Shopping Cart

Your cart is empty.

Your cart is empty.

ECCPP 2PCS 4 Lug 20mm Wheel Adapters 4x110 to 4x137 10x1.25 74mm with 3/4' Studs Compatible with for Foreman 450 400 500 for FourTrax 300-Only Work with 4x137 Wheels

Free shipping on orders over $29.99

$30.99

$ 15 .99 $15.99

In Stock
  • [GARAGE CHECKING]:This 3/4 inch Wheel Adapters 4x110 to 4x137 used to change the rim pattern,please verify you have 4x110 vehicle bolt pattern car,and you need to install not oem stock rims (aftermarket rims)to your vehicle hub.Enter your Year/Make/Model in system garage filter(AMAZON CONFIRMED FIT)to validate product fitment
  • [PARAMETER]:this Wheel Adapters 4x110 to 4x137 with Thickness:0.75 inch| Vehicle Bolt Pattern:4x110| Wheel Bolt Pattern:4x137| Thread Pitch:10x1.25| Hub Bore:74mm | Recommended Install Torque:63-80 N/M| Package Include:2 pcs Wheel Adapters with Thread locker glue
  • [PERFORMANCE]:(1)Increasing the extra gap between tire and vehicle hub assembly,improving the vehicle's performance in terms of handling and traction ,such as improve flexibility when turning.(2)Giving an aggressive performance to your vehicle.(3)Lowering the center of gravity,benefit for keeping stability at a h-igh speed.(4) Av-oid rubbing on the sway bar when install larger tires
  • [INSTALLATION]:Please Make sure that your Vehicle hub bolts size MUST equal to this Wheel Adapters'thread pitch 10x1.25.Requires standard tire repair tools, a torque wrench, and lug socket.Check and re-torque all hardware, including open-end lug nuts securing adapter to wheel hub after some 50-100 miles
  • [LUG BOLTS DESIGN]:While 12.9's are stronger but less ductile which is an issue in a failure scenario. Pre-installed heat treated 10.9 grade studs are more appropriate in the sense that they have higher plastic strain energy, or in simpleton terms: will tend to deform rather than snap.10.9's are more than sufficient for a car application in terms of strength and for the reasons mentioned above are more desirable than 12.9's



Product Description

wheel spacers
wheel spacers
fitments

fitments

  • 2002-2004 for Bombardier Quest 500 1999-2005 for Bombardier Traxter 500
  • 2008-2015 for Can-Am DS450 1981-1986 for Honda ATC250R
  • 1997-2004 for Honda Foreman 400 1998-2004 for Honda Foreman 450
  • 2005-2017 for Honda Foreman 500 2001-2009 for Honda Foreman Rubicon 500
  • 1988-2000 for Honda FourTrax 300 1987-1989 for Honda FourTrax Foreman 350

fit for

  • 2004-2008 for Honda Rancher 400
  • 2000-2006 for Honda Rancher 350
  • 2007-2017 for Honda Rancher 420
  • if your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation

Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:

1) Shorten the factory studs

2) The wheels need to have the open slots (cavities) between mounting holes.

3) Purchase a set of shorter studs and replace them with the factory studs.

wheel spacers
wheel spacers

Brandi Meyerson
Reviewed in the United States on September 4, 2022
Shipped quickly and I was able put aftermarket wheels on. Works great so far!
Recommended Products

$13.95

$ 6 .99 $6.99

4.3
Select Option

$8.49

$ 4 .99 $4.99

4.6
Select Option

$5.99

$ 2 .99 $2.99

4.3
Select Option