Your cart is empty.
Your cart is empty.Product Description
Dominator Cycles is a manufacturer of premium quality and distinctly styled motorcycle parts and accessories. All of our products are designed and made in the USA and our five-star customer support, customized products, and limited lifetime coverage will make Dominator a partner you and your bike can partner with for years to come.
All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment.
All of our parts are hand-made in the USA employing a multi-step manufacturing process using the finest materials. We pride ourselves on being a manufacturer of premium quality and distinctly styled motorcycle parts and accessories.
- Lifetime Coverage against manufacturer defects
- All bars are Fully TIG Welded
- Beveled & De-Burred
Superior Quality
There have been many copycat attempts to replicate our products but many customers over the years have come back because of our superior quality.
We also pride ourselves in our smooth and clean arched corners whereas competitors often use straight sharp edges which are easier to manufacture but fall short of the premium styling distinguishing riders’ demand.
- Carefully designed to provide natural, relaxed grip angles
- Optimal pullback comfort
- Direct bolt-on replacements for stock equipment
- Hassle-free installation of bar tubes
Dominator works on the principle belief that riders want the best of the best with no compromises. Ride comfort and easy installation make choosing Dominator Industries handlebars to customize your bike a no-brainer.
All in 1 Handlebar Kits!
Dominator Industries has partnered with Cable Kits Brand to create a one-stop handlebar kit solution. These kits are strictly comprised of components manufactured in the United States. It’s everything you’ll need to complete a quality bar install.
The Original Pre-Wired
What is it worth to have your project be as simple and easy as possible? We feel it’s worth everything so we’ve gone ahead and done all of the hard work for you. Our bars are prewired with your switch wiring and set up with the ability to pull your existing twist grip sensor in literally under 10 minutes!
Saves Money
We all know what the dealer charges to switch out and wire your bars, or any experienced tech! We’re extremely confident that we can save you hundreds of dollars! Who doesn’t wanna save money!?
Remove the Headache
Those of us who have swapped our bars know, beyond a shadow of a doubt, that wiring new bars can be a daunting task. Because of this, we set out to fix that and provide you with solutions that virtually eliminates the headache.
For many bikers riding a motorcycle is not a hobby or need, it’s Passion.
We get that. The sheer enjoyment of being on a motorcycle with the open air with the wind brushing through your face, the sound of the engine and the vibration you feel. It’s an embracement of the senses and what we try to convey into every Dominator product.
Al Bredeson
Reviewed in Canada on January 8, 2025
Handlebars are good quality and look great. Always buy the pre wired ones !
Alejandroid93
Reviewed in the United States on September 23, 2024
These are easy to install pre wired and look amazing! They did have burs on the grip ends like previously stated on other reviews but I had Emory cloth to clean them up and the grips cover it so still looks great quality on the rest of the bar is great.
Customer
Reviewed in the United States on August 9, 2024
Not only does it looks good on the bike. But it makes my ride more comfortable and improved the handling of my ride.Nice fit and quality and value for money.
Customer
Reviewed in the United States on July 4, 2024
First off, watch the video!! The most important part is taking off the original casing from the throttle wires and replacing it with shrink wrap that comes in the kit, after doing that we attached the cable that is in the bars and taped it all up, then we put shrink wrap over all of that to about an inch on the cable, applied spray silicon for lube, an believe it or not, the wires went thru the first time...Lucky or not, I don't know, but we believe it was the shrink wrap on the last 4 or 5 inches that did the trick...These 12 inch bars went on a 2016 HD Tri-glide and I was assisting an MMI trained Harley Davidson mechanic with the real knowledge...Thank you Matt... Good luck to you all...
steve west
Reviewed in the United States on May 18, 2024
Ease of install, Harley has a lot to remove to get to bar mount on the triglide. Made riding easier and more comfortable!!
Eric Pacheco
Reviewed in the United States on April 16, 2024
Great bars for the 2015 Harley Ultra. Ordered the pre wired and install was a breeze! Highly recommend! Used stock clutch and brake cables.
Rolando Molina
Reviewed in the United States on December 6, 2023
Extremely pleased with the new bars. Fairly easy to install with the information and links provided. I was thinking about doing this upgrade on my 14’ ultra limited for quite some time and just regret not doing it sooner.
Carly Danyel Cramblit
Reviewed in the United States on December 2, 2023
Reviews and videos make this look easy but found more difficult than expected. I was able to pull the throttle by wire without de-pinning the connectors.I got the 12” 1-1/4 bars and for some reason the ignition switch plate was hitting the bars. Had to use a dremal tool to remove areas touching the bars.Routing the clutch cable was pain as well but, it’s done! Looks great! And glad I did it. Much better than factory.(Update) first attempt to ride brought several trouble codes. The fix? was resetting them. You might not get these if you first- disconnect the battery.
claude bilodeau
Reviewed in Canada on August 11, 2022
Flhtk 2014 j’ai fait quelques petites retouches mais vraiment super communication avec le vendeur merci
Customer
Reviewed in Canada on October 8, 2022
Bought this for my street glide it's perfect just wat I want ..looks nice and super comfortable to ride now .. 👌
Bert de Smit
Reviewed in Canada on February 24, 2021
Bars look great on my ultra. Took bike shop 2 hrs to install the pre-wired bars.
Doyle Schwengler
Reviewed in Canada on April 5, 2021
Would have been a 5 except the instructions were a little vague for a first time.
Kelly
Reviewed in the United States on July 9, 2020
Got the bars yesterday... on the outside they look decent... but that’s where it ends... they’re “pre wired” but don’t plan on adding any other wires because they just won’t fit... after working 10+ hours on trying to wire the tbw and heated grip controls I gave up and pulled the “pre wired” wires out and cut off the thick plastic loom that was used... 5 hours later I got the bars wired strand by strand only to discover in doing so it broke a connecter inside the bar because it got stuck... I now have to pay the dealer to replace the tbw sensor and rewire the bars...I contacted the manufacturer directly and asked that someone call me back ASAP so this could be sorted... instead they opted to email me YouTube video links for installs that didn’t pertain to my bike... I submitted pictures of the connectors and was told I ordered the wrong bars and that since I’m incapable of doing to box up the bars and send them and they would do it... at an additional cost... I declined because that would mean my bike could be down for 2 weeks or more... I asked for a better solution and there refused any help what so ever... I advised them that I’d take it up with amazon and let them deal with it... I was told to go ahead because they don’t deal with amazon... again... zero support from Dominator...
Recommended Products
$29.99
$ 14 .99 $14.99