KevinCallahan
Reviewed in the United States on August 10, 2024
My parts came with the 767 manual and parts list/specs.-Worked great on my old 767 pump. Good price and now my brand-used leaky k/o pump works again.-Just be sure to know what model number you have as this kit only works with the follower 5032041 stamped on it. I’ve uploaded a photo of where and what number on the follower is need for this kit to work.-If you have a different number you’ll need to purchase a new follower and or another kit with another style/size seals.-Greenlees pump oil cost an arm and a leg but is well worth it unless you have Mobil dte 13 or Mobil dte10 excel32 on hand which is a direct replacement from greenlees&mobils website and in the manual.
○PARTICULAR PERCIPIENT○
Reviewed in the United States on June 30, 2024
As Advertised
Luke Goebel
Reviewed in the United States on November 7, 2023
Bought this to replace the guts of a greenlee 767 that we use every day to punch holes for generator installations. Kit worked perfectly and greenlee works like it is brand new. Also bought greenlee oil from amazon and replaced that as well.
peter G.
Reviewed in Canada on May 3, 2019
Should up in time and it is the original manufacture kit, not a OEM knock off
Xmot
Reviewed in the United States on January 15, 2019
I bought this 30242 kit to rebuild a Greenlee 767 pump. I called Greenlee to determine exactly what kit I needed -- it's serial number dependent. The kit included everything I needed, including the V-packing rings, etc., for the 30241 follower. The pump works perfectly now. Note: When I called Greenlee they told me I would need both the 30242 and 30241 kits. So if you have the pump with the steel 30241 'follower', this kit (#30242) includes everything you need to rebuild it, i.e., the 2 V-packing rings, the bleed screw and its O-Ring. I will be returning the unused 30241 kit.
MDHusker
Reviewed in the United States on September 8, 2017
seems like the correct kit, everything but the V seals. As a foot note on the very back of the instructions there was a note saying, " When using this kit, the Follower 500 3336.0 must be replaced with 503 0241.8, as the 905 0731.2 "V" packing has been replaced by 905 3262.7 "V" packing and cannot be interchanged.I had to spend another $49 to purchase the new follower. This could have been said before I purchased. In fact, the follower and "V" seals is probably all I needed for repair. All of the other seals seam correct and will probably help performance.
Missbdaisy
Reviewed in the United States on December 31, 2016
Bought this kit to rebuild my 767 pump because the pump stopped working it took about 30 minutes to install now it worksIike new.
SC designs
Reviewed in the United States on July 12, 2013
This kit had everything I needed except the follower cups did not fit my existing follower. In fine print on the instructions is a note telling you that the old follower must be replaced with the new style. Which I also had to purchase. I'm sure if I had a newer pump this problem would not have come up. Otherwise I would have rated it a 5.Good kit though and I would recommend it. Just check your serial numbers to see if you have to buy the new follower.
B in Alabama
Reviewed in the United States on December 11, 2012
Our greenlee is extremely old, if I had to guess, 20 years plus.The little workhouse is a staple at our shop and we use it nearly daily to punch 20-12 ga stainless. The seals leaked awful and the fluid just ran out of every fitting.This kit (which came with a tool diagram and part listing) cured our tool, and made it just as good as new. It comes with every O-ring, seal, and check ball you need. It's a complete kit! Very pleased!