Your cart is empty.
Your cart is empty. Sometimes a standard controller just gets boring or maybe you want to add bullet buttons to a custom controller you made! Regardless of the reason, adding a set of Crazy Controllerz bullet buttons to your Xbox Series X or Xbox One controller in place of the A,B,X,Y buttons is sure to make your controller one of a kind. Your friends won’t be able to resist checking out your controller and pressing the bullet buttons a thousand times… They go great with war controller designs as well!
Important Advantages
• Adding a set of bullet buttons gives your controller a one of a kind look. You’ll make all your friends jealous when they check out your controller and it has real 9MM bullet casings in place of the A,B,X,Y buttons.
• Each bullet button set is hand made using real 9MM spent bullet casings. The bullet casings are hand selected and polished to give them a brand new shine. The bullet casing brand that each set is made with will vary.
• With the included tools, installation is easy. Simply disassemble the necessary parts of your controller, remove the original A,B,X,Y buttons, drop in your new bullet buttons, and reassemble your controller! Installation takes about 1 hour.
• This kit includes the Torx T8 security screwdriver, Torx T6 standard screwdriver, and plastic prying tool that are required for installation as well as replacement screws incase a screw is lost during installation.
Crazy Controllerz is not responsible for any damage done to your controller during the installation process. Installing these bullet buttons requires opening and disassembling parts of your Xbox One or Xbox Series X/S controller. Install these bullet buttons at your own risk.
Vince
Reviewed in the United States on August 17, 2024
Be prepared for taking apart the entire controller!!! Cool buttons haven't installed yet, found out I have to take apart the controller and all the circuit boards. I'll get around to it eventually. 🤣
Matt Gordon
Reviewed in the United States on May 27, 2024
Wasn't hard for me to installBut if your not familiar with intricate instalation. There is YouTube videos that will walk you through it. I recommend buying the 10 dollar tool kit they sell as well on Amazon. Took maybe half an hour to install. The weight of the shell casings proves there real. Great look and works good
Jett
Reviewed in Australia on February 19, 2024
Very great look and build quality, however the fit is just not right, it sits a tiny bit too small making them able to wiggle around, other than that amazing
Tim Cyr
Reviewed in the United States on February 13, 2024
The buttons fit good, and there is a little bit of play from side to side as the diameter of 9mm is a little smaller than the original A, B, X, Y buttons. 10mm would’ve been closer to the actual size of the original buttons.Obviously they’re not as comfortable as the rounded smooth buttons that come with your controller but I understood that when I bought them. My only real con would be that the B button does sit a little low, it would’ve been nice to have it a couple cm taller.
Huskylover13
Reviewed in Canada on November 10, 2023
Customized friends controller because he saw mine absolutely loves it. The buttons are really nice to use no complaints. Easy installment would recommend to anyone.If you’re first time or I would recommend looking it up and making sure you look up the correct Xbox, which is Xbox controller S/X not one.
Austin
Reviewed in the United States on September 8, 2020
Very Impressed with the quality of the bullet buttons. They have come along way since the xbox 360 ones. the make is nice and they fit quite well. little wiggle room on the sides between the shell but its not a oem part so no biggie to me. They press down just as easy as the stock buttons with no issue. Do take care when installing them into the Elite controller if you are a beginner because you can rip some wires off if you are not using a soldering iron. Side note: Received an email from the company the day they were being delivered letting me know when they should arrive and they included video instruction on how to install them as well. Very impressed 10/10
Jeff
Reviewed in the United States on January 16, 2020
Comfortwise these buttons tank badly in that category but as for looks they look great when you first get them but if you play with that controller all the time it will wear off. Just know what you're getting yourself into before buying these buttons to customize your controller because its not as easy to assemble as you would think. Now the shotgun joysticks are easy to install. But they are big so they arent comfortable either and it too wears off but wayyyy faster than the actual abxy buttons. All in all its an ok product. More of a novelty than necessary if you ask me
Timbercreek
Reviewed in the United States on January 12, 2020
My grandson wanted these buttons on his new controller so I installed them. Installation is a pain (and I have 40 years in electronics) but do-able if you have the tools and knowledge. If you don't have experience servicing electronic devices, I would not recommend attempting this on your own. To remove all the screws for disassembly, you must remove or puncture the serial number label after which I would assume that any warranty work would be denied. That's just about a given with any warranty company.Once installed, the buttons have a sloppy feel (but they look cool!) and after about five minutes of use, my grandson said that they were nowhere as good as the original buttons so I went through the disassembly again and re-installed the originals.Basically a waste of 10 bucks. Stick with the original buttons - they were put there by design engineers and passed through multiple factory quality control tests. Plus, that's one less reason the warranty company has to deny your claim.
Anthony King
Reviewed in Canada on March 25, 2019
Definitely feels like real bullet casings I definitely recommend them. Just make sure to watch a tutorial video. The seller is very friendly.
AZmom
Reviewed in the United States on November 4, 2019
My teen son asked for these buttons (with the matching thumb controllers) to customize his Xbox One controller. The swap out was no small task. He was so frustrated and upset at one point, I thought he would start crying; he is absolutely not a crier. First, there are no written instructions. There is a youtube instructional video. Secondly, he had to take it completely apart at least five times over several days period, just to get all of the buttons to work properly. His stepdad had to finally help, which required a trip to Home Depot for solder and a soldering iron because my son accidentally pulled off one of the wires in the middle of all of this. I fully expected to have to buy a new controller. He said if he had to do it all over again, he would not. Personally, I wouldn't have the patience or the know-how to get the controller back together and working again. (I wanted to throw it away.) All of that just to change out the buttons. I don't really think it's the quality of the buttons, per se, but the ability to know how to take apart a controller and swap the buttons out. The price is acceptable for the product, but the amount of work and effort to get those in and working properly, not worth it.
Biggdubbya
Reviewed in the United States on December 10, 2017
I got these buttons to replace the original set that came with the Xbox One-S controller for my son and I actually ended up putting together a completely custom controller all just from buying these 9mm bullet casing buttons to start it all. These not only look fantastic, but they actually feel pretty good for being authentic 9mm bullet casings used as buttons. If you're looking for a nice little way to change the looks of your Xbox One(s/x) controller then I suggest starting off with the buttons and a new faceplate to go with the new buttons. I can say that I have learned that it is actually a hell of a lot better when I have absolutely everything I need to or want to change out on a Xbox One-S controller all at the same time, so that way when I take apart one of my Xbox One-S controllers I'm not having to put it back together just to take it back apart the very next day. I personally suggest that you get yourself a game plan together and it might help to make a list of what you're looking to swap out and what you're overall look that you're trying to accomplish in your design. Believe it or not you can absolutely customize the entire looks of a Xbox One-S controller and if you go about it the right way it shouldn't cost you that much in the end, but if you were to design a Xbox One-S controller through the Microsoft Xbox then you're looking at a price tag of that around $100. I personally don't think it's even a question for me to do the work myself rather than to pay for a outrageous amount just to do what I can do for myself
Recommended Products
$75.99
$ 36 .99 $36.99