Your cart is empty.
Your cart is empty. High performance stripper for outstanding sharpness.
Strip holes are designed to fit both single and stranded lines.
The precision polished finish creates a very round shape with a sharp edge without damaging the core line.
The main body is made of high carbon steel, so it has excellent abrasion resistance.
Environmentally friendly elastomer grip Excellent oil resistance.
For fine lines
The pin part uses a unique set pin, so it can be easily adjusted to loosen even after long periods of use.
If you use the tool for a long time, the set pins that have been attached to the shaft may loosen or become uncomfortable.
This may cause damage to the tools as well as the original performance.
If the set pin is loose and rattle, please adjust the set pins.
Wear protective glasses for safety. As the cut will scatter, please make sure there are no people or fragile items around the area before working.
Do not use for cutting hard materials, piano wires, etc.
Do not tighten the bolts and nuts on both ends to adjust the gap.
This may cause the set pin to be damaged.
Do not apply excessive torque when tightening.
This may cause damage. (Tightening torque = less than 2N/m)
Product Size: 2.0 x 6.9 inches (50 x 175
Weight: 4.6 oz (134 g).
The specifications of the rivet part will change once the current product is out of stock.
JS
Reviewed in the United States on March 2, 2025
It is hard to find a wire stripper that can handle the small gauge wire. This tool works great!
R. Davis
Reviewed in the United States on February 16, 2025
Very nice quality. Strips 30 gauge wire perfectly without nicking it.
Billy Webb
Reviewed in the United States on February 15, 2025
The best strippers for guitar work!Not a single strand broken when using these
AllTogetherNow
Reviewed in the United States on January 9, 2025
i bought those fine knipex and other ones that were twice the cost...they sucked compared to this. you want super get a machine, you want something that gets the job done quickly, with spring action get this one.
Anonymous
Reviewed in Canada on July 10, 2024
Very sharp, very accurate sizing, makes stripping tiny wires a breeze
Ray O
Reviewed in the United States on June 13, 2024
As a long time model railroader, I have had a lot of problems stripping small gauge wires. My best wire stripper will only handle wires to 22 gauge. The Engineer PA-14 handles wire gauges in the low 30 gauge range. While more expensive than other wire strippers, this tool is well worth the money. I found it well made and definitely gets the job done.
John P. Norman
Reviewed in the United States on December 20, 2024
These are very precise and high quality. A pleasure to use.
Chris Nas
Reviewed in Japan on October 29, 2024
このワイヤーストリッパーには大満足です。とても精密で、必要なサイズがすべて揃っているので、どんなワイヤーにも対応できます。使いやすく、作業がスムーズに進むので、作業効率もアップしました。期待を超える品質で、本当に感謝しています。ワイヤー加工に欠かせないツールをお探しの方に、心からおすすめしたい製品です！
Isik's Tech
Reviewed in the United States on July 22, 2023
I really like these wire strippers for thin wires. Strips wires very easily and cleanly, including PTFE/FEP wires. My Klein Tools wire stripper really struggles with those. It also has a lock to keep it closed when not in use, which is nice too.My only nitpick is the spring, I think it is too long and opens the handles too much in my opinion.
imready663
Reviewed in the United States on May 14, 2023
I purchased these strippers with a specific purpose in mind, rewireing audio tonearm. These use 32-34 awg wire to bring the signal from the cartridge to the phono preamplifier. The wire must be small enough to not inhibit the tonearm and cartridge from tracking the record as intended. I use generally milspec 34 awg wire, as the specs are generally higher than many arms are equiped with. The number of strands in this small guage wire I use vary from 7-17 to make up the 34awg wire guage. It's extremely mportant to leave all strands fully intact to achieve the desired results. Though I haven't wired a tonearm yet using these, I have stripped a couple different wires that I have and they cleanly removed the insulation with any damage that I can see. All othe strippers I have purchased,Klien , blue point and others are not built with the precision of these strippers. I'm thrilled and have, of and on tried to find this quality and price for the last 20 years. Well worth the asking price and I am daunted by working with small guage anymore. Thank you for making these available, maybe I clean off the work bench a get to work today!
Michele M.
Reviewed in Italy on April 8, 2019
Ottima pinza adatta a spelare i fili più sottili. Molto precisa e di fabbricazione eccellente. Funziona molto bene. Sono soddisfatto. La consiglio.
WL
Reviewed in Germany on May 29, 2017
Ich bin von der Abisolierzange von Eigineer total begeistert, wie übrigens auch von allen anderen Engineer Zangen, die ich bis jetzt gekauft habe (eine fantastische Crimpzange und eine kleine Kombinationszange).Ich hab zuhause nur Knipex, Wera, Wiha und Co. Werkzeug - also deutsches Qualitätswerkzeug. Aber die japanische Marke Engineer steht den Deutschen meiner Meinung nach nicht nach.Ich habe auch die beiden Wiha Electronic Abisolierzangen Z49218003 AWG 10 - 20 und AWG 16 - 26 (die anscheinend die gleiche Modellnummer haben). Ich verwende aber auch oft Draht Die Engineer Abisolierzange geht von AWG 22 - 34, 0,95 - 0,25 mm. Aber damit geht auch der von mir sehr oft zur Signalleitungs-Verlegung oder für SMD-Led Anschlüsse verwendete "AWG 36 Teflon Coated Wire" vom berühmten Chinesischen Modellbauladen perfekt abzuisolieren! Dieser Draht war immer etwas fizzelig, ich isolierte ihn normal mit einem Skalpell ab, was aber oft Probleme verursachte. Mit der Engineer Abisolierzange geht dieser Draht nun perfekt, einfach und schnell abzuisolieren - super!Die Verarbeitungsqualität der Engineer Abisolierzange steht IMO über der Qualität der beiden Wiha Electronic Abisolierzangen. Zumindest ist das Finish deutlich schöner. Die Zange liegt super in der Hand, hat einen Verriegelungshebel, um geschlossen zu bleiben, und die Öffnungsfeder hat genau die richtige Stärke - nicht zu schwach, nicht zu fest.Das Abisolieren geht perfekt - die Klingen sind scharf, alles ist gerade, absolut problemlos.Ein Top Produkt!Schwere Kaufempfehlung für Leute, die viel mit sehr dünnen Drähten arbeiten.
dveras
Reviewed in Spain on December 8, 2017
El pelacables hace su función. Pero no veo que deba costar esa exageración. Siempre que se use con moderación y no para un uso intensivo.
Recommended Products
