Your cart is empty.
Your cart is empty. Specification:
Weight: 156g
Motor size: 35 x 48mm
Shaft size: 5.0 x 65.5mm
Motor mount: 16 x 19mm (M3*4)
No.of Cells(Lipo): 3-5S
Recommended ESC:70A
Working temperature range: -0℃~+80℃
Control method: use ESC and adjust PWM signal for control, PWM adjustment range 900-2100US
D3548-1100KV:
Max pull: 2150g
Volts: DC11.1~18.5V
Suggested ESC: 40A
Maximum power: 911W
Suggested prop: 12inch prop
D3548-900KV:
Max pull: 1780g
Volts: DC11.1~18.5V
Suggested ESC: 40A
Maximum power: 770W
Suggested prop: 11inch prop
D3548-790KV:
Max pull: 1650g
Volts: DC11.1~18.5V
Suggested ESC: 40A
Maximum power: 717W
Suggested prop: 12inch prop
BG
Reviewed in the United States on March 9, 2025
I’m using it for a wind tunnel, works really well, great price. I didn’t use it with a battery, but I would assume it works well with it too.
Stephen S.
Reviewed in the United States on September 19, 2024
Used this on my RC rescue retrieve boat and it really works well doing the job.
Customer
Reviewed in the United States on August 30, 2024
Strong smooth motor
Lew Waidrop
Reviewed in the United States on June 14, 2024
Well made, close tolerance bearings. Smooth and powerful.
Carson Natter
Reviewed in the United States on March 25, 2024
Man I've had a lot of problems with these motors. The first one I bought worked fine. Produced good power, and ran smoothly. However the other two (one of them 3548 1100KV, one 3548 900KV) I've had nothing but problems with....The 1100KV motor out of the box made a grinding sound and sparks shot everywhere when testing the direction with the ESC prior to install. So out of the box something was severely wrong.The 900KV everything tested fine without a prop. I got it installed, got to the field for the maiden flight. Applied takeoff power, and the prop and the stator departed the front of the plane at about mach 5. Turns out this motor didn't have the C clip holding the propeller shaft and stator in place, so there is another return I need to make.I purchased both of these motors new, and was running the recommended propeller and ESC size per the manual.
Daniel detweiler
Reviewed in the United States on October 28, 2024
On time and work perfectly thanks
clint
Reviewed in the United Kingdom on September 12, 2023
A very nice motor,nice and smooth,weight is not to bad,but I bought for a big motor to help with balance.
jerry kitchin
Reviewed in the United States on July 19, 2022
Great motor i have 6 uf them no issues at all
Brian N Tooms
Reviewed in Canada on November 1, 2022
I used this motor on a pool noodle airboat for rescuing rc race boats.4s and a 13x4 prop.
Blueblaze
Reviewed in the United States on April 12, 2022
It's the same size and weighs exactly the same as the Eflite Power-15 motor that comes on Horizon's "Apprentice" RC trainer (which is by far the most popular trainer on the market). It's also quieter and smoother. It's a little more powerful at 900kv (instead of 840kv), which will stress the 30a ESC in your Apprentice, unless you limit the throttle to 90%, but that's hardly a problem.The only reason I held back a star is that it has a weird motor mount pattern and the prop adapter shaft is too short to use the spinner. But two of the motor mount holes are right and you can use a file to enlarge the other two holes in the Apprentice motor mount to work. You can use the screws from your old motor, and add a washer to the two screws on the wallowed-out holes. But be careful that the screws aren't so long that they pinch the wires below. It's easy to tell-- you can see them through the case. Add washers as necessary. As for the spinner -- for $60, I can do without!Short version -- great motor, great price, free shipping!
Spiros K.
Reviewed in Australia on November 20, 2021
No dislikes, great motor plenty of power ,it got a long can size with good torque curve
Recommended Products
$49.99
$ 26 .99 $26.99
$22.99
$ 11 .99 $11.99
$46.99
$ 22 .99 $22.99