Your cart is empty.
Your cart is empty.Product Description
The DWD520K 1/2-inch VSR Pistol Grip Hammerdrill Kit can be set to either drill or hammerdrill mode for applying to masonry, wood, or steel. Includes a 2-speed range for high speed drilling or torquing. Soft grip handle and two-finger trigger increases user's comfort and control.
Amazon.com
Offering the versatility of dual-mode operation, the DEWALT DWD520K 1/2-Inch VSR Pistol Grip Hammer Drill Kit is a powerful tool with easy handling. An all-metal gear housing increases durability and heat dissipation in repetitive drilling, while its user-friendly design features let you work comfortably, longer. This kit includes a heavy-duty box for storage and portability, as well as 360-degree locking side handle, steel depth rod, and chuck key with holder.
1/2-Inch VSR Pistol Grip Hammer Drill Kit
At a Glance:
- 10 amp motor with patented design for 50-percent more power and overload protection
- 1/2-inch capacity in steel, 1-1/2-inch in wood, and 5/32 to 7/16-inch in concrete
- Dual speed range (0 - 1,200 / 0 - 3,500 rpm) for greater versatility
- Includes 360-degree locking side handle with soft grip
- Backed by a limited three-year warranty
The 360-degree, locking side handle gives you additional leverage. .Powerful Patented 10-Amp Motor for Robust Performance
The DEWALT DWD520K 1/2-Inch VSR Pistol Grip Hammer Drill's powerful performance is provided by a robust, 10 amp motor with a patented DEWALT-exclusive design that generates 50 percent more power and increased overload protection. The result is enhanced productivity, durability, and value.
Dual-Mode Feature and Two-Speed Range for Work With Various Materials
As versatile as it is powerful, the DWD520K offers the convenience of a dual-mode feature that lets you handle hammer drilling as well as a range of drilling applications in masonry, wood, or steel. Specifically, it offers a 1/2-inch capacity in steel, 1-1/2-inch capacity in wood, and 5/32 to 7/16-inch capacity in concrete so you're ready to take on a variety of jobs.
And you'll enjoy increased control with a two-speed range (0 - 1,200/0 - 3,500 rpm) that gives you greater control in high-speed, high-torque applications.
Comfortable, Lightweight Design for All-Day Jobs
To keep you working comfortably, the DWD520K has a soft-grip handle, two-finger trigger for precision, and a 360-degree locking side handle with soft grip for greater control and versatility. It also weighs in at just 6 pounds and measures a compact 14 inches long for lightweight handling that minimizes stress on wrists and hands, and easy portability.
Warranty Information
The DEWALT DWD520K 1/2-Inch VSR Pistol Grip Hammer Drill is backed by a limited three-year warranty.
What's in the Box
1/2-Inch VSR Pistol Grip Hammer Drill Kit, 360-degree locking side handle, steel depth rod, chuck key with holder, and kit box.
This hammer drill's dual speed range gives you the versatility you need
for working with a variety of materials and applications.
Robbyg
Reviewed in the United States on January 16, 2025
I bought the DWD520K because my ten year old DWD525K disappeared out of my pickup truck at a Job site. The 520K is the same thing except the Handle is at the end and not in the center.These are excellent work horse drills. You cannot run them non stop for hours on end but you can use them for a reasonable length of time before letting them cool for a bit. Kind of like my aging body :)Love the drill and it's perfect for me because I try to avoid the newer self tightening chuck heads.Those work okay for light Jobs but the Chucks fail when the Job is tough.
David Bovie
Reviewed in the United States on September 12, 2024
The drill is very heavy and you have to wear a very heavy glove to hold it as it gets extremely hot when drilling stainless steel. For normal drilling, its fine, but hard to handle. The large trigger is easy to squeeze unexpectedly while trying to handle the drill which always surprises me. You have to want a serious drill and excercise extreme caution when using this drill, but once you master its ergonomics, its a drill for life … recommend for a young man who performs demanding work and can handle it !!
buzzie
Reviewed in the United States on October 31, 2024
My son uses this to build ALL his planters for Dragon Fruit trellis construction
Jorge Muñoz
Reviewed in Mexico on May 6, 2023
Es lo que esperaba, un poco pesado pero bastante eficiente.
J Antonio Vidal G
Reviewed in Mexico on July 2, 2022
El rotomartillo lo compre, por que se me hace una excelente marca, más la promoción ya que lo compre a casi la mitad de su precio actual, y para trabajos pesados me ha sacado de las broncas sin problemas, yo lo recomiendo
Alberto Cardena
Reviewed in Mexico on September 10, 2021
Solo lo he usado una vez, pero se nota su construcción de gran calidad y resistencia, es muy potente, es un poco costoso, pero en general la marca es costosa, se trabaja muy bien con el, muy fácil de manejar y alternar entre las dos velocidades que tiene y el modo rotomartillo, lo recomiendo mucho para uso casero e industrial.
Mickey O'Tool
Reviewed in the United States on August 17, 2021
I drilled 20 holes into stucco and solid concrete block, 2-inches deep, with a 7/16 inch drill bit for a hurricane panel. Each took about 30 to 45 seconds. Easy with this drill. It's got all of the features that you might need, including a metal motor housing, an adjustable second handle, 2 speeds (each variable), a hammer on/off setting and a depth rod. The grips are perfect. The drill is heavy and well built. The case is sturdy and well-designed. Remember to wear a mask to protect against concrete dust and eye protection just in case something goes flying.
UZIEL CV
Reviewed in Mexico on October 6, 2021
El producto funciona muy bien, considero que su uso es para un nivel intermedio de trabajo y no creo que sea capaz de funcionar en ambientes rudos.
Jan Simmons
Reviewed in the United States on April 9, 2020
I purchased this drill to use primarily as a hammer drill. It is, indeed an an attractive unit, and appears to be well built, but that is a deception. After drilling approximately twenty holes for half inch rebar and ten holes for tapered mounting studs the hammer function stopped working. After nearly twenty minutes of drilling with a variety of 1/2” masonry bits it barely penetrated two inches in a concrete slab. The accessory handle is impossible to use in the hammer mode-it vibrates off almost immediately. What you are left with is a very nice looking drill properly suited for drilling wood and softer materials. If you want a real hammer unit, do what I just did-suck it up and order a Bosch.
Pakkome
Reviewed in Mexico on June 2, 2019
Sencillamente muy potente, pesado como deve de ser la herramienta de hombre, este no es para aficionados, llego en su estuche
cartoon lover
Reviewed in the United States on December 18, 2012
I have been using the dewalt dwd210g, for a month now, and I love it because of the impressive 980 W power at 5.1 lbs, and its rather remarkable stamina and reliability. I decided to try the 520 because the guts are the same, the motor, speed, heat/overload protection are the same as its sister model 210.The 210 is the same as the 520, with these changes:(1) hammer drill(2) two speeds (400-1200, and 800-3200 rpm)(3) 1 lb heavier(4) 1.7" longer.(5) carrying case included.The 520 shares the same flaw as the 210, that it does NOT do low speed rpm. (400 rpm minimum). Not good for steel. unless you pulse it. Thats why I took off a star. but hey, 10 amps of hammerdrill in a 6 lb package, thats not bad.This is comes with standard adjustable drill chuck and NOT an SDS (spline bit) hammer drill. Any adjustable chuck will tend to loosen on continuous hammering, unless you tighten it correctly. The 520 comes with an oversized t-handle chuck key. Make sure you tighten all three chuck key slots and that should hold any bit in place, including round shanks.
DeusEx
Reviewed in the United States on February 12, 2011
For years I done thing the hard way. A standard power drill and a masonry bit. Only drillig into concrete or bloock on occasion I didn't feel the need to buy a specialized tool just for that. I wish I had... The project I needed to tackle involved quite a bit of drilling into block. And this 10 amp monster ate right thru it! What used to take minutes (lots of minutes) took mere seconds. I was able to drill and mount using tapcons the entirety of all of my gang boxes and ledger boards on my garage revamp in just a couple of hours. And that included a lot of breaks :) I'm extatic with my purchase!!!This drill features a keyed 1/2" chuck. A 360-degree mountable and removeable front pistol grip. Two drilling speed ranges plus the obvious hammer mode. It's a no nonsense tool that for it's size and weight is extremely well built and powerful. The guide is a terrific accessory that gives you precise deapth control. It also includes an extra large chuck key to save your fingers if changing out bits. Personally I think a second drill works better though. All in all, if you have a job that invovles putting holes in concrete, then you need to buy yourself one of these. Hands down then best drill I've ever used!
Stevo
Reviewed in the United States on November 24, 2011
Great drill - 1200 watts thats power to spare and results in effortless drilling.Variable speed, 2 gears, Hammer Drill function.I did read somewhere that some people had problems with the drill bit slipping because the chuck becomes loose when using the hammer drill function.My response to that is to tighten the chuck with chuck key in each of the 3 holes. I drilled 3 seperate holes each 20mm hole through approx 7 inches of granite using the hammer drill and an irwin joran drill bit, no problems not once did it loosen up.I bought it for use in Australia so being that it's a 110v drill I hooked it up to my 2000w 240V > 110v step down transformer. Australia runs at 50 cycles while the US runs at 60 cycles doing the math I dropped about 60w of power not much of a price to pay with that much raw grunt.Some may find it a bit on the weighty side, but I don't think it is.It's a quality bit of kit, and I'm already looking at a DeWalt cordless for those lighter jobs when I need a cordless screwdriver.Great purchase at half the price I pay in Aus for the same item.
Recommended Products
$176.00
$ 78 .99 $78.99