Your cart is empty.
Your cart is empty.Product Description
Detail Show
Items can be moved
- Manufactured with heavy-duty steel and aluminum profiles.
- The maximum adjustable height is 150mm.
- At the same time, the front and rear joints can be adjusted according to the different equipment you use.
- It can support the mainstream flight joystick equipment on the market.
Rotation adjustment
- High-quality steel and aluminium profiles are used for construction.
- According to personal usage habits. It can be adjusted outwards by up to 45°
- Good ergonomics. So that you have the most comfortable feel angle.
- Prepare for both when you are seated and when you leave. Plenty of legroom is reserved.
Compatible With Flight Sim Game Joystick Device
David W.
Reviewed in the United States on February 27, 2025
I mounted a virpil warbrd gimbal and winwing orion 2 throttle base to it. The holes didn't quite line up correctly with the virpil onto the place but it still managed to work while the winwing throttle uses the entire mounting arm length. These devices use the same mounting template as a thrustmaster warthog set so I suppose I'm pushing it in regards to compatibility.Mounting the arms to the chair was a nightmare to do solo but I managed by turning the chair upside down to let gravity help. You're trying to keep a steel mounting plate and your chair arm together while sandwiching a spacer all while aligning a bolt to the hole on the chair so I hope you're good at juggling. I also had to remove the foot rest from my chair as it would no longer fit with the new hardware.After getting the parts that interface directly with the chair mounted up, everything else went together as easy as any other hotas mount.One other gripe, because the horizontal arms are only just long enough for a warthog throttle, I could not attach the winwing viper plate to the throttle.
LB
Reviewed in the United States on January 15, 2025
It is an excellent fit for my Titan secret lab. However, I wish it were black; that would make my setup look better. I will also buy a collective version for Virpil with Apache grip if they sell it.I ordered this Hotas chair mount after ordering a collective chair mount from Monster Tech, and the Hotas arrived first. Monster Tech is still "processing."
andrew jamieson
Reviewed in the United Kingdom on September 26, 2024
Have been using the product for a few months now and it works just as advertised.Instructions were a bit confusing but managed to put it together fine.My setup is a pair of VKB Gladiators on a Secretlabs titan evoYou will need to buy a pair of locking screws (search for "M6 x 16mm Handle Adjustable Clamping Lever") for the swivel functionality to really work. This allows you to lock/unlock the joystick positions without an allen key. Product would be 5 star if these were included and with more clear instructions.
jason
Reviewed in Canada on August 3, 2024
Works great, a little confusing to assemble but overall not bad
James A.
Reviewed in the United States on August 18, 2024
It should be noted. Although the throttle and joystick choices are varied and installation to the mount is stable and secure. Installation of the assembly to a specified chair is NOT and it should be. I actually looked at at 20 + chairs. Most chair seat frames and armrests are different than the product description indicates. To complete the installation a universal chair mount bracket MAY be needed to complete the installation. Although Amazon had the universal chair mount bracket listed. That product should be noted and listed near the chair mount choices. Spending several hours trying to complete this project. One other item the installation of the universal bracket requires the seat cushion mount be removed to install the bracket. Amazon should deliver my bracket Monday,then I can complete the project.
thatguy
Reviewed in the United States on May 3, 2024
Solid attachment that works as advertised. X-56 mounted to a Secret Labs Titan. Assembly was easy and straight forward.
Jabari A Williams
Reviewed in the United States on December 8, 2024
The silver aluminum block was no threaded for me. resulting in wasted time and effort that came out unsuccessful. Screws are not made to measure.
scalywag
Reviewed in Canada on December 24, 2024
I was worried this'd be flimsy n not last or be compatible with my chair. Neither was the case
Gordon Baines
Reviewed in Canada on December 19, 2024
If your mechanical in your thinking..you can fit this set up on basically any chair. Although the Thrustmaster t-flight is linked by cable..restricted the length between throttle and control stick. I made it work and it adds to the game play.
Hayes
Reviewed in the United States on November 29, 2024
quality parts was missing some screws. This wont fit on a a secret labs chair the arms are too short on the mount to reach the arm rests even in the lowest position.,
Rodney
Reviewed in Australia on November 18, 2024
Every possible mounting option provided.I'll be able to upgrade from my x52 to a winwing hosas and the existing mounts will fit.
Mkel2000
Reviewed in the United States on April 19, 2024
This product is a cheaper alternative to the Monstertech HOTAS Chair Mount. Mounting plates for the chair are very similar (if not identical) to the Monstertech plates so it should fit many of the same chairs. The vertical posts are 6020 and are sturdy enough for any HOTAS system. The product comes with Universal mounting plates for throttle and stick so should fit any HOTAS system. I had no trouble attaching the Winwing Orion 2 throttle and stick. Everything is very sturdy when attached to the chair.Now for the drawbacks and the reason for just 4 stars. The included instructions are typical of any Chinese product nowadays, relying primarily on pictures to explain things. The package included lots and lots of extra (in other words useless) nuts and bolts. While the parts lists calls them out, the useless pieces are never mentioned again in the rest of the instructions. The instructions call for replacing the bolts that mount the arm to the chair with longer bolts and some spacers that are included in the product. However, only half of the necessary bolts are included; the instructions only call for 4 bolts and 8 are needed. In my installation I didn't need the spacers so I was able to reuse the original bolts. If you need spacers for your installation, then be prepared to buy 4 more M8x35 bolts.The mounts for the joystick and throttle are easily removable if you buy a set of these: https://www.amazon.com/dp/B07KPGKFSS?ref=ppx_yo2ov_dt_b_product_details&th=1. The thumbscrew knobs are something that should have been included and weren't.Overall, this is a decent alternative to the Monstertech chair mount system.
An Owner
Reviewed in the United States on April 17, 2024
I have VKB flight sticks and throttle which I use these mounts for. It had the holes I needed to mount with no issue. Mounting on my chair keeps my desk much less cluttered looking. Having the joysticks on the chair makes it look more like a specialized gaming chair. It felt sturdy once mounted. I like the fact that there are multiple points of adjustments in terms of height and distance from your seated position. You can also swivel the joysticks away to the side of the arms of the chair when you're not playing with the flight sticks. I just have to disconnect the detachable USB cables from the joystick base so they don't get in the way.
Recommended Products
$24.99
$ 10 .99 $10.99