Your cart is empty.
Your cart is empty. Premium FERRODAY Mini Keg Charger 0-60 psi Keg CO2 Regulator - Unique Design & Exquisite Craft!
Mini keg regulator’s Advantages:
This mini keg regulator created a new way of lightly mobile beverage carbonation and dispensing! Created a tabletop dispensing style at
home, bars or breweries with fresh beer! Also great for camping, fishing, tailgating, and other holiday events. 0-60 PSI regulator has a
broader range of pressure control than the 30 psi version. Serving your homebrew beer, cold brew coffee, soda water, iced tea and other drinks at proper pressure anywhere.
Step by step instruction:
1: Connect the regulator and the ball lock disconnector(white) with the adapter;
2: Then attach the regulator kit onto the keg by ball lock disconnect;
3: Make sure the regulator is off before use;
4: Screw a CO2 cartridge onto the regulator’s bottom;
5: Rotate the knob slowly until gets your desired pressure;
6: Most used pressure for dispensing is 5psi, and please be aware that pressure above 10psi could be dangerous for glass containers.
* Beverage food-grade CO2 cartridges only!
Note:
Please adjust the pressure slowly to prevent damages caused by suddenly rising pressure;
Please place the regulator at a safe place, be careful of the bump;
Not recommended for nitrogen.
Package Includes:
1* 60psi Mini Keg Regulator
1* Ball Lock Gas Disconnect
1* Installation Wrench
Alex Alonzo
Reviewed in the United States on March 6, 2025
Works well, decent alternative to the expensive name brand mini regs. Just make sure to order the correct thread sizing on your C02 cartridges
P. McBride
Reviewed in the United States on September 15, 2024
There’s no way to tell if the valve is open or closed. There are no “clicks” to tell you how far the valve is opened., and no indexing marks to tell you this eitherBut that is minor, the thing leaks CO2 like a sieve. You’ll have an empty CO2 cylinder even if you shut he valve tight.
David L. Dallas
Reviewed in the United States on June 27, 2024
The quality looks good but the set pressure does not hold. When I set the serving pressure to 10psi it drifts up to 60 (max) within an hour. Constantly having to burp the pressure back down to 10psi. This is causing over carbonation of my beer. I would not recommend.
Brad Strong
Reviewed in the United States on June 26, 2024
This is the perfect addition to keep my keg carbonated on the road. I do not use it to carbonate my beverages. I only use it to keep the carbonation while traveling.
Tyler
Reviewed in the United States on November 4, 2024
Failed on first use
Calvin R.
Reviewed in the United States on October 13, 2024
Best threaded regulator I have used. I have been through a few other brands and those have been nothing but a waste of time and money. They either only work for a short bit, need modifications, or just do not work at all.This one does not leak, it's easy to operate (no forcing carts to fit, fiddling w/ Teflon, or fighting the control valve), and has been several dozen carts. Excellent quality for the price.
Brandon
Reviewed in the United States on August 29, 2023
Each CO2 cartridge seems to be enough to serve about 2.5 gallons of an already carbonated beer. I made sure the keg already had about 12psi of head pressure on top of the pre-carbed beer. I then followed the instructions by decreasing the flow on this CO2 unit all the way to the minimum, attaching a food grade CO2 cartridge and then slowly opening the flow to the point it would maintain 10-12 PSI.
Matt M
Reviewed in the United States on February 23, 2023
Wanted to play with carbonation of some assorted drinks...this seemed the lowest cost way to get into it enough and see if I like it before investing heavily in a tank and fancy regulator.While it says 60PSI the gauge maxes out at 60 and pressure never seems to go above about 50PSI, so be aware if you care about that. I thought it would output 60PSI. But I'm new at this so I don't know if that matters much.I was happy to see it seems like it doesn't just vent uncontrolled when the quick-release is not connected to anything. I did initially overlook the wrench to tighten the adapter fitting into the regulator and had difficulty assembling it until I realized I needed that to get the fitting properly tightened down to be leak-free on the output.We shall see how long these little cartridges last. I don't expect they will last long but it sure is the most portable design I've seen and quite cost-effective for just a quick tinkering or rare/travel use, but if you use it regularly would be expensive buying the little cartridges.
Recommended Products
$18.99
$ 8 .99 $8.99