Your cart is empty.
Your cart is empty.Product Description
Meet Adventure with Protection
Protection for the Unique Tesla Headlights for Model 3 / Y
Whether you choose tinted or clear paint protection film, installing this complete set is essential in keeping your adventure vehicle pristine. Easy install makes it worth the effort!
Customers Are Praising the Looks
Whether you wish to protect your headlights from rock chips and scratches or you want to tweak the appearance of your Tesla, this DIY kit is worth the effort!
Fitment
PPF/Tint covers the entire Headlight without wrapping it around. This allows the installation to be completed without disassembling the lights.
What's in the package
Cutouts, squeegee, soap solution spray bottle, and a link to the install video. Everything you need to complete the installation successfully!
Install Difficulty
We rated this PPF / Tint hard to install, because:
- the curves on the headlights are difficult to handle for novices
- heat gun highly recommended
Install Time
The fog lights would take only a few minutes, but the headlights may take 30 minutes or more on each side. Recommended: watch the install video!
What is 30%, 50% and 70% VLT?
Visual Light Transmission & PPF
An important characteristic of tint films is the VLT. It stands for Visible Light Transmission. It means how much of the light in the visible light spectrum will go through that film. For instance, 50% VLT means that half the light will go through the film. The smaller the VLT number, the darker the film, and the less light will be transmitted through it.
Kobe
Reviewed in the United States on February 17, 2025
Bought this to black/murder out my tesla and The material is like ppf, It’s good quality material. The tint Was decently dark i wish i would’ve gotten the darker one but wtv. The tint barely affects visibility if not at all in my opinion. If you’re worried about visibility or quality don’t. It’s good Quality.
Sarah
Reviewed in the United States on January 7, 2025
70% is barely noticeable on the headlights. %50 would have been much better. %70 really looks clear IMO. Oh well. At least my headlights are protected and the install was fine with their video on the website.
Pedro Mayoral
Reviewed in the United States on January 20, 2025
I recently cracked a headlight with road debris and replaced it. Figured I would put some PPF in case it were to happen again, and thought to myself, why not get some tinted PPF. Super happy with the quality; you can tell it’s made with quality materials. It looks great, it fits great, it stuck great, and very little tools needed. BE PATIENT. Don’t be afraid to peel it off as you’re applying, re-wet, and re-work an area or the whole thing if it’s not going to your liking.
Paul costa
Reviewed in the United States on January 15, 2025
The product is good and installation was easy enough.My only complaint is that medium smoke isn’t noticeably different than the stock headlights on a black vehicle. The pictures should do a better job of reflecting this.Update- the seller contacted me and sent darker covers and they work perfectly for the blacked out look I was going for.
dice6
Reviewed in the United States on February 19, 2024
Took me 45 minutes to install and I’m definitely a novice. Make sure to clean the light lens with alcohol pad and use a lint free towel if necessary. I used a drop of Dawn soap with water and sprayed the light lens and the back of tint film. I aligned the bottom front of the lens first and used the squeegee to remove the water and bubbles from the tint film. I made sure to remove the soapy water outwards starting from the middle of lens. Spray additional soapy water on the tint film when using the squeegee. I decided to finish the top curve of the lens last as it required molding and more care. Keep working on it to stretch the tint film on to the curve of the lens. I decided not to use a heat gun and used the soapy water to mold properly on the lenses. Keep spraying soapy water and use the palm of your hands to mold as necessary (like clay). Check for bubbles. Let it dry properly. Overall, it looks great! I used the light smoke tint, 70% VLT.
Al
Reviewed in the United States on October 25, 2024
These PPF covers were not to bad to install. I screwed up the passenger side and I reached out to customer service and they sent me a replacement kit so fast. They didn’t question me or give me a hard time about my mistake.A bit of advise TAKE YOUR TIME !!! Watch the video
Brittaney John
Reviewed in the United States on October 10, 2024
For a first timer, it’s very user friendly. However, it’s very time consuming if you want it to turn out “perfect.” No air bubbles! Final product is amazing!
Orbital
Reviewed in the United States on April 18, 2023
This took a lot of patience. It is all about finding the perfect equilibrium between being lubricated and dry. I originally ordered the light smoke and it was not much different from the stock headlights of my 2023 model 3 performance. I messed up the first time as well, and emailed the company. They responded extremely fast and were extremely helpful. They even sent me the medium smoke for no charge! They gave me more detailed instructions and told me to practice with the light smoke that I still had while I waited for the medium smoke to arrive. The tint comes with a spray bottle that has some soapy chemical in it, and you add water to it. My advice is to get a second spray bottle and fill it with distilled water, so you can adjust the level of soap/water on the go. Also, I ended up using a heat gun to warm up the tint for about 30 seconds before applying. This helped A TON!!!!!!!!!! Take your time, be patient. Work from the top down. Line up the top corner first and let that stick before finishing the bottom. Squeegee the air bubbles out the way they want to naturally go, but make sure you keep that top corner in the correct spot as this is crucial to a successful application. You will know if you need to spray the distilled water if it’s not sticking, and vice versa if it starts sticking too soon, lather it up with more soapy water. That’s basically it. Take your time and line it up nice. The tint is pre cut perfectly. No need to cut it.
Recommended Products