Your cart is empty.
Your cart is empty.Product Description
Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to eliminate spinning and the need for a driving tool. The galvanized finish provides optimal rust prevention but can be chalky in appearance.
From the Manufacturer
Carriage Bolts have a smooth, rounded head that has a small square section underneath. They are used in wood connections utilizing the square neck under the round head which will sit into the hole to prevent the head from turning. These carriage bolts come plated in zinc for moderate corrosion resistance.
Bob Leininger
Reviewed in the United States on April 21, 2022
The bolts were almost all fine ... 3 out of the 25 had threads that were messed up and I couldn't screw on the bolt, do they were tossed, but most were great
Tracy
Reviewed in the United States on December 9, 2021
Well made with nice clear threads
rick wallace
Reviewed in the United States on September 19, 2020
Build a bridge worked perfectly
steven olson
Reviewed in Canada on September 1, 2020
This is not 3/8” it is 10mm the threads are metric not imperial and was very annoying as it cost me time and money to purchase the wrong ones
unsatisfied
Reviewed in the United States on May 26, 2020
these were way less expensive than lowes
Tom Hunter
Reviewed in the United States on July 27, 2019
The price was good but the threads as others have noted were not real clean. I used the coarse thread nuts on these and other bolts I purchased from a local box store. Threading the nuts on was easy to spin on the box store carriage bolts but did not spin on as easy on these China made ones. I used the same nuts on both sets of carriage bolts. In addition some threads on 2 or 3 bolts were not useable because the threads were clogged with debris (bad die cut). However, to lose about 2 - 3 bolts out of 50 not bad. Price was half the price of box store so that's a plus. I will try to upload later a photo of bad bolts.
Steve
Reviewed in Canada on June 19, 2018
Works great, if you need nuts, just go to the hardware store and match them up. Worked fine on over 5 bolts I've tried so far.
StarvinMarvin
Reviewed in the United States on June 30, 2017
just went through nearly the entire box of 50 and no defects at all - no burrs, no bad cuts, no mashed threads, no breaks (I torqued down about 1/16 - 1/8 bite into treated pine), no problems - and the cost was about 2/3 the box stores. If they had them when you needed them.
Scott W.
Reviewed in the United States on July 13, 2015
Just what I wanted. I first bought these at one of the local big box stores. For the same box of 50 pieces it was over twice the money. These came in the exact same box of 50 pieces that the ones from the big box store came in. GREAT DEAL!!!!
steveinriverside
Reviewed in the United States on May 19, 2015
Do their job just as expected. No issues.
Recommended Products
