Your cart is empty.
Your cart is empty. FEICHAO FS2A-4CH AFHDS 2A Mini Compatible Receiver PWM Output for Flysky i6 i6X i6S
Description:
Item name: FS2A 4CH Receiver
Channels: 4CH
Output signal: PWM
Frequency range: 2.408-2.475GHZ
Band width: 135
Receiver sensitivity: -92DBM
2.4G mode: AFHDS 2A
Failfe: Yes
Supply voltage: 3.3-10V
Distance: 400+ meters
Working current: 20MA
Dimensions: 11 * 25MM
Weight: 0.9 grams
Support: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other AFHDS 2A protocol transmitter
Bind:
1. Press and hold the key on the receiver and connect the power to the receiver. The blue light on the receiver flashing, get into bindind mode.
2, Set the transmitter into bind mode (confirmed AFHDS 2A protocol). After getting into bind mode, the receiver light changes from flashing to slow flash.
3, Transmitter get out of bind mode, then the receiver blue light becomes bright. Indicates that the signal receive is successful.
Failsafe settings:
The receiver can normally receive the transmitter signal, push the rocker to the the failsafe set, long press the receiver bind button, the blue light flashes quickly several times and then always bright , failsafe settings is successful.
BrotherWheels
Reviewed in the United States on January 13, 2025
Installed in an SCX24. Easy to solder. Quick to bind to FS-GT5 transmitter. I like that it came with a piece of clear shrink wrap. Couldn't be happier.
Same flyer different airspace
Reviewed in the United States on July 25, 2024
solder 4 corners first then cut pinsuse FLUX OR RUIN IT JUST USE FLUX VERY SMALL AREA
Carlos Sesto Jr.
Reviewed in the United States on May 29, 2024
We have used this for several combat robots and have been very happy with the performance. We have run with 3s and 4s battery and the repeat dual esc and Flycolor fairy without issues. In a sport/hobby where weight is really important having a 1 gram receiver in a small form factor is great. We recommend heat shrinking your connections once you finish soldering.
Alan Hill
Reviewed in Germany on February 3, 2024
Ich bin wirklich erstaunt, dass dieser winzige und sehr günstige Empfänger so gut funktioniert. Man sollte sich auf jeden Fall die Anleitung für das Binden und den Failsafe in der Beschreibung durchlesen und ggf. abspeichern. Es liegt keine Anleitung bei, ist aber auch nicht nötig.Mit einer kompatiblen Fernsteuerung wie der Absima CR4T Ultimate ist der Empfänger sehr schnell gebunden und funktioniert einwandfrei.Perfekt für kleinere Fahrzeuge, Boote oder jeden anderen Anwendungsfall mit bis zu 4 Kanälen. Bei Flugzeugen und Hubschraubern kommt man ggf. auch noch damit hin.Wichtig: Man muss entweder die Kabel direkt an die Platine löten oder den mitgelieferten Stecker verlöten. Ohne Lötkolben kann man ihn also nicht verwenden und für Laien ist er nicht geeignet.
eck marie claude
Reviewed in France on July 2, 2023
Envoi rapide et conforme à la description
Cliente
Reviewed in Italy on February 20, 2023
Ottimo
Stone
Reviewed in the United States on November 17, 2023
I've purchased several of these for different RC conversions. This model (small chip on the bottom) works immediately and without issues.Do NOT get the version with the large chip on the bottom.
stieg
Reviewed in the United States on October 16, 2023
I like the range, which is very good for the Feather Squared 50 gram DLG I placed it in. It is the size of a micro SD card and weighs about the same without wiring. Paired instantly and reliably to a Radiomaster 16S.
Luckless Pedestrian
Reviewed in the United States on July 28, 2022
Deducted one star because these devices come with absolutely no documentation. I just bought two of these. When I first tried them on the bench I could not get them to bind with my FLYSKY i6... No instructions were included, so all I had was the description in the Amazon listing, which did not work. I searched on line and found a YouTube video that detailed the process. The step that was missing was a final transmitter power cycle. All is fine now, and they appear to function fine.
M
Reviewed in the United States on March 31, 2022
This showed up in the mail - see pic. Obviously damaged antenna, badly executed solder on the pads. What the heck??Update: return it to Amazon for replacement. The replacement came with no damage or rubbish rework. Device works exactly the way I wanted it to, and is obviously very lightweight and low cost.
Kristian M.
Reviewed in Sweden on November 26, 2022
Worked perfectly. Binds to any ahdsf2a transmitter with the press of a button. I didnt solder up the pins but soldered servos and esc directly to get it as light as possible for a indoor plane.
Randy Marsh
Reviewed in the United States on November 10, 2022
Binds up good with the multi module set to the AFHDS 2A mode option set to PPM/IBUS. Have yet to range test but nice little receiver. Wish it came with a bit of heat shrink to cover it after soldering the pin header on
alex
Reviewed in Canada on April 18, 2022
Good jobLivraison et qualité très bonne !
Recommended Products
