Your cart is empty.
Your cart is empty.Coleman-Mach's 08-0033 Cool Only Control Package is only compatible with non-ducted ceiling configurations that have a wall thermostat. The compatibility of the control package will depend on the existing thermostat and not the air conditioner unit. Refer to manufacturer recommendations to ensure a proper fit.
Greg Long
Reviewed in the United States on July 9, 2024
As I mentioned in the headline, do your homework first and this should be an easy install. Every RV is different, I pulled the +12V/-12V from a nearby USB port for the power supply for the thermostat. There is a lot of YouTube available to install this as well. Take your time. Check your connections.
Christine In Florida
Reviewed in the United States on July 12, 2024
Replaced the one in my 2022 travel trailer. The original was connected wrong at the trailer's assembly plant and it very slowly burned the wires then a/c stopped working- fortunatley no fire. The replacement works great!
Dan at AFT
Reviewed in the United States on July 10, 2024
Ordered this for our new ac unit. Didn't look exactly like to old one but it works as expected. The electrical connections were plug and play. The price was fair and it came quickly.
Courtney Krell
Reviewed in the United States on October 20, 2024
Had a Coleman Mach AC gave to me after my kids camper air went out. Did not come with controler this one was plug and play works great
Sorensen Bunkhouse
Reviewed in the United States on October 2, 2024
Worked perfect our my 09 Jayce Jayflight
EveryInchRV
Reviewed in the United States on July 30, 2023
Bought this as a replacement for one of my customers to get his AC working again. This will work in a ducted or non-ducted system. My only complaint was that the hardware package was missing. Thankfully was able to use hardware off my supplies in my truck.
stan1137
Reviewed in the United States on March 26, 2023
There were no instructions as others have mentioned but a diagram was on the unit, it requires wire for -12v, compressor, low and high fan. Bolts were already in place to mount to.I used a Honeywell RTH2300B thermostat which only has one fan setting so it had to be either low or high fan which was fine with me as I only used low fan setting.It was a little confusing at first, I thought I could use existing furnace thermostat wiring, it had +12v but the control board required -12v. I am not sure why that is. Luckily I had existing wire ran to a gas monitor so I had a -12v source in the same wall panel that I could splice into without having to run new wire. It puts my +12v and thermostat -12v on different fuses but that's ok I have it marked on panel.The worst part of this was having to run the thermostat wiring. Why Forest River did not install this to begin with or at least run thermostat wiring as option to install at a later date is beyond me.It makes a Big difference having this installed, it was a pain trying to adjust knobs and I did not like fan running all the time when it was on.
big mike
Reviewed in Canada on November 30, 2023
Sent pigtail to rewire way better
Jean-Guy
Reviewed in Canada on August 17, 2020
Expedition très rapide et la description très exacte.
Customer
Reviewed in Canada on August 11, 2020
This Airxcel controller works great. It was an exact match and fit. When the dealer told me I need a new AC unit, I thought I'd like to do a little exploration first. I found the compressor relay inside my controller was not functioning. I jumped it to test and sure enough the compressor started and the AC worked. I would not hesitate to recommend this product.
Dan
Reviewed in Canada on October 8, 2020
Worked out perfectly in our camper, simple install, removed old controller and installed new one, Air conditioner works now
Ryan Pekrul
Reviewed in the United States on August 21, 2019
I installed this control unit in my RV before my vacation trip. Everything worked beautifully for one week. After that time the air conditioner compressor failed to activate. Following the troubleshooting procedures the failed area is in the compressor load circuit 115VAC. The wall thermostat passed all tests. I will try to find out if this unit is covered under any warranty.
louis schummer
Reviewed in Canada on August 18, 2018
The R&R of the unit was easy and straight forward. Make sure to turn off both AC and DC voltage while doing the remove and install. Air conditioner fired right up after install of new board without flipping breakers. Guess I may have have had bad/stuck relays in old board. Running nice and cool!
Recommended Products
