Your cart is empty.
Your cart is empty. Applications Fields:
Smart Access Control, Locker, Scan Code Gun, Channel Gate, Station Inspection Ticket, Smart Self-Service Terminal, Supermarket, Retail Store, POS System, Cash Registers,Warehouse Management, Conference Ticketing, etc Need to Scan 2D Codes Industry Equipment.
Technical Parameters:
Voltage:5V.
Power:Communication interface:UART TTL\UART RS232\USB
Scanning Mode: Omni-directional Auto Sense Scan Mode.
Parameter setting method: sweep QR code setting parameter or host command setting.
Work tips: Buzzer can be connected, LED indicator.
Scan angle: ±60°, ±40°, ±360° (left right, front back, rotation).
Decoding type: 1D/2D:Code128,UCC/EAN-128,AIM-128,EAN-8,EAN-13, ISBN/ISSN,UPC-E,UPC-A,Interleaved 2 of 5,ITF-6,ITF-14,ITF-25,Industrial 25,Standard 25,Code 39,Codabar,Code 93,Code 11,QR Code.
Scan Distance:5 mil: 5 to 10cm (adjustable by customer needs).
Working temperature: -25°C~55°C.
Humidity: 5%~95% (Non-condensing).
Dimension: 66mm x 65mm x 26.5mm.
Package Includes:
1 x QR Bar code Scanner.
2 x Interface line
At the same time match the USB cable and UART TTL serial cable for you to choose the interface type.
If you need to know the product details, you can contact us via Amazon to send us an email.We will send you the product development materials and setup manual.
The product is developed and produced by our company.The company has professional technicians to provide after-sales technical support. Please rest assured to buy;
Thank you for your support and trust.
PlantExchange
Reviewed in the United States on July 3, 2024
I purchased this product for use in a packet filling machine. The module cooperates seamlessly with my microcontroller, only requiring four M/F wires and a few lines of code to get it working. I'm particularly impressed with the range and precision of this scanner. A *moving* packet with a printed QR code held ~1 foot from the scanner is captured perfectly every time.Another reviewer pointed out that the logic voltage (3.3V) is lower than the power voltage (5.0V). If you're using an Arduino and a 3.3V output is not available, a 5.0V output can be lowered by dividing the voltage: Arduino TX --> 1.8 kΩ resistor --> module RX & Arduino TX --> 3.3 kΩ resistor --> GND.All told, this is an excellent out-of-the-box module. There are some cheaper bar code / QR code scanners available, but all seem to require some tinkering before they work. If your sanity is worth a few extra dollars, then you're in the right place.
Customer
Reviewed in the United States on April 7, 2024
Reach out to the maker to get the programming instructions! So many features, but also works really well out of the box. I'm using it on a production line for quality control and it has been very fast and accurate. I recommend turning off the onboard light and using a LED panel light at a low angle if you have any scan reliability issues (I'm scanning a QR code through reflective plastic!)
Marty
Reviewed in the United States on February 21, 2023
The media could not be loaded.
David
Reviewed in the United States on October 6, 2023
This QR code systems works just as intended with USB. Very well put together. It comes with a cable to help you attach it to your custom circuit as well. WARNING! No where does it say that it operates on 3.3V for the logic levels on TX and RX. I used a translator, because the operating voltage specified was 5V. So I assumed the logic was also at 5V. Since this is true, I would not recommend plugging the TX line from an Arduino UNO into the RX line of the QR code reader as without more data , this could potentially damage the device. The seller of this QR code reader needs to specify that it operates at 3.3V logic with a 5V power supply to it.
MFReader
Reviewed in the United States on April 19, 2023
Description lists support of great many codes, but in reality it only supports less then half of what is claims, specifically:QR, UPCA, UPCE, EAN13, EAN8, CODE39, CODE128, CODE25.Stay away, this is very dishonest.I foolishly designed and built an enclosure for this scanner, only to find out that it is totally useless for my application.
Per
Reviewed in the United States on April 17, 2023
This device was perfect for my home automation project. I was looking for a QR code reader which is small, easy to integrate with and of decent build quality, and this device surpassed my expectations.The device has functionality to monitor its status, and restart if necessary, which is just what I was looking for.When I was building the components in my home automation project (a door control system), I emailed the seller asking for more information, and they answered quickly to my email with the correct information and supplied a guide with detailed instructions.I can recommend this product.
Hamzat Azeez
Reviewed in the United States on December 16, 2022
Tested and working
JORGE
Reviewed in the United States on April 18, 2022
The media could not be loaded.
Recommended Products
