Your cart is empty.
Your cart is empty. This is a USB serial TTL 3.3V cable，terminated with a 3.5mm audio jack connector which provides access to the TX, RX and GND signals.
Note:
PINOUT: Tip- TX (device-RX), Ring-RX(device-Tx), Sleeve-GND. please check the pinout carefully before purchae it.
TTL Logic Level: 3.3V
Specification
Connectors: USB 2.0 serial TTL connector, 3.5mm jack
Chipset: FTDI 232RL
Cable length: approx 6FT
List of supported systems
1.Windows XP,7,8,10
2.Ubuntu 11.10, kernel 3.0.0-19 or above
3.Mac OS X 10.3 to 10.8 (32 &64 bit)
4.Mac OS X 10.9 and above(64 bit)
5.PC or notebook with a free USB type A port
You can download the driver directly from FTDI's website
Package Content:
1 X USB Serial RS232 to 3.5 mm Jack Cable
1 X Driver CD
WARRANTY:
We back this USB Serial TTL to 3.5 mm Jack Cable with 24 months warranty.If you meet any question, Please contact us, we will fix your issue within 24 hours.
Important Notes
This product uses FTDI FT232RL chip by default, because of the chip out of stock, some production batches use FTDI FT232RNL model chip . Please do not worry, FT232RNL is also the chip produced by FTDI, can completely replace FT232RL. If you still care about these please contact us.
ellr0m
Reviewed in Italy on March 17, 2024
Fare attenzione al pinout prima di acquistare (esiste in due varianti)
Jim C
Reviewed in the United States on December 22, 2024
Used this cable to update the firmware in my Xiegu G90. It worked perfectly.
Josue
Reviewed in the United States on May 2, 2023
Works perfect
Paul Garcia III
Reviewed in the United States on November 22, 2022
Worked perfectly for updating the firmware on my Xiegu G90.
Sten
Reviewed in Italy on April 6, 2022
PRODOTTO DI QUONA QUALITA' COSTRUTTIVA CONSEGNATO TEMPESTIVAMENTE MA NON POSSO EMETTERE UN GIUDIZIO COMPLETO PER NON AVERLO POTUTO ANCORA TESTARE.ECCO LA RAGIONE DELLE 4 STELLE
Eli Gladman
Reviewed in the United States on June 29, 2021
This isn't a product the average consumer willever need, but it's exactly what I needed. I use this for displaying serial output from an embedded system running Linux.This cable works great! So much easier than using a 5v serial cable paired with a 5v to 3.3v logic level converter.
Kindle Customer
Reviewed in the United States on July 8, 2020
Long story short, I needed a USB to AUX UART TTL serial cable to debug my Pinebook Pro (an arm-based laptop). I was a little skeptical of buying a product with no reviews, but with free returns, I figured I should at least give it a try. It came a day early, and I was pleasantly surprised at the quality of the packaging-a small, beautifully decorated box. Inside was the cable, a brief guide to downloading drivers for the cable in Windows, and a mini CD with the drivers, as well as a quality control pass card. I did not need the drivers, however, as when I plugged the cable into my Ubuntu-based system it showed right up in lsusb and worked without any special drivers. The instructions say that this cable can transmit up to 3Mbps. The cable is great and I will definitely recommend anybody in the serial adapter market buy from DSD Tech! I only wish that this cable was a little cheaper, as I feel like 12.99 is slightly overpriced.
Recommended Products
