Your cart is empty.
Your cart is empty.Product Description
Mark Calvert
Reviewed in the United States on January 26, 2025
The gauges were easy to use (my first time using a radius gauge). Easy to see the radius of the neck using the bottom of the gauge and finding the best fit. Easy to adjust the bridge by seeing the 2 E strings and then adjusting the others.
Chris Willey
Reviewed in the United States on March 23, 2024
These do work, and they are cut to the correct radius of each of the gauges, I checked them against a different set to verify. They do indeed work, depending on how you intend to use them. My use, understring at the saddles to verify proper radius while doing a setup. For my intent, they only sort of work. The "T" section of the gauges are much wider than they should be. They worked okay, for my Les Paul with a tune-o-matic, since the bridge sits up higher off the body. On any of my other guitars they were just to wide. On my tele, they would hit the bridge plate so I couldn't use them. On my Ibanez and Charvel, they would hit the body. Thankfully I tested them lightly or I would have big scratches in my guitars. Also, they are a little sharp, not as sharp as some, but I would recommend some sandpaper around the edges just to remove the sharpness.
Arundel
Reviewed in the United States on November 8, 2024
Fretboards aren’t *flat*, they’re *CURVED*: playability depends on your frets matching that curveEvery guitarist should have the tools required to keep their instrument(s) properly set up - and should know how to use them
Adam Knox
Reviewed in the United States on January 2, 2023
These work great for the price. They are rather shiny, which makes it hard to get an accurate reading against the strings. Accuracy may not be perfect, but close enough. It's hard to tell. For the price, I am definitely not complaining.
Kenshiro
Reviewed in the United States on April 28, 2023
They are good and personally didn't get my guitar scratched but just be careful because they do seem a little bit sharp, but they definitely get the job done and are decent for the money.
maguitarHD
Reviewed in Canada on March 15, 2022
No sharp edges works as discribed
Chip
Reviewed in the United States on January 5, 2022
Cannot tell about the accuracy for sure but it seems on point. Edges are a bit rough so I gotta be careful to avoid damage to the neck. Perhaps I'll do some sanding to improve the edges. It's not a deal breaker but makes me want to be extra careful when handling them.
Perry Donham
Reviewed in the United States on December 4, 2021
These are either stamped or laser-cut from 0.75mm polished steel. The edges are finished. They seem sturdy. They also are the under-string type, and the arms are thin enough to manage that. I don't have a second radius gauge to measure them against, however the ones that fit my guitars seem accurate when measured against the necks.
Aiden Mark Humpheys
Reviewed in Germany on September 9, 2020
They do the job but the edges have not been finished properly are very sharp. Not much fun to use if you are concerned about scratching the finish on an instrument.
Jose Anto. Murcia
Reviewed in Spain on June 24, 2019
El articulo cumple las expectativas que se anuncian
Jason walker
Reviewed in the United Kingdom on February 9, 2019
Very easy to use for setting correct action on guitar saddles and to find out the gauge of the guitar neck,would recommend this product and seller Thankyou
Scott Baxter
Reviewed in the United States on February 20, 2019
I checked the neck radii of all the guitars I have. I was interested to learn that they all were.The gauge slips under the strings and rocks if it's radius is greater than that of the fretboard.The metal these are made of is thin. They could be bent easily. That's fine by me, because they work well and cost little.
Enzo L.
Reviewed in Italy on October 23, 2018
Semplici da usare...basta fare un giro su YouTube e ci sono tanti video che spiegano come poter utilizzare questi attrezzi per il fai da te liuteristico in casa..grazie a questi calibri si riesce facilmente a regolare senza difficoltà l'altezza delle corde sulla chitarra elettrica in base alla curvatura del proprio manico (basta vedere nelle caratteristiche del prodotto che si possiede)...Non può mancare a chi serve avere chitarre intonate ed efficienti
Recommended Products