Your cart is empty.
Your cart is empty.Product Description
- Compatible with Only EPEVER Controllers: Tracer-AN,Tracer-BN, Triron-N, XTRA, LS-B(P), VS-BN, eTracer, iTracer, Tracer-BPL. Please be noted that this MT-50 remote meter dose not work with Other brand controller.
- Automatic identify and display the type, model and relevant parameter data of controllers
- Real-time display the operational data and working status of the connection devices in digital, graphic and textual forms by a large-screen multifunction LCD
- Direct, convenient and rapid operation of six navigation function keys
- Both data and power flowing on the same lead, no need for external power
- Real-time data monitoring and remote load switchover of the controllers, and data browse and modification of device parameters, charge control parameters and load control parameters
- Real-time display and acoustic alarm of failure information of the connection devices
- Longer communication distance based on RS485
Technical Data:
- Faceplate dimension:98×98 mm / 3.86×3.86 inch
- Frame dimension:114×114 mm / 4.49×4.49 inch
- Connector type: RJ45
- Meter cable:Standard 2m,Max 50m
- Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F
Functions like the real-time monitoring of the operational data and working status of a controller, the browse and modification of charge/discharge control parameters, the setting of device parameters and load control parameters and the restoration of factory defaults, based on LCD display and functional key operation.
imatkel
Reviewed in the United States on February 4, 2025
Bought this solar charge controller to replace an older PWM controller that was originally sold on ebay as a MPPT. Another case of lies in advertising on the old one..EPever has a very good name when it comes to solar charge controllers and this new one has more bells and whistles then I need but it is MPPT and works very well. I researched the crap out of charge controllers before I settled on this one. My system is not that big just 2 - 100watt panels on the roof of my van and 2 100AH sealed batteries. The reason I upgraded the charger is because my batteries are old and lack power so I will upgrade to a 100AH LifeP04 battery and I wanted a controller that would be best for that. It took a while to figure the functions of this charger but now that I have it for a while I am very happy with it and can recommend this charger.
Frederick O Couch Jr
Reviewed in the United States on January 5, 2025
Exactly what I needed for my lithium battery solar set up
Debbs
Reviewed in the United States on August 30, 2024
Love this Controller. I Love that it reads the wattage you’re getting. Some don’t do that. Also it has 3 readings on the screen at once, you don’t have to scroll through each individually. It's easy at a glance. you don’t have to touch anything to know your panels are preforming. I also like the USB’s. I installed it on my boat, so having those extra USB’s without drilling holes and putting in cigarette lighters for more charging ports was a big bonus. Setup was easy. I went with a 30amp for my 200W panel as I want to add another 100 in the future. I ran it with a 40amp maxi fuse. It’s all working great.
Robert Starks
Reviewed in the United States on August 21, 2024
8/20/34I should receive this on 8/21/24. My main complaint is o had to contact the manufacturer about the ebox wifi module. They say it's an old version that is not available anymore. The seller needs to update a picture then. It is very misleading and had me doing unneeded searching for something that no longer exists. Do better and fix this mess.11-2-24 I now have two of these solar charge controllers. I still have problems with the kWh history getting lost after a month or two. 50.82 kWh for October. Then today only 2.32 kWh showing for the newest one only. How do I add back lost kWh history? It has been deleted off the first one. Anyone else have this problem?
Mike A.
Reviewed in the United States on July 8, 2024
Best way to link to the controller. I could use my laptop, but it’s so much simpler to use the remote meter.Very much recommend.
Happy Kat
Reviewed in the United States on July 12, 2024
Installed easily and works great.
Richard H.
Reviewed in the United States on June 21, 2024
The small 20 watt Epever controller that a previous RV owner installed had to have this matching panel added to the system to work with different battery types. It’s identical to a “MT50” unit marketed by Renogy and would be best if packaged with every controller sold under either Chinese brand name.
Ian
Reviewed in Canada on November 13, 2024
I connected a raspberry pi -- powered from the usb port and can pull stats from the serial port. Works really well
Don Lucius
Reviewed in the United States on March 31, 2022
Working great, however, can not find a thermometer probe for it. Ordered the one it calls for, that company, not affiliated with this one, sent the wrong item. After many emails, finally got it resolved through PayPal. Got a refund, never got the probe. So, if you need the probe buy a controller that provides the probe with it. That's my only fault with this controller, should have had the probe with it.
Tony
Reviewed in Canada on November 27, 2022
Using in conjunction with my EPEver solar charge controller. Works very well. Very happy with my purchase.
Karine Bélisle
Reviewed in Canada on July 23, 2021
Très bon rapport qualité prix
User
Reviewed in Canada on July 20, 2020
I have installed EPEVER 20A MPPT Solar Charge Controller with 2 low priced panels connected in series. Works well in lower light and overcast making the best use of daylight hours. One oddity when light is low but very little charging taking place. Controller indicates that input is over voltage but this is defiantly not the case. I have been working with support but having difficulty in reproducing the condition. Support has been quite helpful.
Robert S.
Reviewed in Canada on July 19, 2020
Recommend adding external monitoring like a MT50
Recommended Products