Your cart is empty.
Your cart is empty.The Hi-Lift Jack Adjustable Tube Mount system is designed to allow secure mounting of Hi-Lift jacks to tube bumpers, bull bars, roll cages or roof racks. Manufactured from 6061-T6 structural aluminum with stainless steel hardware. Fits tubing 1 - 2 inches in diameter.
Paul Bess
Reviewed in the United States on June 18, 2024
Have yet to use, but look robust and will do a good job of holding jack. More durable & adjustable than other alternatives for my application in my opinion.
Marshall Nichols
Reviewed in the United States on December 23, 2024
I decided to go a different route, but this is a great well built mount
JP
Reviewed in the United States on December 31, 2023
Used these to mount a Jack inside the bed of my truck, using the bed anchors. (There are videos online - you’ll also need some bolts and fender washers.)All in all, takes less than 15 minutes and the jack is out of the way.
Mike
Reviewed in the United States on September 27, 2022
Mount is well made, installed fairly easy, does what I need it to do…..hold my jack!! I would recommend this to anyone looking to mount a hi-lift jack on their rig. Very happy!! I use on an Articat Prowler side by side for around the house and property(100 acres) for chores and hunting.
Wayne J Mcqueston
Reviewed in Canada on March 13, 2020
Easy to install. Easy to mount the Jack
J. Isabelle
Reviewed in the United States on September 5, 2019
One came with some grooves on it but everything I own gets scratched up eventually so can't say I care if it doesn't interfere with function. Speaking of function, they seem strong and twist down tightly. I resisted the urge to crank them down with all my might but the urge is there and I've checked them probably 4 times already.To my surprise, I decided to use them to mount the jack on the front bumper (rather than the rack as originally planned). On the bumper, at a 45deg angle, I can easily set the jack on the mounts and let gravity hold it in place while I put on the lock washers and crank bolts or, when I really need it and am already frustrated, remove the jack easily.One thing that bothers me (and this is more my problem really): lock washers scare me. I prefer nylon insert lock nuts. These mounts come with the former for fastening the loops to a bar and most of the mobile world is held together with lock washers so I don't know what my problem is.
Customer
Reviewed in Mexico on July 15, 2019
Muy bueno, muy resistente, no se afloja nada, super !!
Jordan
Reviewed in Canada on April 2, 2019
I used these on my Thule Xsporter pro truck rack, I had struggled to find some way to attach my Jack to the box rack and this worked great.
Marco gomez
Reviewed in Mexico on March 15, 2018
Me llegaron tres abrazaderas de la misma medida y quedo muy corta. De la medida necesaria sólo llegó una abrazadera (3pulgadas) por lo que fue complicada ajustarla. Sería bueno me enviaran mi abrazadera de 3”
Customer
Reviewed in Canada on February 23, 2018
nice mount , well made , Hi-Lift product quality !
E
Reviewed in the United States on June 2, 2016
excellent, worked to mount a hi lift on the rear of my safari rack on my tacoma cab, it is a 1" round tube and it fits snug with no movement. I have the mounts positioned horizontally outward so the jack sits sideways and the mounts hold it securely, i had originally been concerned that that mount was intended to be used vertically as the mount is pictured however it holds tight. Once tightened the u bolts clamp solidly onto your mounting point, and if lined up properly the jack will not budge. My rack doesn't move on my truck, so when i jiggle the jack on its mount, the whole truck moves. Solid. Haven't needed my jack since I put it on so it has stayed there, and no change whatsoever after months of daily driving and several long offroad trips.On a side note I didn't purchase the hi lift locking knob as the reviews for that product stated it was flimsy plastic, and the strength of this mount is that the knobs are heavy duty and need to be tightened fully to properly secure the jack. I just used a long cable lock (gun lock) and looped it through the holes and around my rack snugly before locking it, there are better solutions i'm sure but it will deter all but the most serious thieves.Make sure to get a handle isolator too especially if you plan on carrying it external to the vehicle, with a combination of that and placement of the mounts around the moving parts, you will minimize rattling and safety hazards.
Zac R.
Reviewed in the United States on February 13, 2016
I have a custom built roof rack that a buddy of my welded together and is super strong but lightweight, since it is aluminum. I was unsure how tight this would hold on the 1" round tubing it is built of because of the design but once cranked down these things are LOCKED!!! I have my 48" Hi-Lift across the back of the rack on my XJ and have even hung from it and these brackets don't budge at all. I then ran a chamber lock from one of my pistols through the Jack and around a tube on the rack to keep it from being stolen, it works perfect and is easy to take off when needed.I want to order some more the attach a shovel and ax to the side and I will just drill holes through the handles.
Dan Linegar
Reviewed in the United States on August 25, 2013
Fully machined mount assembly that does a great job holding hi lift jack on my front bumper. Only issue relates to the fully machined aspect, that requires the mounts to be perfectly aligned to match up to the holes in the jack arm. Takes some work to find best location on the bumper, and after a few trail runs, need to readjust. Not a big deal, just comes with the machined design.
Recommended Products
$26.99
$ 13 .99 $13.99
$53.97
$ 26 .99 $26.99