpose, it works very well! Because the foam compartment is completely customizable, I would recommend laying all of the equipment/accessories you have out first and making sure you are positioning everything as efficiently as possible. Once you have removed the foam "cylinders" to house each component/accessory, it is possible to place the foam back in to reconfigure the setup, but it won't look as cohesive as it did before you removed the foam to begin with, so planning ahead is advised.The most important thing for me is that everything I needed to have fit in the case did, and I am pretty sure it would survive a drop and be well protected in such an event.
Luis arcos
Reviewed in Mexico on April 7, 2019
Excelente costo y practicidad
Jenaro Pliego Fox
Reviewed in Mexico on September 6, 2018
Un estuche adecuado, ideal para la Tascam DR40, ligera, y rígida.
Richard Liebespach
Reviewed in the United States on May 9, 2016
If I had wanted an internal dimensions of 11.0" x 7.00" x 2.25"I would have rated this 4 stars.In the description it measured 1 inch wider and longer and a bit deeper (12.0" x 9.5" x 3.5) than the case I'm using (case for 3 Samson R21 mics 11x3x8). in reality, the usable area is smaller (11.0" x 7.00" x 2.25"). It is deeper but only about a 1/4" longer because part of the size they measured is a rim that flares out from the main body. Also it is not as wide... functionally. The inside is partly consumed by the handle. While this was visible in the picture, it didn't sink in before I bought it.(I did not notice that it says - internal dimensions of 11.0" x 7.00" x 2.25".... I saw 12.0" x 9.5" x 3.5... but didn't pick up on it saying "External Outer Dimensions of the case are" )Was it my fault? Yes.The loss of space because of the handle is to me, dramatic. The functional space is less than my original case.See the "Samson R21 Dynamic Vocal Microphone - 3-Pack with Case"in the Samson case I carry a Tascam DR-40 4 channel digital recorder, an ATR-2100 mic, a Samson R21 mic, the ATR-2100 mic stand, 2 6' XLR cables, ATR-2100 compatible USB cord, camera tripod clamp mount to hold a smartphone, a wind muff for the built-in mics of the DR-40, a USB memory card, and ear buds.I cannot fit all that in this case. The closest I can come is to leave out 1 mic or leave out both XLR cables.I will be buying a different case. I'll keep it to avoid the hassle of sending it back.I just placed an order for the:Smatree® SmaCase G360 Large-Size Case for Gopro Hero 4/3+/3/2/1 and Accessories (13.4" X 9.4" X 3")- Travel & Household Case with Excellent Cut Foam Interior - Perfect Protection for Gopro Camera - Black & Red (Fits 2 to 4 Cameras)It's not a hard case (it is a firm case), but it is thick enough for me to add a thin layer of foam above and below the tascam, the rest is non-electronic. Now I should be able to add the extra/taller mic stand (Hamilton Nu-Era Tabletop Mic Stand)UPDATE:05/03/2017I stand by all I wrote above.The Smatree® SmaCase G360 worked out great. I no longer use it because I added more stuff to my studio. While I was using it it met my need beautifully. I loved the look of people as I took more and more stuff out... like felix's magic bag...I did find a good use for this case.I now use it to carry my class gun (I'm a firearms instructor). This is large enough to carry my gun and lots of ammo. It is a good solid case and should have a long useful life.I'm bumping this review up to a 4 from the 3 I originally gave itThe case is worth it (if this size is what you need - an internal dimensions of 11.0" x 7.00" x 2.25"),the description was slightly misleading.
Kenneth V.
Reviewed in the United States on March 29, 2016
So far so good. Took some time and planning to arrange the items the first time. I used chalk to outline each item and then plucked individually to fit. I use this for my Sony wireless transmitter kit (reciever and lapel mic transmitter), microphone and XLR transmitter, Tascam dr-40, adapters, chords and spare batteries.I had actually left this case on the roof of my car while packing other equipment and drove down the block and watched the case slide down the street next to me as I stopped at a stop sign and there was no damage to the stuff inside at all. Just some minor road rash scratches on the outside of the case from the cement. Case is still in great working condition after this. That's how I knew this was worth the price
DSWhite
Reviewed in the United States on December 18, 2016
awesome case for tascam DR-07 MK2 and the DR-05, some tips, the foam is deep and has a layer of protection below the cut out foam, and its deep enough to put the tascam recorders in sideways, (i have 3 recorders in my case now) also, when you add a small tripod, the depth of the foam leaves plenty of room to add the usb cables on top of it, one more tip, save the blocks of foam you take out in case you want to change things around latter for a different item, putting the foam blocks back in isnt perfect as they are loose but it works well enough to still function like it should with protection and keep things in their place, truly its a awesome case for tascam field recorders, just wish i would of tried them sideways first instead of following the photos, but all is good, im real happy with this case
JIMnLIN
Reviewed in the United States on June 24, 2015
Very Pleased! Easy to customize to fit what-you-may-have! I got perfect fits for my Tascam recorder, mini-tripod, spare batteries, with room for more. Following the instructions I got openings with very clean edges and good three dimensional fits. The internal cushioning and the outer case will protect the contents if it is dropped. The finish is a matte black so it is not obtrusive. Perfect for carrying and protecting my recorder when I go to the jazz club to record live music.
Aaron
Reviewed in the United States on January 13, 2015
I got this case to protect my Tascam DR40 and it seems to be nice and durable. The latches are really strong and easy to use, but the pick and pluck foam was a little tough for me in the beginning. Once I got the hang of it, it was no problem. Overall a nice case.