Shopping Cart

Your cart is empty.

Your cart is empty.

FZONE 4 L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for 600-800g Raw Material

Free shipping on orders over $29.99

$134.99

$ 66 .99 $66.99

In Stock
  • Professional DIY Kit: a complete system in 4L size bottle, that includes SUS304 stainless bottle, regulator, precision needle valve, and easy adjustable bubble counter
  • Safe: the bottle body is made of 1.5mm thick SUS304 stainless steel (25% thicker than normal 1.2mm bottle); it can sustain pressure up to 80kg/cm2(or 1137 PSI); safety valve will open automatically when the inside pressure exceeds the safety threshold
  • Needle Valve with Bubble Counter: high precision, aquarium specific needle valve provides accurate fine-tuning; steady 1 bps is achievable; bubble counter with check valve built-in; it stops water from back flowing into your CO2 tank (protects your CO2 tanks from rust and corrosion)
  • 12V DC Instead of AC Power: having the solenoid on a timer( not included), you can specify when you want CO2 injection on and for how long
  • Attentions: the required powders to generate CO2 gas are not included; you will need purchase the citric acid and sodium bicarbonate powders separately. Fzone will offer a round-the-clock service, and you can reach out to us at any time for any product-related concerns.



Product Description

co2 generator kit

INSTRUCTIONS

  1. Mix 600-800 gram citric acid and 600-800 gram sodium bicarbonate inside the bottle
  2. Add 900-1200ml tap water to the bottle and cap the bottle with the enclosed regulator quickly
  3. While the CO2 gas is produced slowly inside the bottle, adjust the needle valve accordingly. It takes approximately 45 minutes for the bubbles to stabilize after each needle valve adjustment
  4. If the solenoid is purchased, remove the bubble counter from the regulator (do NOT unscrew the regulator) and attach the solenoid to it. Connect the power cord to the electrical outlet. As gas is continued to generate inside the bottle, adjust the needle valve to the desired bubble count

Q: Is the bottle body strong enough under the pressure? What are the specific parameters?

A: Yes. The bottle is completely safe. The bottle has a safety valve built-in. It will open automatically when the inside pressure exceeds the threshold

co2 regulator

Ideal DIY aquatic co2 system with profesional co2 tubing ,glass diffuser

CO2 generator is based on the principle reaction of citric acid and sodium bicarbonate mix with water, high purity of carbon dioxide gas is produced. After fully reaction, the CO2 goes through a pressure regulator, bubble counter and diffuser, provide a stable output pressure and flowrate, supply CO2 for photosynthesis, completely solve the disadvantages of the reactive generator pressure instability.

Fzone‘s CO2 generator kits included almost all stuffes needed in auqatic co2 system.

  1. 8ft professional PU tubing(NOT normal silica gel material) with fixing suction cups, super clear.
  2. glass diffuser with U shape connector.
  3. funnel and measuring cup make it easy for you to replace the raw materials

Dual gauge regulator together with safety valve, bubble counter

Precision needle valve. The CO2 flowrate allowing to go as slow as 1 bubble per 5 seconds with our high precision needle valve.

Safety valve, will open automatically when the pressure is higher than the allowed threshold.

Bubble Counter, you can read your CO2 flow rate directly on the bubble counter cylinder. Bubble counter with check valve built-in to stop water from back-flowing to CO2 tank.

Pressure indicator, indicates when it’s time to refill raw materials.

co2 regulator

OTS Mini DC 12V Solenoid Valve

●OTS 12V DC mini solenoid valve, safer than AC solenoid.

● Energy-saving - low power consumption: 0.4 watt only. keeps the solenoid cool to the touch during operation.

● Use with a timer, solenoid valve allows for CO2 to be switched on/off at defined times, e.g. to synchronize with the aquarium lighting.

● Red LED on/off indicator - the operation (on / off) of the solenoid valve can be confirmed by the red LED.

● No noise - without buzzing or humming sound.

● High-quality model - OST brand, special structure for long-lasting durability and dependability.

Upgraded bottle height and diameter rate, solid material used

  • Bottle height upgraded to 16inch (2inch higher than the 2L generator bottle), avoiding the overflow efficiently before the regulator screw in which is caused by the reactor of the citric acid and sodium bicarbonate.
  • The bottle is made of 1.5mm of SUS304 stainless steel (25% thicker than the regular 1.2mm bottle) and can sustain a pressure of 1137 PSI.

Attention:

  • Adding excessive raw materials and water is prohibited.
  • It is forbidden to invert the bottle. Stronger acid and alkali raw materials are prohibited.
  • When using this product for the first time, there will be large bubbles in the diffuser, which will gradually disappear within 2-3 days.

What is in package

  • 4L SUS304 stainless steel generator bottle
  • OTS mini solenoid
  • 8 ft PU CO2 proof tubing (with suction cups)
  • Regulator
  • Diffuser set (with U connector)
  • Power adapter
  • Funnel and Measuring cup

Jonathan
Reviewed in the United States on February 9, 2025
I've had this about 4 months now and works flawlessly. The directions are terrible so one star off but I watched a video that was terrific on setting this up. This is the perfect recipe for this 4 liter system. 600 gm citric acid, 786 gm baking soda, and 900 ml of water. This lasted about 2 months on a 55 gallon 2 bubbles per sec. It was easy to refill and I love the fact that it has a gauge and a regulator to drop the pressure to a steady 10lb per sq in.
Customer
Reviewed in the United States on February 15, 2025
The Fzone C02 generator is a very high quality system to produce C02 for your aquarium. It uses Citric Acid and Baking Soda to produce C02, which is both safer and cheaper than having to fill canisters with C02 gas. It comes with all the equipment you need to get started and works flawlessly. You can't go wrong if you have a planted aquarium. Your plants will thank you. Not only is this an outstanding product but their customer service is outstanding as well and they're ready and willing to help if you should need it. I highly recommend this product.
Adi Wolff
Reviewed in Canada on January 22, 2025
I recently invested in FZone’s CO2 Generator System, and I must say, I am thoroughly impressed! The setup process was straightforward, and the system is incredibly efficient. It delivers consistent, high-quality CO2 output, which has noticeably improved my plants’ growth. Since using this generator, I’ve seen healthier, more vibrant plants with stronger yields.The design of the system is user-friendly, with clear instructions and easy-to-understand controls. It also operates quietly and doesn’t require constant maintenance, which is a huge plus for me. The build quality feels solid, and I can tell that FZone has put a lot of thought into creating a durable, reliable product.I also appreciate the energy efficiency of the unit. It doesn’t consume excessive power, making it a cost-effective solution in the long run. Whether you’re a hobbyist or a professional grower, I highly recommend FZone’s CO2 Generator System for anyone looking to boost their plants’ growth and maximize their yields. Truly an excellent investment!
Jeff W
Reviewed in the United States on July 12, 2024
The media could not be loaded.
Ali
Reviewed in the United States on October 8, 2024
Fzone has fantastic customer support (thank you Cheryl). I was missing the white piece on my filter and they sent me a new filter. I have used an fzone regulator on a paintball tank previously, but I had a stroke, and it's no longer possible for me to go get CO2. Therefore, I looked for a CO2 generator and was happy to find that fzone had this oneBecause of my previous familiarity with using CO2, despite the horrible instructions, it was quite easy to get set up and get started.This unit came with a solenoid which works perfectly. I have it on a timer to turn on in the morning and shut off at night. I replaced the diffuser with one from clscea (stainless steel, widen hook 25cm) which works much better, especially for rimmed tanks. The supplied funnel's base is too narrow to be of real use (fzone please replace this).This unit no leaks, it's looks great, runs quietly, gives me great value for money, and I have to trim my stem plants more often now and my plants look fantasticFzone makes great products and I will buy from them again.
Domenico
Reviewed in Italy on October 7, 2024
Recensione Generatore di CO2 per AcquarioHo recentemente installato questo generatore di CO2 nel mio acquario dolce densamente piantumato e ne sono estremamente soddisfatto. Il sistema, basato sulla reazione chimica tra bicarbonato, acido citrico e acqua, si è rivelato efficiente ed economico.La bombola da 2,5 litri, una volta riempita, garantisce un'autonomia davvero notevole. La valvola a spillo permette una regolazione precisa del rilascio di CO2, consentendo di adattare il flusso alle esigenze delle piante e alle dimensioni dell'acquario.La presenza dell'elettrovalvola è un valore aggiunto. Collegandola ad un timer, è possibile programmare con precisione gli orari di erogazione della CO2, ottimizzando così la crescita delle piante e riducendo gli sprechi.Vantaggi:Efficienza: La reazione chimica garantisce una produzione costante di CO2.Economicità: La bombola da 2,5 litri offre una lunga autonomia, riducendo i costi a lungo termine.Precisione: La valvola a spillo permette una regolazione fine del flusso di CO2.Flessibilità: L'elettrovalvola consente di programmare gli orari di erogazione.Sicurezza: Il sistema è sicuro e affidabile.Assistenza clienti: Il servizio clienti si è dimostrato celere, gentile, efficiente, preparato e sempre disponibile a fornire supporto.Conclusioni:Questo generatore di CO2 rappresenta un'ottima soluzione per gli acquari piantumati. La sua semplicità d'uso, l'efficienza, la flessibilità e l'assistenza clienti di alto livello lo rendono un prodotto altamente consigliato. Se cercate un sistema di fertilizzazione a CO2 affidabile e conveniente, non potete sbagliare.
Mike Drillen
Reviewed in Germany on January 31, 2024
Ich bin sehr zufrieden mit diesen System , ich besitze mittlerweile 2 davon und kann nur sagen ich bin sehr zufrieden .Es hält bei einem Aquarium mit 60x45x30 bei mir mit 8 std Laufzeit pro Tag knapp 3 Monate . Das Auffüllen , also kurz reinigen dann Natron und Citronensäure nachfüllen Wasser drauf und fertig .ich sage mal grob 7 Euro für 3 Monate Laufzeit kostet es mich . Bei einen der beiden Systeme gab es einmal in Problem , dieses wurde nach kurzer Rücksprache mit den Verkäufer innerhalb von 3 Tagen gelöst . Absolut Top .
プラチナロッズ
Reviewed in Japan on October 5, 2023
今まではボンベを買って月に一本のペースで交換してましたが今回初めの化学式ボンベを購入しました重曹とクエン酸(別売り)があれば水を入れて その日の内に添加可能で いい買い物をしました。逆流防止弁とタイマーを別で購入して設置したので ライト エアレーション co2 のオン オフが自動化したので 朝のエサやりと週一の水換えのみなので すごく楽になりました!設置初日なので星4にしときます!
RR
Reviewed in Germany on January 19, 2023
Ich habe mir das Gerät gekauft, um langfristig eine konventionelle CO2-Anlage zu ersetzen und die teuren Flaschenfüllungen und TÜV-Termine zu umgehen. Dazu habe ich gerechnet: Eine Füllung der FZone mit Natriumbicarbonat und Zitronensäure kostet etwa 2,50 Euro (beim Kauf der „Zutaten“ als Sackware und Verwendung in der 4-Liter-Version der FZone). Also auch noch in je einen 25 kg-Sack Natron und Zitronensäurepulver investiert … na ja, kann man ja auch sonst noch gut im Haushalt gebrauchen, das relativiert die hohe Anfangsinvestition etwas.Zum Gerät selber: Die Lieferung erfolgte vor dem angekündigten Termin, die Verpackung ist ordentlich und besteht fast ausschließlich aus Karton (Kunststoff wurde so gut es geht vermieden).Die Verarbeitung wirkt hochwertig und stabil. Das Ding kann man sich auch im Wohnzimmer neben das Aquarium stellen, wenn es z.B. nicht in den Unterschrank passt - mit Blasenzähler, Relais für die Nachtabschaltung und nach oben weggeführtem CO2-Schlauch baut das eher hoch.Das Netzteil für die Nachtabschaltung muss mit einem beiliegenden Adapter an kontinentaleuropäische Steckdosen angepasst werden - auch das geht einwandfrei.An der Nachtabschaltung befindet sich eine rote LED, die leuchtet, wenn die Anlage in Betrieb ist (das Relais angezogen hat). Das ist praktisch und sieht „stylisch“ aus - eine grüne LED (grün = „läuft“) hätte das Ganze noch getoppt.Die Angaben zur Menge von Natron und Zitronensäure sind in der beiliegenden Anleitung und auf dem Flaschenaufkleber unterschiedlich (aber auf Deutsch ;)). Ich habe den Mittelwert genommen und jeweils 700 g eingefüllt. Mit einer Küchenwaage und dem beiliegenden Messbecher ist das einfach. Da es sich bei beiden Substanzen auch um ungiftige „Hausmittel“ handelt, macht es nichts aus, wenn ein paar Krümel danebengehen.Es wird darauf hingewiesen, dass die Flasche nach dem Einfüllen des Wassers schnell verschlossen werden sollte. Ich habe deshalb mit einer starken Reaktion gerechnet, aber die Zeit reicht locker, um den Verschluss sauber aufzuschrauben.Die chemische Reaktion führt dazu, dass sich am Anfang bis zur Füllhöhe außen an der Flasche Kondenswasser bildet.Der Druck baut sich dann langsam auf, nach zwei bis drei Tagen sind trotz laufendem Betrieb 420 PSI erreicht (ca. 30 bar). Es vergehen etwa 12 Stunden, bis der Druck so groß ist, dass die Anlage läuft. Das alles lässt sich an den montierten Manometern gut ablesen. Mit der Druckangabe in PSI werde ich nicht warm, aber das ist Jammern auf hohem Niveau.Die Anzahl der CO2- Blasen, die ausströmen, kann sehr gut am Blasenzähler abgelesen werden. Die Regulierung ist sehr feinfühlig möglich und reagiert direkt, das kenne ich von meiner herkömmlichen Anlage anders.Die Nachtabschaltung funktioniert einwandfrei und dichtet komplett ab. Nachströmendes CO2 oder ähnliche Funktionsstörungen hat meine Anlage nicht.Also: Wer seinen CO2-Dünger fürs Aquarium selber herstellen möchte, eine hochwertig gemachte und einwandfrei und stabil laufende Anlage sucht und die zugegebenermaßen hohe Anfangsinvestition nicht scheut, kann hier zuschlagen. Man muss sich im Klaren sein, dass der Wechsel der „Zutaten“ Arbeit bedeutet (dieser Schritt hat bei mir 15 Minuten gedauert) und sich das Ganze nur auf lange Sicht rechnet.Erfahrungen, wie lange eine Füllung hält, habe ich noch nicht … im Moment ist seit einer knappen Woche kein Druckabfall zu erkennen und ich entnehme zwischen zwei und drei Blasen/Sekunde bei einer Laufzeit von 11 Stunden täglich.Ich hoffe, diese Rezension hilft euch weiter.Edit am 11.02.23: Die Anlage ist heute vier Wochen mit der ersten Füllung in Betrieb. Der Druck ist auf ein knappes Viertel des ursprünglichen Maximums gefallen - in den nächsten Tagen wird also eine Neubefüllung nötig werden. Ich halte mit der Anlage einen CO2-Wert von 20 mg/l in einem 260 Liter-Auarium konstant. Da finde ich eine Standzeit von vier Wochen+ akzeptabel.Positiv ist, dass bei fallendem Druck nicht nachreguliert werden muss, um die Anzahl der ausströmenden Blasen konstant zu halten. Der verbaute Druckminderer ist also auch von guter Qualität.Edit am 04.05.23: Inzwischen läuft an meinem zweiten Aquarium ebenfalls eine FZone. Das oben Geschriebene gilt auch für diese Anlage, die von einigen anderen Rezensenten beschriebenen Probleme tauchen auch hier nicht auf.Die Standzeit hat sich in beiden Anlagen auf 4,5 Wochen bei 20 mg CO2/l im 250 l-Becken eingependelt. Die Neubefüllung dauert jeweils zehn Minuten und ist zur Routine geworden. „Chemieunfälle“ gab es nicht, die Handhabung der Chemikalien ist mit ein wenig Sorgfalt problemlos.Nach Ablauf der chemischen Reaktion kann der Inhalt der Flasche im Ausguss entsorgt werden. Er ist ungiftig und reagiert nicht mehr.Tipp 1: Ein Trichter mit einem WEITEM Auslauf erleichtert die Befüllung mit Natron erheblich. Die Substanz ist sehr feinkörnig und rieselt schlecht, der beiliegende Trichter ist dafür ungeeignet. Die grobkörnige Zitronensäure macht das Problem nicht.Tipp 2: Wenn man die FZone-Flasche während des Betriebs ab und zu schwenkt, lösen sich Zitronensäure und Natron komplett auf. Das erleichtert die Reinigung der Flasche hinterher erheblich. Keine Sorge, es kommt durch das Schwenken nicht zu einer gesteigerten Reaktion mit Überdruck. Ich habe bei der ersten Füllung das Wasser nur zugegossen und die Flasche verschlossen. Die Folge waren große Verklumpungen, die beim Reinigen nicht durch die Flaschenöffnung passten. Auf die Standzeit hat das alles aber keine Auswirkungen.
Ash
Reviewed in the United States on August 4, 2022
I really liked this product for my tank. Despite the lack of instructions it was simple to set up and forget. The solenoid is still going strong, the whole system is very quiet, but I consider the diffuser to be subpar and replaced it. It lasted about 5 weeks for me on each charge. Unfortunately, almost a year to the day it failed me. A fresh charge only lasted 10 days. The next charge only lasted 5 days. I unscrewed and cleaned and checked each gasket and connection and did another charge this morning. I can already see the pressure has gone down significantly.Overall I think it's a great system as long as it works, but I'm not interested in having to buy a new system every single year.EDIT: I actually wanted to come back and bump the review up to 3 stars as I've managed to get almost a full month on a charge with a THOROUGH checking of the nuts, gaskets etc during each recharge. Too bad the solenoid failed yesterday. The wires snapped clean off the housing. It wasn't too surprising seeing as even the heat shrink tubing wasn't on properly.I don't know if I just happened to get one of the bad batches or if the company has a quality control issue, but it has soured me on buying any of the other products I was thinking of buying from them.