Your cart is empty.
Your cart is empty.A very sharp nipper designed for the cleanest possible cuts on gates and excess nubs on model kits, its single blade allows cuts as close to the part as possible with barely any scaring of the surface. Disclaimer: do not use on clear plastic or very thick gates or runners/sprues.
ベベン
Reviewed in Japan on January 4, 2025
片刃ニッパーは３本目。ゴッドハンドを切れ味の頂点とすると、次点。あそこまでのヌルっとした切れ味はない。しかし折れやすいゴッドハンドに比べると、耐久性はあるように感じるから、私にとってはバランス的に◯。
VCARB
Reviewed in Japan on January 27, 2025
切れ味は抜群ですが、片刃でもデザインナイフによる仕上げは必要ですね～。この商品にかかわらず・・
Rob Liggett
Reviewed in the United States on June 2, 2024
I bought these because I wanted to test them out before I got a set of Godhands as a gift in a couple of weeks. (If these were good, I was going to cancel the request for Godhands) As luck would have it, Amazon delivered these the day after my 5 year old son anxiously presented the Godhand SPN-120s early.These don't have the fit and finish that the Godhands do but for just a tiny bit over half the price - they are close enough. A sheath would have been nice but my Tamiya nippers don't have a cover and they do OK.I'm just starting an MG Sazabi Ver.Ka and the results I get from Gunprimer Gate Remover set are great but time consuming. I was hoping to shortcut that process.As usual with GSI Creos, these single blade nippers perform way better than their price suggests. Speaking honestly, the Godhands yield slight better results but definitely not twice-the-price better. You really have to squint to see the difference. I would guess that the Godhands will hold their edge better - but that comes at a price - they are delicate and are known to break when used improperly. Long story made short, I'll keep the Godhands but I'm going to be using these GSI Creos nippers heavily and keep the Godhands for "special" cuts. The GSI Creos single edge nippers are an excellent buy. I would recommend these over the Godhand SPN-120 for a first time single blade nipper purchase.
Barraggan
Reviewed in the United States on December 12, 2024
I use these for my gunpla and it leaves very to sand so it has helped a ton with the amount of work I have to put into my models, great quality and value!
HShield
Reviewed in the United States on November 2, 2024
Very amazing nipper. Figure out the direction and angle to cut the plastic and you almost don't have to sand. I have made whole master grade kits with just this nipper and rubbing the cut parts with my finger nail. No more white stress marks.Let the blade slice through the plastic. If you get any white stress marks, try flipping the part and cutting a different direction.Definitely recommend. Doesn't look like Godhands cut any cleaner. Mr. Hobby's nippers cut very nice and clean.
桃太郎
Reviewed in Japan on October 27, 2024
ニッパが、ヌルッとゲートに入って行く感覚、初体験でした。ゆっくりカットすると、より白化しない様です。
無理問答
Reviewed in Japan on October 13, 2024
初めてのプラモ制作に購入しました。今まで1000円程度の両刃ニッパーを使用していましたが、あまりにも切れ味が違いすぎます。ランナーから切り離す感覚というより、バターを切るような感覚でヌルっと切断できます。白化もほぼほぼなく、ツール１つで快適性がここまで違うのかと驚きました。
Suhao Duan
Reviewed in the United States on August 27, 2023
This single blade nipper is a big upgrade from my double blade nippers. Saved a lot of time from sanding the nubs on the gundam models.And it’s affordable, not as expensive as some of the other brands.Be careful using them because they are fragile. I hope mine will last long.
I Use My Computer Alot
Reviewed in the United States on July 12, 2023
I use these in conjunction with a pair of Godhand PN-125 double blade nippers (which are incredible double sided nippers by the way and also a tremendous value). I have yet to purchase a Mr. Hobby product that I have not been absolutely in love with. This brand is top of the line and has not let me down.New to the hobby, I initially only used the Godhand spn-125 double blade nippers but after about 6 months of experience I have come to understand the value of the single-blade nipper concept. I was shopping and all the other brands were more expensive, the Godhands have rave reviews but cost more than double the cost of these and I didn't want to spend $60 on a single tool. I didn't find too much info on these but trust the Mr. Hobby brand so for about $26 I figured it's a good bet and I was right. These cut through plastic like butter, very precise and no stress marks AT ALL when done properly. They are an incredible value. I have not tried more expensive brands of single bladed nippers but after using these have absolutely no need or desire to because these do the job flawlessly. Even if the Godhands or Dspiae brand are better, the amount they are better wouldn't justify the cost for me because these work so good that any improvement from this is pure luxury and not necessary. These are excellent and I have not been disappointed.One important thing I've discovered about single-blade nippers however (this applies to all of them) is that there are many times you will not be able to make a flush cut because you can't get them into the are in the orientation necessary to do that (due to being limited to one orientation because of the single blade). So I am glad I have my double bladed Godhand spn-125 they can get in there after I've cut as flush as possible with these mt-106 and fi ish the flush cut. Long story short these 2 pairs of nippers work really well together and I suggest you have both types, it's a MUCH better investment to have these 2 pairs of complementary nippers than to have 1 very expensive pair of single bladed nippers. You can buy both the nippers I have for less than the price of 1 pair of Godhand spn-120.Hope this helps
ミヤ
Reviewed in Japan on October 3, 2023
G社や各社色んな所から発売されている片刃ニッパー。クレオスMT106片刃ニッパーは、価格を抑えていますが切れ味もよくコスパ良いと思います。切れ味が落ちても、また買い直す事出来ますし買いやすい金額です。G社のアルティメットニッパーは、良く切れますが値段がね。そういった事も加味すると、クレオスの片刃ニッパーは使い安い商品です。プラモデル初心者にオススメの一本です。切れ味が良いので艦船模型のマストの切り出しや鉄道模型のカプラーや信号煙管のゲートからの切り出しに重宝します。片刃ニッパーの性質上、硬いものや、厚めのプラ板などを切る際は注意がいり、刃こぼれが発生します。メンテナンスキットも販売されていますので、キチンとメンテナンスしてやれば2年位は使えます。
BinaryWizard
Reviewed in the United States on February 9, 2021
The Tool does what it is supposed to do and gives good clean cuts with little or no sprue burr (5 stars for that).However, and consider this a note to the GSI CREO marketing department, it would be quite logical to expect that the company would include the small hex key that is necessary to adjust the blade closure and also provide a plastic cover to protect the blade during storage. Maybe a couple of nitpicks, but for the price of this tool they should have been included.A warning to those purchasing this tool; before you use it, make sure you adjust the amount of blade closure. The closure setting on mine was too much, so I had to adjust it back about a half a turn. Hopefully you will have the right sized hex key on hand, if not be prepared to spend a few more dollars for a hex key set.
Recommended Products
$86.99
$ 39 .99 $39.99