Your cart is empty.
Your cart is empty.Product Description
Godox X2T-N I-TTL 2.4G High-Speed Sync Wireless Flash Trigger Transmitter Compatible for Nikon cameras
Godox X2 Series TTL wireless flash trigger can work with Godox camera flashes, outdoor flashes and studio flashes with built-in Godox X wireless radio system. X2 achieves stable, reliable and effective real-time signal transmission which makes it a good choice for photographers who have various lighting demands.Competible Cameras:Nikon camera( I-TTL II autoflash) , work with cameras with PC sync socket
Compatibility for Smarphones, Cameras and Flashes
- iPhone 6S, iPhone 6S Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus iPhone 8, iPhone 6 Plus, iPhone 6, iPhone X; Samsung galaxy S8, Samsung galaxy Note8, Samsung galaxy S9
- HUAWEI P9, HUAWEI P10, HUAWEI P10 Plus, HUAWEI Mate 9 Pro, HUAWEI Mate 9, HUAWEI Mate 10 Pro, HUAWEI Mate 10, HUAWEI P20, HUAWEI P20 Pro
2. Compatible Camera Models (This table only lists the tested camera models, not all Nikon series cameras. For the compatibility of other camera models, a self-test is recommended.)
- D5 D4S Df D4 D850 D500 D810A D750 D810 D610 D600 D800 D800E D700 D300S D300 D7500 D7200 D7100
- D7000 D5600 D5500 D5300 D5200 D5100 D5000 D3400 D3300 D3200 D3100 D3000 D90 D200 D100 D80 Z7
3. Compatible Flash Models (Please Note: Supported Functions should be both owned by X2T-N and flashes.)
- No Extra Receiver Needed: AD600 series/AD400 series/AD360II series AD200 series/V860II series/V850II, V350C/TT685 series/TT600/TT350C QuickerII series/QTII/SK II series, DP II series/GSII
- X1R-N as Receiver(NOT Included): SB910/SB800/SB5000/SB900 V860N
- XTR-16 as Receiver(NOT Included): AD360/AR400(The flashes with Godox wireless USB port), Quicker series/SK series/DP series/GT/GS series/Smart flash series(Can only be triggered)
- XTR-16S as Receiver(NOT Included): V860C V850
DESCRIPTION
Fully Support TTL Autoflash and Pro Functions
Fully support TTL autoflash, 1/8000s high-speed sync, multiflash mode,manual mode, flash exposure compensation, adjusting the lighting parameter through the mobile APP, scan setting, one-shot and multi-shot setting, control of the modeling lamp, adjusting all groups’output value simultaneously,etc
Built-in Bluetooth for APP Control
Using the iPhone/Android-based cell phone, or iPad/Android-based tablets to connect the X2 via Bluetooth after downloading the “GodoxPhoto”APP, you can control the flash mode, power output, the modeling light mode, the beep of Godox flashes,and etc
Type-C Connection
The MicroUSB has been upgraded to a Type-C. Type-C sockets are just much more solid than microUSB, as are the cables. They’re less prone to being damaged or bent. And you can now upgrade the firmware ether in Windows or Mac system.
Quick Lock Hot-Shoe
Godox X2T has the new hotshoe locking mechanism as like as the Godox V1, which automatically locks, and a button to quickly unlock and twist it open to remove it.
Carlos alfredo
Reviewed in Mexico on January 8, 2020
Excelente, todo muy bien protegido y mucho antes de lo planeado. Gracias hasta aquí mi reporte. 😀
Cookiehead Photo
Reviewed in the United States on July 10, 2018
Delivered on time and works as described. When I first put it on my camera and tested it I couldn't get it to trigger the flash, after searching youtube I learned the camera/trigger has to be more than a foot or so away from the flash to function. Not sure why but when I moved the flash further away it worked perfectly.
Dave
Reviewed in the United States on January 12, 2018
I jumped on the Godox train because of all of the good things I see regarding the system within facebook groups and youtube reviews. I have the Sony a99ii and wanted to take my Sony flash off camera, so i paired this purchase with the respected Godox receiver.While I left a more detailed review on the receiver, in short this setup did not support TTL with my Sony Flash. I tried to reach out to Godox for support but i got nothing back (*see below).After talking to more people regarding this problem, I was told that Adorama sells a system branded Flashpoint. Apparently Godox, Flashpoint & Neewer are all from the same source just branded a little different. However Flashpoint comes with US based support, so I picked up the Flashpoint flash and used this remote to control it. I was able to get wireless TTL support with that setup (Yeah!).While it does work, i rather have them both branded the same but more importantly, I want to be able to get proper support should I require it, so i'm picking up the Flashpoint transmitter as well.If you could care less about support and if Amazon is the better buying option for you (both systems cost the same), then get your self this transmitter and pick up a godox wireless flash! Leaps and bounds cheaper than going to the Sony branded system and I did do an entire weekend of test shots, comparing the Sony F58am to the Flashpoint flash. Using TTL and Manual controls, I could not tell a difference between which shots were used.*One point about support, I found a youtuber who was trying to get a response from Godox for over a year! Granted, this system is so cheap, even if you had to buy a replacement unit, it would be cheaper than buying the F60m flash. Getting manufacturer support is the only negative you will find when it comes to Godox
Carlos Cardona
Reviewed in the United States on April 13, 2018
Works great, no connection issues! Connects to the Godox TT685S speedlight and the SK400I monolight to adjust power, what I was looking for! I also got the “C” version for my Canon, and IT WORKS WITH THE SONY RECEIVERS (to trigger my manual Neewer flashes). It was hard getting that info, which is why it’s all caps! Only downside is the translated manual!
Customer
Reviewed in the United States on September 6, 2017
If you're looking at Godox flash triggers, you're probably wondering if you should get this, or Godox's other trigger the XT32. And - since Godox does a god awful job of explaining the difference between the two - you have no idea which to purchase. This is the trigger you want.With this trigger, and the built-in receivers on your Godox lights, you'll be able to control flash power on camera without the need for another receiver. With the XT32, you can trigger your lights, but you won't be able to control flash power without either walking over to your light and adjusting the power, or purchasing a XRT16 receiver for each light. Which makes the XT32 absolutely useless. I have no idea why it even exists since it costs exactly the same as the X1N.If you've bought into the Godox flash system at all (and you really should - I have both the speedlites, and the larger strobes and they are rock-solid), get this trigger. Heck, even if you don't, I'd still buy it over any of the Yonguno triggers and especially over the Pocket Wizards.
Chuck F.
Reviewed in the United States on November 20, 2016
Well designed, well built, works Great, it runs my Good TT685S well. Instruction manual is not bad either. Range is good and haven't had any problems with interference with other wireless devices. setup is quick and easy. thinking about buying addition TT685S now I know this is a system I can rely on!.
Vic
Reviewed in the United States on October 3, 2016
I have bought 2 flashes and an X1 trigger. They work wonders. I have Nikon and Sony full frame (a7rii, a7s, d750) and crop (a6300, D7000, D5300) bodies and have been through my fair share of flashes (native and 3rd party) for both systems. I have a mini-graveyard of DOZENS of triggers and flashes. I make much use of both off-camera manual and TTL (less with TTL though). 1/2000 High Speed Sync (I think it goes even higher though) is great to have, as is the lithium battery. I have gone entire wedding days without losing a bar. I've never actually ever seen the battery at 2 bars (of 3 bars total). It is great to have good refresh rates without concern for depleting the battery, and not have to haul around a big battery pack. Also no more charging trigger batteries and connecting them in between the stand and the flash. If you use one on the camera body you control all groups right from the flash itself, saving another trigger that would be between the body and on camera flash. I'll be getting another couple flashes now that I have fully tested their capabilities. It was a long road to get to a satisfying place in the world of off camera flash, but so far it has been close to perfect as I have ever experienced. That being said, there is ONE thing I on my wish list to make this a perfect product...a metal shoe. It's plastic and even has a hollow notch cutout that can only weaken it. Since I haven't been burdened by it yet, I wouldn't feel it fair to take stars off. However it is expected from premium flashes, which this otherwise handles well as.
Chris Porter
Reviewed in the United States on October 1, 2016
I looked around for a long time for a affordable solution for my Sony A6000 camera high speed sync trigger and lights. This trigger is working perfectly and very good quality . I am using it with my Sony A6000 and my X1t transmitter. I just attached the transmitter to my camera and turned it on with my TT600S speed light and my camera on and it worked ion HSS high speed sync. The lights I am using are the Godox Ad-360ii N and the Godox TT600 speed light. I have been using it for several days now and it is fantastic. Very simple too use.
Recommended Products